Question about 1990 Ford Mustang

1 Answer

My turn signels aren't working. i put a new switch in it plus put a new flash in the fuse is fine to my hazared lights work fine

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I found my problem. check behind your radio. there is another flasher there and i exchanged with fuse panel flasher that was really a hazard flasher and switched out. working great now.
enyaw

Posted on Aug 02, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

97 Nissan Pathfinder dash lights aren't working AND the alarm to turn off the headlights isn't working either.


i know this sounds crazy, but do you have break/tail lights?some cars shut off dash lites when tail/brake lights dont work

Jan 11, 2013 | 1997 Nissan Pathfinder

1 Answer

Doger charger horn trun signel wiper quit working 2008 6cel


All of these functions are controlled by the totally integrated power module (TIPM) so the first thing to do is check 30A fuse 10. Next, check 10A fuse 30 in the power distribution center (PDC). Power passes through the steering control module and the right steering switch to the horn switch. Pressing the horn switch sends a signal through the right steering switch and the steering control module to the TIPM which applies 12 volts to the horns, causing them to blow. If all fuses check good, the problem is in the other circuitry.

If fuse 10 in the TIPM is good, operation of the turn signal switch should cause the turn signals to flash.

If fuse 10 in the TIPM is good, check 5A fuse 35 and 10A fuse 30 in the PDC. If all fuses are good, the wipers should work.

Sep 11, 2012 | Dodge Cars & Trucks

2 Answers

I have a 1966 Buick Skylark and none of the tail lights or headlights work, when you turn them on, the fuses are good and the bulbs are good, anybody have any other ideas of what it can be


Well the first thing I would do is check to see if the headlight switch is getting power from the battery-starter. The switch has a circuit breaker built-in for the headlights, and the tail lights are on a fuse in the box under the dash.

Aug 17, 2012 | 1995 Buick Skylark

1 Answer

I have a 1994 cutlass supreme and both the turn signals are flashing when they are engaged. We replaced the turn signal flasher underneath the dash, thinking that it might help and it did not. We also had...


Stop replacing things and turn off your hazard lights. If this doesn't fix you may have to replace your steering column turn signal switch. Youer hazard lights aren't working likely to a blown fuse.

Jun 16, 2011 | Oldsmobile Cutlass Supreme Cars & Trucks

1 Answer

2006 Toyota Sienna Taillight will not work I had remote start installed and when you remote start the tail light and parking light will flash indicating car is remote started. Problem: When I put the key...


Bypass the fuse? Bypassing a fuse is a fire hazard in the first place. When they worked on that everything should work normally plus the added feature. Not compromising anything. Take it back there and have it done properly or put it back the way it was, and have it done somewhere else. You work hard for your money so you deserve a good job on your car.

Nov 14, 2009 | 2008 Toyota Sienna

1 Answer

I have a 2003 pontic grand am i dont know why the interor lights, dash lights, and tail lights, aren t working at all! break lights work. right turn light works, left turn light clicks like 4 times faster...


The headlight switch is common to all your problems except the quick flash of the turn lights on one side the quick flash is usally a bad bulb as the tailights have two and one could be out and it'll still work just it changes the flash quicker with no load too little and it'll not blink just stay on. Theres fuses for the dash lights but the tailight fuse has to be good for it to get power. Any crash damaged lights need to be checked out as water getting into the sockets can mke a problem. The marker lights on the front do'nt work either. Fuse or headlight switch now remember that the radio has a light in it too and if someones changed the radio alot of aftermarkey readios don't use the run light as they are on withthe radio on and this wire may be touchin ground or be hooked up wrong at the lights the wire color is brown. It's highly unlikly that alot of bulbs failed at one but the car is old. Start with fuses and if the tail fuse is blown and it has an odd radio pull it disconnect it and try another fuse

Aug 28, 2009 | 1996 Pontiac Grand Am

1 Answer

Turn signal


check to see if the bulb is good and if it is replace the flasher located under the dash.

Oct 26, 2008 | 1991 Cadillac DeVille

1 Answer

1998 Honda Accord EX


  1. check if the turn signels work. check the brake petal switch underneath the brake petal-also check the operation of the emergency flashers for operation. all of these items are related.

Aug 31, 2008 | 1998 Honda Accord

Not finding what you are looking for?
1990 Ford Mustang Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...