Question about 1997 Cadillac Seville

1 Answer

No stop lights on drivers side, 1997 cad. seville. bulbs are good.

Posted by Anonymous on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 232 Answers

After 14 years the bulb socket gos bad from heating up when lite comes on get a new socket and it will work

Posted on Mar 11, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My headlights won't come on


Check your fuses in the fuse box or bad light switch.

Aug 14, 2014 | 1997 Cadillac Seville

1 Answer

1999 cadillac seville wiring diagram


Check wiring with a test light or volt meter. switch lights to low beam, connect volt meter N probe to a good ground then probe the light socket for the low beam power cable, should show battery voltage, now switch to high beam and test for battery voltage if ok remove the grounded meter probe and probe the cable in the socket that you have not tested this is the ground cable, battery voltage should show if ground cable is ok. If no voltage repair cable ,If voltage present check filament on bulb high beam perhaps the new bulb is faulty.

Jul 10, 2014 | 1999 Cadillac Seville

1 Answer

Anti theft system in a 1997 Cad.Seville "Starter disabled" Car has been sitting for a while in humid conditions.


you may have to start from scratch with starting your car. does your radio have to be recoded after the battery dies? if so do not attempt to do this!! remove the positive side of battery terminal for 10 mins. this will reset the cars computer. whan you put the positive cable back onto the battery the car should start, if not, try to boost the car. the car should start. hope this helps and thank you for choosing fixya.com

Nov 11, 2010 | 1997 Cadillac Seville

1 Answer

Replace the license plate light bulb-'99 cad DeVille


Hello,

Please follow the instructions below carefully to change the bulbs in the licence plate of your cad deville;
1.All you have to do is put a flat blade screw driver on the right side of the bulb housing and gently push to the left. This will release the catch holding it in and it will drop out and down on the end of its wiring connector.

2.1/4 turn the bulb and remove. Replace the bulb and just put the housing back into the opening left side first, then just push up on the right side till you hear a click. Takes about 1 min per light. Works for all Deville types from 99-08

Good luck.

Aug 12, 2010 | 1999 Cadillac DeVille

1 Answer

I need directions on how to change a headlight on a 97 cadillac seville


there is a plastic black cover on the front of the engine compartment that has a couple of creases in it where you can lift the cover to reveal the headlight bulbs from behind the lenses. Change the light bulb by rotating the black plastic ring counter clockwise to release the bulb from its socket. Also, pull the electrical connector off the bulb.

Jun 29, 2010 | 1997 Cadillac Seville

1 Answer

Cannot open trunk to 1997 Seville, lost keys.


Typically there are other ways to open the trunk on all vehicles. Some are on the drivers side floor on the left side of the seat, others are on the drivers side door at the bottom and some are in the passager side glove box. Hope you find it!
Good Luck!
PS If you can find it maybe a local locks smith can help!

Sep 17, 2009 | 1997 Cadillac Seville

1 Answer

Fender bender, bought new assembly. How to remove old for replacement? "89 seville driver side headlight.


LIGHTING Headlights REMOVAL & INSTALLATION
  1. Unscrew the Torx retaining screws and remove the headlight bezel.
  2. Remove the headlight bulb retaining screws. These are the screws which hold the retaining ring for the bulb to the front of the car. Do not touch the two headlight aiming screws, at the top and the side of the retaining ring (these screws will have different heads), or the headlight aim will have to be re-adjusted.
  3. Pull the bulb and ring forward, then separate them. Unplug the electrical connector from the rear of the bulb.
  4. Plug the new bulb into the electrical connector. Install the bulb into the retaining ring and then install the ring and the bulb. Install the headlight beze

Aug 23, 2009 | 1989 Cadillac Seville

1 Answer

I need torque spec.on a 1997 cad.seville 4.6 eng.


If you are asking for torque spec for the engine, you are probably doing some serious work.
You should get a Service Manual for your car. You can get on eBay(www.ebay.com). Sometimes the manual will cover several models so contact the seller to make sure your model is included.

Mar 22, 2009 | 1997 Cadillac Seville

Not finding what you are looking for?
1997 Cadillac Seville Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...