Question about Ford Explorer

1 Answer

Brake light wont come on after replaced bulbs and checked fuses in panel

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,421 Answers

Hi,
Now please check your brake switch for malfunction. The switch is located under the trunk on your brake pedal. You may have weak spring on it, or it is corroded and need replacement. Check also the loose connection on wires.
Regards, Jay

Posted on Mar 11, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lowbeam headlights wont work, brake lights are out and check engine light is on...changed th dimmer switch, no luck


For the low beam problem, Swap relays 45 & 46 in the underhood fuse panel. Relay 46 is for the Low Beams. If that fixes the light, replace the relay that cam out of position 46.
Since the high mounted brake light is working, that indicates that the brake switch is good. You need to check the bulbs in the rear tail light assembly, if they are good, check fuse #34.

Sep 01, 2012 | 2004 Chevrolet TrailBlazer

1 Answer

I have a 91 ford f150 and the brake lights wont work and the rear right blinker is dim. Can you help me?


Check System Fuse - A fuse is used to protect the brake light circuit from amperage overload. If the fuse has failed it will not allow the electrical current to continue to the brake lights. To check the fuse, first locate the brake light system fuse in the fuse panel which is either under the dash or under the hood in the power distribution center. Connect the test light to a ground like an engine or dash bracket and turn the ignition key to the "on" position. Using the test light probe both sides of the fuse. If the test light illuminates on both sides the fuse is okay continue onto the next step. If one side of the fuse illuminates the fuse has failed and needs to be replaced. If the fuse fails as soon as it is replaced or when you apply the brake pedal the brake light electrical circuit is shorted to ground. Rarely a system short can occur, a car repair manual is needed to find the wiring schematic for the brake light circuit. Once the brake light wiring has been located inspect and repair as needed.

Check Brake Light Bulbs - All cars have three brake light bulbs that create the brake light illumination affect. If all of these brake light bulbs fail no brake light operation will occur. I know what you're thinking, you might say all three brake lights at once? But in reality one brake light went out at a time and you did not notice. People only tend to notice something when they almost run into the back of your car to help persuade them to inform you the brake lights aren't working. Remove any of the brake light bulbs to confirm the bulb is okay or burned. After the bulb has been removed inspect the filament and replace if failed. If the brake light bulbs are okay continue to the next step.

Checking the Brake Light Switch - A control switch is used to connect the brake light electrical circuit. This switch is located near the brake pedal lever. Basic switches have just two wires, power in and power out to the turn signal switch. Use a test light that is grounded and with the key in the "on" position test for power at one side (wire) of the switch, then press the brake pedal while testing the opposite side (wire). It should illuminate the test light, if electrical power is connected through the switch go to the next step. If no power is detected through the switch the brake light switch has failed and replacement is required. If your car is equipped with more than two wires integrated into the brake light switch a car repair manual is needed to locate the proper brake light circuit wiring.

Nov 05, 2011 | 1991 Ford F150

2 Answers

No brake lights, or turn signal lights in the back


Because most the time signals and break lights are on same circuit , most likely it is a fuse that blew. Check fuse panel, and it should be marked brake light or fuse, and pull out fuse, replace with same amp. Let me know if this solved problem. Thanks mike from fixya

Jun 09, 2011 | 2005 Dodge Caravan

1 Answer

Break lights out


I am a liecenced mechanic. Start addressing your problem by checking the brake light fuse in the main fuse panel. See the owners manual for location. Main one is under the hood. Secondary panel is on the passenger side kick panel area or in glove box. Replace the fuse if blown. If fuse is o/k check brake pedle brake light switch adjustment. If switch is adjusted properly, check rear brake light bulbs next. If they are o/k check for power at the bulb socket with a 12 volt test light with brake pedle depressed. Light should light. If it does not replace brake light switch and check operation. If problem is not repaired buy a repair manual or bring to a technition for diagnosis.

Feb 20, 2011 | 1993 Jeep Grand Cherokee

2 Answers

Brake light wont light up when brake pedal is pressed


Sounds like a brake lamp switch or fuse. Check all fuses electrically, with a test probe you can purchase from any auto parts store. Go through each fuse with the probe touching the end or tip of the fuse after clipping the lead on the probe to a good ground. If the probe lights up at both ends of the fuse, the fuse is sound, if it only lights up at one end then replace that fuse and if the probe does not light up at all, that fuse is not active so turn on the ignition but dont start the motor. The brake lamp switch is attached to the brake pedal. It may have a single wire or several. All the switch does is connect the brake lamp circuit to an active supply rail so, The switch should have one active wire and the other wire should become active when the pedal is pressed. If it does not, replace the switch. If it does, then you may have two blown bulbs in the rear lamps or a damaged wiring harness to the rear lamps and you should seek the advice of a qualified person. Start with the fuses, then the switch, then the bulbs..and remember, you may have more then one fuse panel in the vehicle so check under the hood too..

Apr 24, 2010 | 1993 Lincoln Town Car

2 Answers

Brake lights wont work replaced switch checked fuses


Replace bulbs, clean sockets, check towing harness, check brake swich under brake pedal. fuses???
Vitally

Sep 15, 2009 | 2001 Dodge Ram 1500 Truck 2WD

2 Answers

Right brake light out; tail light works fine


most rear tail lights and turn/stop lights are the same dual filiment bulb. it is possible for your tail light to work and your brake light not to and still have a bad bulb. I would check the bulb first, your brake light works on the left yes? this would mean that the fuse is fine

Mar 31, 2009 | 2006 Dodge Stratus

2 Answers

Brake Light Fuse & Gas Gauge


Start by replacing your brake light bulbs. If it still blows the fuse, them your brake pedal switch. If it still happens then you have a shot circuit in your wiring between your fuse panel and your brake lights.

Jul 10, 2008 | 2000 Mercedes-Benz SL-Class

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...