Question about Chevrolet Chevy

3 Answers

New front brake pads installed. Brake pedal pressure feels fine but will occasionally drop and ABS will engage.

Posted by on

  • Anonymous Mar 22, 2014

    New brakes front rear , e brake has to go to rear seat before engaging. Pedal has to travel to far brakes are hard once you get there work great. Just don't like the travel been like this since new dealer said its normal? Don't think so

  • Anonymous Mar 26, 2014

    brake pedal feels fine

×

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 2,039 Answers

You have to see if a sensor for abs was not damaged while the brake pad was change check that out if you dont see a crack or broken check the wire that go on the front table the wire crack and does our symtom hope it a fixya

Posted on Jul 31, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chevrolet Master
  • 70,387 Answers

You may have air in the brake system, bleed all 4 wheels in this order: RR,LR,LF,RF, check the brake fluid often when bleeding, do not let the master cylinder run out of fluid, if this doesn't cure the issue then your master cylinder maybe going out.

Posted on Jul 31, 2008

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Another counterintuitive possibility is poor quality brake pads. Most popular companies make pure junk.

Posted on Jul 31, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brakes juddering, not rear drums front discs appear good.


no
the problem most likely is warped discs
this makes the pistons move in and out and pulses under the foot
take the discs to an accredited brake shop and have them checked and machined
ABS systems do not work until a skid situation is reached, then the abs pump cuts in and maintains brake line pressure according to brake pedal pressure
oil on brake lining and disc pads will also give problems so have the shop do a proper inspection

Aug 15, 2016 | Cars & Trucks

1 Answer

2005 Chevy impala brake pedal pulsation with brand new rotors installed


Is your ABS working properly? Under heavy braking the ABS should engage and 'pulse' the brakes on/off. It is normal to feel the brake petal flutter or pulse under your foot.

Under light braking there should be no pulsing as the ABS does not engage and you have changed the rotors and pads.

Nov 19, 2013 | 2005 Chevrolet Impala

1 Answer

2007 GMC Canyon ABS Fault - Originally ABS Fault started when making a sharp right turn. (ABS Fault light only). Stopping and restarting would clear 'fault' until next hard right. Later, occasional metal...


id check your caliper to see if the piston is compressing all the way if not check your fluid it should be clean not brown or if you have been through large amounts of water if it has gotten into the brake system and check your bleeder valve to check if it has rotted or come lose or if you have a break in the lines or air, most likely your caliper is failing to compress.

Nov 05, 2013 | 2007 GMC Canyon Crew

2 Answers

My abs light comes on occasionally. everything seems fine, then some times I can't stop as well as I should. It seems that the abs is kicking in & it makes ticking noises in brake pedal area. It also...


There's a service bulliten about that problem with rust build-up on the front hubs pushing the sensors out of posistion [ most common on the pickups in areas that use road salt ], it happens mostly at very low speed. The best way to find out the problem is to have the system scanned.

Mar 17, 2011 | Chevrolet Aveo Cars & Trucks

3 Answers

2007 camry brakes vibrating


Installing new brake pads on toyota camry solara 2006 front rotors and pads and rear pads. Steering wheel would shake while breaking on 50+ miles per hour speeds. All fixed now.

Jun 22, 2010 | 2007 Toyota Camry

2 Answers

Intermittent braking problem


yeah you mostlikey have a abs pressure switch problem. which helps in the power assist , and or the seal in the brake booster is going bad

May 27, 2009 | 2003 Mazda Tribute

2 Answers

Changed front brake pads. brake pedal goes to floor. no brakes


Something doesn't sound right, you shouldn't have to remove the brake line to install pads. Did you have to do this on both sides? Do the new pads and the old pads look the same? Did you get the caliper on crooked? Just recheck your work first before replacing more parts. When you install the caliper, You have to hook the pad on one side first before you slide it over the rotor.

Mar 26, 2009 | 2000 Jeep Grand Cherokee

4 Answers

1998 ford windstar brakes


sounds like you are getting a false ABS activation. Check the axles at the outer cv joints to see if the sensor rings for the ABS are cracked. A common problem.

Dec 17, 2008 | 1998 Ford Windstar

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

355 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6880 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...