Question about 1992 Honda Prelude

1 Answer

Working on Honda Prelude 1992 with a 2.2 motor can't get bolt off crankshaft pulley wanting to know if it is left or right handed threads

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 359 Answers

It is standard thread (right handed) and a little more information if you need it: there is a hole on the rear of the block on the drivers side located just behind the rear balance shaft so you can lock your engine #1 cylinder @ TDC with a 6mmX100mm bolt or screwdriver. there is a hole machined into the balance shaft that holds everything still so you can get done....I would also recommend the use of an impact....IT IS TIGHT!!!

Posted on Mar 11, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why crankshaft pulley come loose ?


check the bolt holes and bolts to inspect for damaged threads and repair or replace as needed. if this is good you may need to add Loctite to the threads of the bolts. use blue Loctite as this will allow removal later on if you need to remove the bolts.

Aug 23, 2014 | 1998 Honda Prelude

1 Answer

Crankshaft pulley bolt


just put the impact in revise and it will come off

Nov 04, 2012 | 1991 Honda Accord

1 Answer

Is the bolt on the crankshaft pully right or left hand threads?


The crank pulley bolt on most Honda engines are very difficult to loosen. Most 1/2" impact guns are just are not strong enough to loosen them. The choice is yours to either use a 3/4" impact gun, the bolt is left losey, righty tighte

May 30, 2009 | 2002 Honda Odyssey

1 Answer

Is the crankshaft pulley aright or left handed thread


The bolt in the middle is usually counterclockwise. Standard thread removal.

Feb 19, 2009 | 1998 Ford Ranger SuperCab

2 Answers

Honda accord ex 92


Crankshaft pulley (harmonic balancer) removal- disconnect neg battery cable, remove belts, it would be a good idea to soak the bolt w/ penetrating oil overnight, there is a special 'crankshaft pulley holding tool' available to secure the pulley while removing and installing the bolt. Some parts stores loan tools for free if u purchase parts from them, I don't know if this is available, but it would be worth checking out. Attach holding tool and remove bolt securing pulley. Carefully remove pulley from crankshaft, Do NOT pry off. Remove key from crankshaft sprocket,
Install: install key on crankshaft sprocket, slide pulley on, apply clean oil to bolt threads but NOT to washer contact surfaces, secure crankshaft w/ holding tool, tighten to 159 ft lbs (91-93 Accord), install belts, re-attach neg cable.

Nov 11, 2008 | 1992 Honda Accord

2 Answers

Timing belt alignment and crankshaft pulley


timing belt alignment and crankshaft pulley

Sep 08, 2008 | 2004 Chevrolet Aveo

2 Answers

Crankshaft pulley


Tighten to spec (very tight...) and with the right tools. Or just get a new one. Something could be faulty with the one you have.

Jul 31, 2008 | 2000 Honda Prelude

Not finding what you are looking for?
1992 Honda Prelude Logo

Related Topics:

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...