Question about 1996 Mercury Sable

1 Answer

Program remote keyless entry

Hi , i need to program a remote keyless for my 1996 mercury sable ls

Posted by on

  • 3 more comments 
  • Anonymous Jan 17, 2009

    just bought a used remote for my car how do i program it

  • Anonymous Mar 12, 2014

    program remote 2013 impala

  • Anonymous Mar 13, 2014

    I am looking for the keyless entry code

  • Anonymous Mar 14, 2014

    programe keyless entry

  • Anonymous Mar 27, 2014

    code 1506

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 1 Answer

1) Turn key from OFF to ON eight times within 10 seconds ending in the ON position.

2) After doors lock then unlock, press any button on the
remote being programmed.

3) The doors should lock/unlock to confirm programming.

4) Turn key to OFF and door locks should cycle one last time.

Posted on Aug 17, 2008

  • Paris Revels
    Paris Revels Nov 21, 2013

    THANK YOU. IT WORKED.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where do u find the code for Keyless entry for 2004 Mercury Sable Ls


open the trunk and look on the trunk lid supports for the code from the factory 5 digit

May 06, 2015 | Mercury Cars & Trucks

1 Answer

1999 Mercury Sable Keyless entry wont work


I only have the instructions. If it won't program you may have a problem in the module. In that case see the dealer for testing and diagnosis

. Turn ignition from OFF to RUN 8 times within 10 seconds, with the 8th time ending in RUN.
Door locks will cycle to confirm programming mode. 2. Within 20 seconds press any button on first keyless remote. Door locks will cycle to
confirm programming.

3. Within 20 seconds, press any button on second keyless remote. Door locks will cycle
again to confirm programming.

4. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.

Jul 03, 2012 | 1999 Mercury Sable

1 Answer

I have a 96 ford conversion van with a 600 plus addon keyless system and need to program new keyless remots , need to know how to get system in program mode.


Hi.

To program ( or reprogram ) a keyless entry remote transmitter into the remote keyless entry module, perform the following steps:

1. Turn the key to ON or ACC and short the two terminals of the program connector, a two-pin connector located below the driver's side of the instrument panel at the base of the steering column. All doors should lock and then unlock.
2. Press any button on each keyless entry remote transmitter in turn. All doors should lock and then unlock. If the door locks do not respond, press the button again (up to three times maximum with the same keyless entry remote transmitter). If the door locks still fail to respond, go to Pinpoint Test A.
3. Repeat Step 2 to program additional keyless entry remote transmitters into the remote keyless entry module (up to four keyless entry remote transmitters maximum).
4. Turn key off.
5. Remove the short from the program connector. All doors should lock and then unlock.
6. Verify that the keyless entry remote transmitters have been successfully programmed by pressing the LOCK or UNLOCK button on each one, and observing that the system responds by locking and/or unlocking the doors.


I hope this helps you.

Thanks!

Nov 28, 2010 | 1996 Ford Econoline

2 Answers

Mercury sable keyless entry code 1996


check under the dash or under the glove box there is a keyles module black box with white sticker, there is a second sticker with the 5 digit code
it is also in the trunk lid right side on a small white sticker in some cars not all

Apr 01, 2010 | 1996 Mercury Sable

1 Answer

Codes for keyless entry on a 2001 merc sable


the numbers are on the keyless module in the trunk, it is a paper tag

Jun 01, 2009 | 2001 Mercury Sable

1 Answer

96 sable wagon keyless entry


Try re-programing the system.
These are the instructions from the service manual.

. Turn ignition from OFF to RUN 5 times within 10 seconds, with the 5th time ending
in RUN. Door locks will cycle to confirm programming mode.

2. Within 20 seconds press any button on first keyless remote. Door locks will cycle
to confirm programming.

3. Within 20 seconds, press any button on second keyless remote. Door locks will
cycle again to confirm programming.

4. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.

Mar 02, 2009 | 1996 Mercury Sable

2 Answers

Program keyless remote for 94 Grand Marquis


On this model you will have to open glove box and press the tabs on each side so that you can open it all the way open. You will see a 2 wire grey connector behind it.
Turn ignition switch to run postion then take a paper clip or something like that and momentarily short the 2 wires together.
The door locks should then cycle from lock to unlock.Remove the paper clip then press one of the buttons on each remote. When you press the button on the remote door locks should cycle again to confirm that it programed.Then when finished turn off the ignition switch and door locks should unlock to confirm you have exited programming mode.

Feb 20, 2009 | 1996 Mercury Sable

1 Answer

2001 Mercury Sable Keyless Entry-Fuse


check this fuse first. I believe it's #30. Check with chart on fuse panel cover or in your owner manual.eb303fa.gif

Jan 10, 2009 | 2001 Mercury Sable

1 Answer

Door locks open by themselves randomly


some possibilities

The power door locks may self-activate or cycle on some vehicles. This may be caused by a misadjusted front door lock linkage, excess solder in the front door power window switch, water infiltration of a potential open wire harness connector inside the front doors, wiring harness chafe on the door check strap, or a damaged Remote Keyless Entry (RKE) key fob.

Nov 16, 2008 | 1996 Mercury Sable

1 Answer

2003 Mercury Sable, Driver's side remote keyless entry keypad not functioning


Doubt its a fuse. Most likely the key pad has failed and needs to be replaced. On the bright side this is a good problem to have and you have a very reliable car.

Oct 09, 2008 | 2003 Mercury Sable

Not finding what you are looking for?
1996 Mercury Sable Logo

Related Topics:

918 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

63801 Answers

Fordexpert

Level 3 Expert

5331 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...