Question about 1994 Ford Ranger Supercab

1 Answer

How do you replace ball joints on 1994 ford ranger 4x4? Want a diagram please!!!

Posted by on

1 Answer

Look on You Tube,you will find anything you
want on Video from repair shops

Posted on Mar 11, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can I just change the upper ball joint on 2001 Mazda b2300


Old, Some times the hole control arm assembly is changed, if you can find it priced reasonably other wise yes, with proper tools the ball joint can be changed. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
How to Replace Ball Joints on Ford Ranger
Replacing Ford ranger ball joints
2003 Ford Ranger Ball joint and Control Arm Repair Part 1 Lower Ball Joint
Mazda B2300 Ball Joints eBay


May 19, 2016 | Mazda Cars & Trucks

1 Answer

Hi, i have a ford ranger 1992 4x4. i want to replace the 4 ball joint. i take off everything. i just wonder and can i take off both solid axle shaft so i can take off the ball joint


The steering knuckle has to be removed so you can use a ball-joint press to remove and install the ball joints. The drive axles must be removed so there will be enough room to get the steering knuckle to drop down far enough so it can be removed.

Sep 11, 2011 | 1992 Ford Ranger

1 Answer

How to remove upper and lower ball joins on a 4x4 bronco full size 1986


For Lower & Upper Ball Joint Step by Step :

For That you use a C-clamp style ball joint press to remove the ball joint from the suspension arm-note the location of the receiver cup ! For installation of the ball-joint, use the same tool when pressing the ball joint into the suspension arm-again, note the location of the receiver cup.

Step by Step :

  1. Raise and support the vehicle safely, with jackstands.
  2. Remove the spindle and the ball joint assembly from the vehicle.
  3. Remove the snapring from the ball joint. Using a ball joint removal tool, remove the ball joint from the spindle. Do not heat the ball joint or the axle to aid in removal.
  4. Installation is the reverse of the removal procedure. Torque the ball joint stud nut to 85-110 ft. lbs. for 1983-89 Ranger and Bronco II.

    Please Rate, Thank you !

Aug 13, 2010 | 1994 Ford Bronco

1 Answer

Need to replace upper left ball joint on a 2001 ford ranger, xlt, 4x4 v6 4.0 liter


You will need to replace the control arm with the ball joint since it is not sold separately. If one is found it will be a foreign made piece of junk and not worth using. They are weak and break

Jun 23, 2010 | 2001 Ford Ranger Regular Cab

1 Answer

Are 1994 s10 upper and lower ball joints pressed in


the upper ball joints are rivited or bolted if yhey have been replaced before
the lower ball joints on a 2WD are pressed in
the lower ball joints on a 4X4 are rivited or bolted

Jun 04, 2009 | 1994 Chevrolet S-10 Blazer

1 Answer

1998 Ford Ranger 4x4 How do you replace the ball joints


rent a ball joint tool from your local auto store,
they can be rough to install.

Mar 31, 2009 | 1998 Ford Ranger SuperCab

1 Answer

REPLACING LOWER BALL JOINTS ON 2000 FORD F250 4X4 7.3L DIESEL


hello,yes you do have to take the hub off to replace the ball joint with the ball joint being on the back side of the hub. hope this helps and please rate this.

Mar 15, 2009 | 2000 Ford F250 Super Duty Crew Cabs

1 Answer

Upper and lower ball joints bad on 2000 ranger xlt sport.


If the ball joints are held in with rivits you will need to cut them out. The easiest way is to use an air chisel. Then you need only to knock them (ball joints) out of their hole in the "A" frame. Then you will just reverse the procedure to install the new ball joints. The replacement joints will just be bolt in to place. Pretty straight forward and easy. Just a little labor intense sometimes. You can do it. Good luck.

Mar 09, 2009 | 2000 Ford Ranger SuperCab

Not finding what you are looking for?
1994 Ford Ranger Supercab Logo

458 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...