Question about Dodge Intrepid

1 Answer

Looking for a diagram indicating where the thermostat is located on a 2000 Dodge Intrepid

Posted by on

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,400 Answers

Try this - http://www.dodgeintrepid.net/photopost/data/512/16642g_cooling.gif

Posted on Mar 12, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need instructions to replace the thermostat in a 2000 Chrysler (not Dodge, this was a canadian car) Intrepid


What size engine? If it is a 2.7 the thermostat is located at bottom of engine. Follow lower hose to engine block your housing will be located there. This is how my intrepid was.

Jun 28, 2016 | Chrysler Cars & Trucks

1 Answer

Diagram of 2000 Dodge Intrepid rear suspension


depending on what you need. I found these diagrams available to look at. I found this to be a good link as well.

2000 Dodge Intrepid rear diagram Google Search 2000 Dodge Intrepid rear 053648d4-517c-42ac-b0ef-434f56531f71.gif 2017f127-e66e-4636-b63f-079f0bb0bda3.gif

Jun 10, 2014 | 1999 Chevrolet Monte Carlo

1 Answer

Belt diagram for 2.7


here is a diagram www.google.com belt diagram for 2.7 2000 Dodge Intrepid

Jun 29, 2012 | 2000 Dodge Intrepid

2 Answers

Looking for a picture of the diagram of where the thermostat is located on my 1998 2.7 liter dodge intrepid PLEASE!!!!!


Hi, I don't have a picture, but trace the big hose from the bottom of the radiator to the engine, and it will be under the housing where the hose connects.


2.7L Engine

  1. Disconnect negative cable.
    CAUTION Do not remove pressure cap with the system hot and under pressure because serious burns from coolant can occur.
  2. Drain cooling system.
  3. Remove radiator lower hose from thermostat housing.
  4. Remove nuts from heater tube flange studs.
  5. Loosen starter bolt at heater tube bracket.
  6. Pull heater tube out of thermostat housing and position out of the way.
  7. Remove bolt and two studs.
  8. Remove thermostat housing, O-ring and thermostat.
  9. Remove thermostat housing bolts.

To install:
  1. Clean gasket sealing surfaces.
    NOTE Install thermostat with the bleed valve located at the 12 o'clock position, between tabs on seal.
  2. Install thermostat and seal into thermostat housing .
  3. If removed, install two studs.
  4. Install thermostat, thermostat housing and O-ring and bolt. Tighten attaching bolts to 105 inch lbs.(12 Nm).
  5. Lubricate new heater return tube O-ring with coolant.
  6. Position heater return tube flange over two studs. Install nuts.
  7. Tighten retaining nuts to 53 inch lbs.(6 Nm).
  8. Tighten starter bolt to 40 ft. lbs. (54.3 Nm).
  9. Connect the lower radiator hose to the thermostat housing. Install hose clamps.
  10. Refill cooling system.
  11. Inspect for leaks.
  12. Connect negative cable.

Mar 26, 2011 | 1999 Dodge Intrepid

1 Answer

Over heating 2000 Dogde Intrepid 3.2L


Hey Ninja,,, a bad thermostat will not cause the belt to break,,. BUT a locked up A/C compressor will, anything that is locked up or not freely working will cause the belt to break.. MAYBE the water pump is locked up and you are forcing it to try to turn.. this will give you the symptoms you describe..

Jul 06, 2017 | 2000 Dodge Intrepid

1 Answer

Where is the heater core located and where is the thermostat located on 2000 intrepid? can i change these myself? is it easy or difficult?


replace the thermsostat, if that doesn't solve the problem you have a blown head gasket, it sounds like combustion gases are getting in the cooling system.

Oct 27, 2009 | 2000 Dodge Intrepid

1 Answer

Where is the cam sensor located for 2000 dodge intrepid


As you are looking at the engine, it'as on the right front of the valve cover, very easy to change.

Aug 04, 2009 | 2000 Dodge Intrepid

3 Answers

THERMOSTAT PICTUREDIAGRAM OF 1999 DODGE INTREPID, 2.7 ENGINE SIZE


It is located on the left side of the engine down where the lower rad hose meets the engine block. It is fairly difficult to change.

Oct 02, 2008 | 1999 Dodge Intrepid

1 Answer

WHERE COULD I FIND THE THERMOSTAT ON 1999 CHRYSLER INTREPID


under the alternator on the side of the block

Oct 01, 2008 | 1999 Dodge Intrepid

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

200 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...