Question about 1990 Ford F350
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The haynes book is not recommended since there are numerous mistakes and they still will not update. One of the biggest is the firing order.
The factory service manual is the only way to go.
Head bolts - 46 - 50.5 lbs (there is an order sequence for the bolts)
Intake & exhuast manifolds- 13.5 - 20 lbs
Flywheel - 41.5 - 47 lbs
Clutch cover - 13.5 - 20 lbs
Posted on Mar 17, 2009
SOURCE: I need the bolt torque specs
go to the local auto parts store and purchase a Chiltons Repair Manual on your car, it has all the torque specs listed for this. Or you could try the library and see if there is one there for your car and just look it up for free..... just write it all down.
Posted on Oct 13, 2008
1.Flywheel - 61 to 69 Foot Pounds
2.Pressure Plate - 25 to 33 Foot Pounds
3.Bell Housing - No specs found. I would say 25 to 35 foot pounds should be sufficient.
Bolts clean on ->flywheel to crank, ->pressure plate to flywheel, and ->bell housing to back of engine, I would use TWO drops of Loctite Red threadlocker, on ALL of these bolts.
Hope you have an alignment tool for your clutch disk when you install it. Auto parts stores sell the plastic one's cheap! Saves a LOT of headaches!
Tighten the pressure plate EVENLY! Snug the bolts down until they just TOUCH, then go in a criss-cross pattern when tightening. Do the tightening in incremental stages! You turn one bolt one thread, you go across to the opposite side, and turn that bolt one thread. Keep criss-crossing so the pressure plate goes down EVENLY. (YES, it's a pain in the keister!)
If NOT, you'll have a warped pressure plate, and it will be junk!
Thanks for letting me say that, I feel better.
Posted on Jul 07, 2009
Tips for a great answer:
Dec 05, 2016 | 2006 GMC Canyon
Dec 18, 2015 | Ford Cars & Trucks
Dec 18, 2015 | Cars & Trucks
Nov 07, 2015 | Cars & Trucks
Sep 06, 2013 | 2002 Kia Sportage
Oct 31, 2012 | Nissan Frontier Cars & Trucks
Apr 08, 2011 | Ford F-250 Cars & Trucks
Mar 27, 2011 | Isuzu Trooper Cars & Trucks
Oct 08, 2009 | 1997 Ford F150 Regular Cab
308 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: