Question about 2005 Suzuki Forenza
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Your car is from 2006 how come it needs a timing belt ( do you drive 20K per year? ). What is wrong with the drive belt. The sound from belt is not a clicking noise.
Any way try to avoid that dealer. What a baloney.
When you start the car, open the hood try to identify where the noise comes from.
1-If it comes from the top engine, open your oil cap, to see if oils splattered from mechanical movements. Usually oil is not enough then it takes time to travel to the cam shaft and the lifters that why after making noise a while then the engine becomes quite since it gets lubricated. How long have you been from last oil changed?
2-If it comes from the front engine try to identify if it comes from Power steering or AC. Check Power-steering fluid to see it it needs filled up. Check this before starting the engine.
Try to turn on AC to see if the noise more or less so you can determine the AC clutch is bad.
Hope you can find the source for a good fix.
Posted on Jul 20, 2009
Check if the kill switch is engaged. Check for faulty starter solenoid or disconnected solenoid wire. Check for defective ignition switch. Check for defective starter motor.
Posted on Aug 10, 2009
hi im not sure on this particular model but there a few easy ways to check.... take the spark plugs out, remove the broken belt, shine a light down the holes and look for dammdge, if you cant see anything you can turn the crank but it is a tricky job because you can ruin the engine so if your unsure get a mechanic to do it.. or your other alternative is to remove the head and have a look but you will need a new head gasket kit, timing belt and tensioner kit etc .. it is important that you do not turn the engine over when the belt is disconected in any way UNTIL you know for sure that valves wont hit pistons, even bending a valve will not be very noticable but when its all back together you will deffinately notice and will have to pull it all back apart
Posted on Feb 10, 2010
Testimonial: "Really Fast Reply with very good information. THANKS!!"
SOURCE: HAVEA 2004 SUZUKI FORENZA HAS
CODE P2779 IS TRANSMISSION GEAR SELECTION SWITCH DOWNSHIFT RANGE PERFORMANCE PROBLEM.POSSIBLE CAUSE COULD BE IN THE WIRING OR TRANSMISSION GEAR SELECTION SWITCH FAULTY.
Posted on Sep 03, 2010
Tips for a great answer:
May 23, 2014 | 2004 Suzuki Forenza
Apr 09, 2013 | 2005 Suzuki Forenza
Feb 15, 2013 | Suzuki Forenza Cars & Trucks
Oct 20, 2012 | Suzuki Cars & Trucks
Jun 27, 2012 | Cars & Trucks
Jun 02, 2011 | 1998 Nissan Maxima
Dec 23, 2009 | 1999 Chevrolet C2500
Jun 29, 2008 | 2005 Honda Accord
77 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: