Question about Jeep Cherokee

1 Answer

Need to fix the horn just stopped working one day

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,510 Answers

Check the fuse first. The fuse must be in the main fuse box. The position and function of the fuses is normally marked on the inside of the fuse box cover and also in the owner's handbook. If you don't come right with these, work your way through the fuses looking for a blown one. To ease your search the horn fuse it should be around 30 amps.

Posted on Mar 11, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My horn suddenly stopped working


Check the relay, if you have one, it could be the horn switch too

Mar 29, 2013 | 2003 Mercury Sable

1 Answer

2007 jeep wrangler horn wont work


you will need to remove air bag from steering wheel wire for horn is behind it

Aug 16, 2012 | 2007 Jeep Wrangler 3.8

1 Answer

The horn in my 2003 pontyiac grand am wont stop honking


you will find a fuse labeled HORN and a relay labeled HORN in the under hood fuse flock. Pull either of those to stop the horn from blowing.

If you need info on how to fix it i can help. You will need a test light or a voltmeter.

You can also try swapping the horn relay with another relay in the fuse block that is the same. If the horn works normally than the relay is bad and will need to be replaced.

Feb 14, 2012 | 2003 Pontiac Grand Am

1 Answer

How to fix the horn. or rewire a horn. the previous owner stated that he took out the fuse for the horn because it would not stop beeping . I need the horn to work to pass safety


Hi,
Apparently the previous circuit of horn is shorted making work all time.
Just check entire wires, relay and horn button in your car for shorted and have them fixed.
Otherwise you need to install new set of horn system ( horn button, wires and relay)

Dec 20, 2010 | 1989 Volkswagen Cabriolet

2 Answers

Cannot get horn to make any noise? Fuses are OK. Truck sat over the winter months.Went to use horn and nothing. Does steering wheel pad come off. What should I do? 2005 Nissan Frontier 4x4 truck ...


Could possibly be a corroded wire, loose wire, bad ground. Not necessarily the wires going to it, but the accessory wire it is attached to. My horn worked when my vehicle was sold to me, then one day it stopped working. Never did anything about it, then 4 years later my power window stopped working. I spent 8 hours tracing out the wire and I found a corroded ground wire where it goes out to the door switch. I tested the power window and it worked and pressed the horn button..it worked too. Give it a try. Or you might just have a bad horn, try to tap it. It might work.

Jul 23, 2010 | 2005 Nissan Frontier

2 Answers

Can i pull a certain fuse to stop my horn from honking?'95 accord


hey, im not sure what your car is like but if you do not have an airbag steering wheel then you can just pull the horn pad straight off and replace it... see if that works but remember its illegal to not have a horn technicaly so its best to fix it quick

Feb 11, 2010 | 1994 Chevrolet Cavalier

2 Answers

Horn stopped working, fuse and relay is good


With test light check voltage at horn assembly on both wire's, could only have one, horn assembly itself could be ground, have some one press horn button while checking, if there is voltage replace horn assembly, if no voltage horn pad at streeing wheel bad. that's being fuse and replay are good.

Jan 04, 2010 | 2007 Pontiac Solstice Convertible

1 Answer

MY HORN DOESNT WORK


First thing to check are the fuses for horn and lights

Dec 10, 2008 | 2005 Chevrolet Malibu Maxx

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...