Question about 2002 Mini Cooper

1 Answer

Ait bag warning light on, plus passenger seat doesnt fold forward correctly and difficult to get back in the correct position after letting passengers into the rear. 2002 cooper. thanks

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 27 Answers

Regarding the passenger seat, to allow someone into the back seat, push the seat back lever DOWN. This will flip the back of the seat forward and allow the seat to slide forward. Simply push firmly on the seat back (no need to touch the lever) and it will return to its original position.

If you pull the seat back lever UP, you can adjust the recline angle of the seat back. Pulling the lever UP will also let you fold the seat and slide it forward, however, it will not return to its original position.

Sorry, cannot solve your airbag question.

Posted on Mar 20, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Service Air Bag light on


DTC B0058 Right Front/Passenger Pretensioner Deployment Loop Open.
The passenger seat belt pretensioner deployment loop consists of a seat belt pretensioner-RF and the seat belt pretensioner-RF high and low circuits. A shorting bar used within the seat belt pretensioner connector shorts together both the seat belt pretensioner high and low circuits when the connector is disconnected. This will help to prevent unwanted deployment of the pretensioner during servicing. During a frontal crash of sufficient force the inflatable restraint sensing and diagnostic module (SDM) will allow current to flow through the deployment loop in order to deploy the seat belt pretensioner. The SDM performs continuous diagnostic tests on the deployment loops to check for proper circuit continuity and for shorts to ground or voltage. If a malfunction is detected, a diagnostic trouble code (DTC) will be stored in memory.
DTC B0084 Left Front/Driver Seat Position Sensor Circuit
The inflatable restraint seat position sensor (SPS) is used to determine the proximity of a front driver or passenger seat position with respect to the frontal air bag. The SPS interfaces with the sensing and diagnostic module (SDM). The state of the SPS allows the SDM to disable stage 2 of the frontal air bag for a front seat that is forward of a forward/rearward point in seat track travel. The SPS is a hall effect sensor that is mounted on the inside seat track of both the driver and passenger seats. The seat track includes a metal bracket that shunts the SPS magnetic circuit creating 2 states of seat position. The shunted state represents a rearward seat position. The non-shunted state represents a forward position. The SPS provides 2 current ranges, one range for the shunted state and a second range for a non-shunted state. These 2 states are inputs to the SDM. State 1 (shunted) being the rearward threshold and state 2 (non-shunted) being the forward threshold. When the SDM receives input from a SPS that state 1 threshold is reached (seat is rearward) the SDM will not disable stage 2 deployment, if required by the deployment sensors. When state 2 threshold is reached (seat is forward) the SDM will disable stage 2 deployment on the side the seat is forward. The SDM monitors the SPS circuit and if a fault is detected the SDM will set codes B0083 or B0084 and defaults to disabling stage 2 frontal deployment. This will only default on the side of the vehicle the sensor has a fault. Its important to understand that the SPS is secondary to the passenger presence system (PPS) and the manual instrument panel (I/P) module disable switch. If either one of these devices are in the disable mode the passenger air bag will not deploy regardless of the SPS status.
You should take this to a qualified repair Shop ! Takes special tools to test .

Feb 26, 2016 | 2006 GMC Envoy

1 Answer

How do i adjust the paasenger seat in my 1999 VW beetle?


There is a D shaped handle on the side of the seat nearest the door. Lift up on it and the seat back will fold forward, and the entire seat mechanism will lift up and to the front, giving your passengers room to get into the back seat. Simply push the seat back toward the rear of the car to set it back in place; it will lock itself down once it's back in its original position.

May 16, 2014 | 1999 Volkswagen Beetle

1 Answer

I have a 2005 caravan that the seat belt warning light and chime will not turn off even when the belts are buckeled..additionally the passenger air bag off light is illuminated even when there is someone...


Pull the fuse it won't affect the seatbelts from working correctly. otherwise you have to disconnect each seatbelt lock to find the defaulted lock. As for the airbag light; do you have the type that can be turned off with a key? It may be permanently turn off and needs to be turned back on with the key.

Oct 06, 2013 | 2004 Dodge Ram 1500

1 Answer

Chack airback


air bag light on posible causes
car been in accident and air bags activated and replaced without resetting air bag modual.
bad conection or broken wire under front seats theres conectors for seat belt tensioners all linked to air bag warning light have a look under your drivers and passengers seat make sure they aint pulled when the seats moved back n forth

Apr 09, 2013 | 2007 Renault Scenic 1.6

1 Answer

On my extended cab, the front passenger seat will not slide all the way back to the lock position


There's probably something in the way. Get under and behind the seat with a flashlight and check the back end of the rails to see if something is there.

Jul 09, 2017 | 1993 GMC Sierra

1 Answer

2006 Ford Explorer: Back seat won't fold flat to create flat cargo area. It folds down but not flush.


Okay so im just going to start from the seat being upright in a normal riding position.

1. You need to fold the head rests first. Pull the black tab under both headrests. They should spring into a folded position.

2. pull the side seat lever (on the door side of the seat). This will fold the top/back support down to an angle.

3. There is one more lever on the backside of this seat. Its in plain sight on the angled portion of your seat. Lift the big plastic lever.

4. While keeping the handle lifted, grasp the back of the seat and pull it torwards the front of the car. The seat should come unlocked and roll forward and down more towards the floor. If you have a bunch of junk on the floor, it obviously wont work. clear the path and the seat will fold completely flat.

Also, your drivers seat and front passenger seat cannot be all the way back, they need to come forward some in order for the second row seats' head rests to clear and fold flat.

Oct 02, 2010 | 2006 Ford Explorer

1 Answer

Driver's seat back will not go back to correct position. Electrical is still functioning, but the part of the seat that bends forward to allow passengers to get in back of van will not go back to upright...


Some Times The Motor Gets Jammed And Require Pressure From Your Legs Just Press Back on the seat while holding switch in the back direction if motor began working spray silicone and white lithium grease on the gearing and tracks under seat. hope this helps.....

Jun 24, 2010 | 1998 Ford Windstar

1 Answer

A4 convertible drivers seat.


I have had the exact same problem , the actaual cause of the seat not sliding back is due to the small cable retaing clip which fastens at the underneath of the seat this is a very common problem and is very trickY to get to as you say the rear panel appers to need to come off , it does not, you axs the small clip from removeing the liners at the very bottom of the seat where there is a footwell light , when you axs this area you be able to get to the clip or the actaul cable ,to which ever is broken,,

Apr 27, 2009 | 2005 Audi A4

1 Answer

Xantia side air bag warning light


I have had the same problem on my Xantia SX saloon moder 2000 for the past one month. Today I could solve the problem after I checked all the connectors under both the driver's and the passenger's seats. I assume that one of the connectors were somewhat loosened. You can easily reach those connectors after you move the seats backward.

Regards,

Mar 16, 2009 | 2005 Peugeot 405

1 Answer

Passenger Air Bag Warning light stays son


is this van new for you ? is it a status light letting you know that the airbag is loaded and ready for anypassenger that you have in your van ? do you have a key that you can turn it off in most vans there is an option to turn air bag on or off depending on size or opinion of passenger . im thinking that if its a status light its okay to be on letting you know its ready for opperation . take a look at your owners manual airbag section . and if it does turn out to be a warning malfunction indicator please dont waste time take it to your local dealer and have it checked out .hope this information helps good luck

Jul 03, 2008 | 2006 Chevrolet Uplander

Not finding what you are looking for?
2002 Mini Cooper Logo

518 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mini Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76673 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Mini Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...