Question about Chevrolet Astro

2 Answers

Vehicle will not start fuel presure is with in limits has spark usuely wont start after driving around and the vehicle is worm

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 83 Answers

It sounds like the ignition is shorting out after it gets hot. What type of vehicle is this?

Posted on Mar 11, 2011

  • othpabatan Mar 11, 2011

    1997 chevy astro van

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 76 Answers

You may have what they call a hot soak problem, as electrical parts heat up it can cause and electrical open in the circuit . Most of the time we find the after a drive and car sets the under hood temp raises and cause such a problem . Now for your car i would look to see if it has injector pulse . you may have spark and fuel but with out and injector signal it won't start. i would suspect that your problem is related to and ignition module problem when the car heats up .

Posted on Mar 11, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2001 ford crown victoria shut off while driving an wont start again.


What tests have you run? Any spark at plugs? Timing belt broken? Fuel presure correct?

Mar 20, 2015 | Ford Cars & Trucks

2 Answers

New battery, new alternator, still wont start


    • 1 Ensure that your battery cables are properly connected to the battery.
    • 2 Start your car.
    • 3 Let the car run for around half an hour. Most cars idle fast enough that the alternator will be able to charge a battery while sitting at idle.
    • 4 Turn off your engine and test your electrical systems. If they work properly, your battery has been charged. If they do not work, or are sporadic, turn your car back on and drive around for another half hour. After the drive, your car's battery should be sufficiently charged.

Sep 24, 2011 | 1999 Chevrolet Monte Carlo

1 Answer

WHAT DOES EML LIGHT MEAN ON THE DASH OF MY 2003 BMW 325I?


The "EML" warning light in a BMW indicates a problem with the "drive by wire" throttle control system."

"EML" is an acronym for "Elektronische Motorleistungsregelung". Loosely translated from the original German for the BMW owner means Electrionic Engine Power Control.

"EML" is BMW's system name for electronic throttle management. The "EML" system, in it's most basic sense consists of an accelerator pedal (with an electronic position sensor), a computer module (usu. integrated with the main engine computer), and an EDK (Elektronische Drosselklappe or Electronic throttle valve). The EDK is also known as a "drive by wire" throttle. "EDK" throttles use a computer controlled stepper motor rather than a purely mechanical linkage (usu. metal cable attached directly to the accelerator pedal) to control the opening and closing of the throttle plate.

"Drive by wire" throttles are very common on modern vehicles starting in the late nineties up through the present day. "Drive by wire" technology enables very precise throttle control to improve drivability and vehicle emissions, as well as many convenience features like electronic cruise control, traction control & stability control.

BMW first implemented "drive by wire" in very limited quantities on the most expensive & sophistocated BMW models starting in 1988.

The latest generation of advanced vehicle features to take advandage of "drive by wire" technology are radar guided cruise control, accident avoidance control, autonomous-driving, and autonomous-parking systems.


Read more: http://wiki.answers.com/Q/What_does_eml_warning_light_on_a_bmw_mean#ixzz1OnBNssKH

Jun 09, 2011 | 2003 BMW 325

2 Answers

Turns over but will not start. It has gas in it.


first off you need to make sure they fuel is getting presure at the fuel rail, look for the shrader valve, it looks like the air stem on your tire, turn the key on and off a few times with out trying to start it this will give you an idea if there is fuel presure in the lines, this is not a fuel presure test and your presure could be low and causing the no start, also get a spark tester and put in on each spark plug wire and make sure you have spark also, if you are laking any of the above you should test accordingly

Mar 01, 2010 | 1998 Ford Explorer

1 Answer

My 1996 ford f150 with the in-line 6 cylinder was just rebuilt from the head up and all new injecters were installed. sometimes after driving for a while and after turning the engine off the vehicle will...


get a fuel presure gadge and check the presure after setting hook up the gadge starty it up let it set see if the presure drops to 0 if so and you have no fuel leaks and you know that none of the injectors are leaking then it might be the fuel pressure regolator or the fuel pump the psi should be around 35 40 psi i think

Dec 29, 2009 | 1996 Ford F150 Regular Cab

1 Answer

2004 tahoe. Worked fine two days ago. Wont start but turns over. replaced fuel filter,now what?


check for spark and fuel at the motor! take one of the spark plug wires off and remove the spark plug and put the wire back on it and rest the spark plug on a negitive ground point and have someone try to start it and see if the is spark. to check to see if fuel is getting up there locate the fuel presure relief valve on the fuel rail that the injectors are connected to and while someone it trying to start it depress the valve and see if fuel squirt out.

Sep 16, 2009 | 2004 Chevrolet Tahoe

1 Answer

92 buick lesaber wont start all fuses are good


check for fuel presure at the port on fuel rail on top of engine.could be pump.

Jun 05, 2009 | 1992 Buick LeSabre

1 Answer

1987 ford f150 8yl turns over wont start


check your spark plugs are not wet with fuel if they are fit new ones
if they are not wet put fuel down the intake and try and start if it starts u have a fuel problem

Dec 16, 2008 | 1987 Ford F 150

2 Answers

93-gmc c-1500 pick-up


I need to know , do you frequently run the fuel level to below 1/8 of a tank?
Has it been giving you any signs?
We need to know if there is fuel presure
Is there Spark at all 8
has it been in heavy driving through puddles

Aug 27, 2008 | 1993 GMC Sierra K1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...