Question about Ford Escort

1 Answer

95 ford escort problem with the cluch, friend said it might be out of fluid. can not find cluch master cylender to put fluid in

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 158 Answers

The clutch slave cylinder gets it fluid from the "Brake Master Cylinder" resevoir. If the fluid is out there is possibly another problem. Anyhow, there is a bleeder plug on the slave cylinder, make sure the brake resevoir is full and the lid is secured back on then have a friend work the clutch pedal in as you loosen the bleeder on the clutch slave cylinder. Only have the person working the clutch pedal release the clutch after you have retightened the bleeder. AND FOR GODS SAKE AND YOUR OWN DO NOT HAVE THE VEHICLE RUNNING WHEN PERFORMING THIS!!! Many heads have been crushed due to stupidity, not thinking and getting in a hurry.

Posted on Mar 11, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 ford ranger edge v6 goes into gear off won't when started


the hydrolic cylender might be out of brake fluid. by the master cylender you should have a small jug that should have brake fluid. if empty you got a leak. if full you will need a new clutch.

Jan 25, 2013 | Cars & Trucks

1 Answer

The clutch pedal seems to be very flopy and is not going into gear easily


Can be broken spring on the cluch pedal in side the car, that hold the pedal all the way back for full amount of brake fluid to the slave cylender, can be checked by pulling the pedal all the way up before steping it to the floor and putting in to gear or just look up under the daschbord on the pedal. Can allso be to little brake fluid in container. To check the master cylender rubber, step on the pedal putt in gear with engine running and wait with pedal all the way to the floor, if the rubber is gone the car wil start to go after some time (1/2-1 min or less) To check the slave cylender rubber will be dune the same way and working same way but it will be leaking out and on the floor.

Jun 18, 2012 | 1999 SsangYong Korando

1 Answer

Where do i put the clutch fluid in my diesel s reg for escort


POUR BRAKE FLUID IN THE CLUTCH MASTER CYLINDER WHICH IS BRAKE MASTERCYLINDER THATS WHERE YOU POUR CLUTCH FLUID WHICH IS BRAKE FLUID.

Nov 04, 2011 | 1999 Ford Escort

2 Answers

CANT FIND WHERE TO PUT CLUTCH FLUIDON 99 FORD ESCORT


It is close to the firewall on the drivers side of the vehicle (most vehicles) it will look almost identical to the brake master cylender just a much smaller scale. Add your fluid their.

Jun 20, 2009 | 1999 Ford Escort

2 Answers

Where to put break fluid in the ford focus 2000


you put brake fluid in master cylender on driver side firewall . should not need brake fluid unless you got a leak or pads are worn down .

May 06, 2009 | 2004 Ford Focus

1 Answer

1998 ford escort clutch


There are 2 master cylinders on the escort, one for brakes, and the other for the clutch. You put the fluid in the master cylinder.

Apr 25, 2009 | 1998 Ford Escort

1 Answer

95 Ford Escort Transmision problems


Sounds to me like clutch is not freeing up if you turn off motor & it goes straight into gear. Did you replace all clutch parts plate pressure plate & realease bearing its almost like there is not enough travel on master cyl or slave cyl if clutch is OK

Jun 07, 2008 | 1995 Ford Escort

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

190 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...