Question about 1996 Chevrolet K1500

1 Answer

Cant get the truck out of park. won't go in to gear. the shifter won't move at all, even with the break to the floor.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    MVP:

    An expert that gotĀ 5 achievements.

    Master:

    An expert who has achieved Level 3.

    Sergeant:

    An expert that hasĀ over 500 points.

  • Master
  • 461 Answers

CHECK THE LEVER ARM CONNECTED ON THE SIDE OF THE TRANS MISSON THAT MOVES IT INTO GEAR

Posted on Mar 12, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Shifter went limp now cant shift out of gear feels like broke inside.. shifter knob does a circle motion now cant even move shifter knob like i normally would.. i had to pop clutch to get truck started...


you have to know if the problem is inside transmission or outside
first under truck unplug shifter cable then try to move the manual lever of transmission near the pan but have hand brake on so the truck won't run over you.
if the problem is inside the transmission could be the parking pawl nut to manual shaft too much end play
if it outside transmission could be trans, cable or linkage
hope it helps

Oct 15, 2013 | Chevrolet Blazer Cars & Trucks

1 Answer

Jeep wrangler 2005 automatic floor gear shifter is loose won't engage stuck in park


try pushing the knob down onto the shifter a little bit then try and shift. Sometimes if that knob is raised even a little bit it will be locked in park. Can't be 100% sure without seein it but worth a shot. Hope that helps you.

Oct 02, 2012 | Jeep Wrangler Cars & Trucks

2 Answers

My gear shifter won't move out of park on my 2006


http://www.custombilletstore.com/produc
t_p/1028.htm


This problem also happened to me. However, I found the part online that replaces the second pink lever. The new part is made of metal so the part will never break again. I made the emergency fix with the dremel, ordered the part, and a week later the part came. I am making the permanent fix today. Follow the link above to order the new part. It costs around 49.00 including tax and shipping. It will take you appx 2 hours to remove the shifter, change the part, and reinstall.

Aug 05, 2011 | 2006 Chrysler Pacifica

1 Answer

GEAR SHIFT STUCK IN PARK HAVE NO BRAKE LIGHTS


check the fuses as if the brake light fuse is blown it won`t allow the shifter to move out of park.it has a shift interlock system so the gear shift won`t accidentally be moved out of park by mistake.

Jul 17, 2011 | 2000 Lincoln Continental

1 Answer

I pulled up to drive way i moved shift gear to park but it got stuck on reverse. i tried to move it but i would't i pulled hand break up and turned off truck. i turned truck back on and it would not start...


Sounds like your shifter assembly got in a bind. depending on what type of vehicle it is there should be a cable going from the brake pedal assembly to the shifter which will release it and allow you to shift. Also on most floor shift models there will be a manual override button on the shifter assembly itself you can push to release the shifter without have the key in the ignition.
The reason it won't start is because you need to be in neutral or park to do so. I would first look for the manual button but if not, your going to have to take off whatever is necassary to get to that brake cable and release it. hope this helps

Aug 19, 2010 | Chevrolet TrailBlazer Cars & Trucks

2 Answers

Cant get my gear shift out of park on my 2003 aztek


turn the key on 1 position from off and attempt to move the shifter if you can move the shifter you have a faulty park lock solenoid (even if u can move the shifter it still more than likely is the park lock solenoid) have it replaced this is a nuisance yes but does not in any way affect the safety and operation of the vehicle

to use it with the faulty part turn key on 1 position move shifter to neutral and start car then move shifter to desired position

Jan 04, 2010 | 2003 Pontiac Aztek

4 Answers

In my 2003 ford escort zx2, its stuck in park and will not change gears. it starts the brake lights come on. but it won' change gears


my car got stuck in park several times, i'm the brake lights would come on but i couldnt push the button to make my car move out of park...there's a tab on the right side at the top of the gear shifter console pop it out, stick a skrew driver down in and that should release it if that's your problem...it's a little bit of a rig, but it works, havent been stuck in park since

Nov 25, 2009 | 2003 Ford ZX2

1 Answer

Floor Model Shift Lever will not Shift back into gear, '01 Grand Prix, Automatic, 6 cyl.


Foot on break is the obvious fix, when you press the break pedal you should hear a noise near the shifter which is the switch that releases the shifter, this switch is fused off the break-light fuse I think. Or there maybe weight on the transmission jamming it in park or in gear, is it parked on a hill?

Jul 13, 2009 | 2001 Pontiac Grand Am SE

2 Answers

Gear locks when i park on even a slight incline


ALWAYS engage the Parking Brake BEFORE putting car into "Park". When you want to get out of "Park", put your foot on the brake pedal, move gear shifter into desired gear, THEN take down Parking Brake. If you get stuck (gear shifter doesn't move), then try the "rocking" method (recruit 1 or 2 folks to push your car from behind while you try to move gear shifter into desired gear). Good luck!

May 26, 2009 | 2004 Jaguar S Type

2 Answers

Gear shifter does NOT shwitch from park and break


SHIFTER LOCKED IN PLACE

  1. Remove the instrument panel cover below the steering column, then remove the steering column shrouds to gain access to the brake transmission shift interlock (BTSI) solenoid. The solenoid is part of the interlock cable assembly.
  2. Disconnect the wire connector from the rear of the BTSI solenoid.
  3. Insert the ignition key and turn it to the ON position.
  4. With the brakes applied, try moving the shifter out of the PARK position.
    • If the lever now moves freely in and out of PARK, perform the Circuit Test below.
    • If the shift lever still does not move from the PARK position, remove the BTSI solenoid from the shift lever assembly. If the shift lever now moves freely in and out of the park position, the BTSI solenoid is faulty and the interlock cable must be replaced. If the shift lever still does not move from the park position, the problem is in the shift lever assembly or the ignition interlock cassette

May 09, 2009 | 1998 Honda Accord

Not finding what you are looking for?
1996 Chevrolet K1500 Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...