Question about 1996 Chevrolet Cavalier

1 Answer

Hooking up the motor

I need to know how to hook up my 1996 chevy cavalier motor. could you give me a diagram or picture and tell me where everything goes?

Posted by on

  • yadayada
    yadayada May 11, 2010

    No such diagram or picture exists, you will need a full factory service manual and do it system by system, there is no way but the correct way, use the manual.

  • Anonymous Mar 12, 2014

    willnot run

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 123 Answers

Your cavalier is very simple to work on, they are a good engine with simple technology. emissonwiz's explanation is less than poor. I've been working on the 2.2L OHV/2.2L 2200 style and the new 2.2L/2.0L S/C for a long time. I've done no less than 20 headgaskets on the 2.2L pushrod engine and never needed a manual to establish a "system" you simpley put it together the way you took it apart. If you need help with anything specific let me know i'd be more than willing to help you. Do you have the engine back down in the hole connected to the transmisson? It sounds like you bit of a little more than you can chew but thats the best way to learn.

Posted on Sep 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1988 chevy nova 4alc motor need diegram on vac hoses


check with your local library, they should have the Kelly Bluebook diagrams either in paper OR online, which is most fabulous. They can tell you where everything goes!

Oct 04, 2012 | 1986 Chevrolet Chevy

1 Answer

Toyota cavalier 1996 the abs light, how?


Toyota cavalier??? Chevy tacoma???
You might have a wheel sensor issue (part of the wheel bearing assembly) It tell the abs computer the wheel speed, and if one is bad, it will error the abs, and turn the light on. You can get this checked with an abs scanner hooked up, or ohm out all of your speed sensors with a meter.

Jun 23, 2011 | 1996 Chevrolet Cavalier

1 Answer

Trying to find a belt routing diagram for an 96 chevy cavalier with a 2.2 with ac


for the most part there is a diagram under the hood showing you how the belt goes give this website a try www.webcrawler.com and www.alldatadiy.com and www.autozone.com if all fails stop by your local GM-dealership in the parts department and they be able to print you off the pictures and diagrams you will need wish you the best of luck Michigan Man.

Mar 05, 2010 | 1996 Chevrolet Cavalier

1 Answer

Change a serpentine belt on a 1996 chevy cavalier


Diagram should be under the hood
The auto tensioneris down low and dificult to get to.
If it has not been changed in a while you will need a long thin push stick and a serpentine tool.
Push on the belt hard at the auto adjuster and pop the belt off the smooth pully (located top).
hook up the serpentine belt tool and then mount the new belt

Jan 17, 2010 | 1996 Chevrolet Cavalier

1 Answer

How do i hook up a push button start


these things go wrong big time take it back and exchange it for some furry dice or boy racer go faster sticky chrome tape

Dec 01, 2009 | 1996 Chevrolet Cavalier

1 Answer

How to repair heater core for chevy cavalier


I installed a heater core in a 2004 Chevrolet and need to know how to hook up the vent cables (1 goes to the left and 1 goes to the right) for the back of the control knobs. Do they screw in or a are snapped in cant tell.

Nov 24, 2009 | 1992 Chevrolet Cavalier

1 Answer

Wiring harness for 96 cavalier


I have the wiring diagram for this if you give me your email I will send you a picture of how to hook it up.

Aug 09, 2009 | 1996 Chevrolet Cavalier

2 Answers

I am installing an after market stereo deck into a 2004 Chevy Cavalier but I am not getting any power. From my research I need to hook the deck up to the vehicles ignition harness but I do not know where...


ok now this is fun i had a good ole time putting my after market raidio in on my 04 with out the $300 harness that the sterio shops wanna charge a arm and a leg to install you need to run your 12v power source to the igniton fuse its farly simple if you need picture diagrams i can deffianatly post some pictures showing you exactly how to wire it up bc trust me i was mad enuff trying to get my stereo in so i wouldnt mind helping some one else out on getting it installed bc its frustrating not knowing how to do it

Jul 19, 2008 | 2004 Chevrolet Cavalier

Not finding what you are looking for?
1996 Chevrolet Cavalier Logo

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...