Question about Fiat 500

Open Question

I need 2 remove door handle on my 2002 fiat stilo dynamic how do u do it

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 74945 Answers

SOURCE: where do i find manafacturers fault codes for a

Trouble code P1121 means: Throttle Position Sensor A Inconsistent With MAF/MAP Sensor

P1687 Metering Oil Pump Stepping Motor Circuit Malfunction

Posted on Sep 01, 2009

  • 112 Answers

SOURCE: 2002 Nissan Altima Exterior Door Handle

Look at the inside of the door directly behind the door handle. There should be a hole about 15 mm wide.
Just enough to get a small socket through.
Make sure the window is up.

Posted on Feb 03, 2009

MNfisherman
  • 11896 Answers

SOURCE: 2002 Silverado outside Door Handle

yes. you should remove the inside door panel.

to do this, remove all the screws you can see. One in the door handle, one by the mirror, then remove window crank/buttons

the take a flathead screwdriver and CAREFULLY pry the panel off. it is best to pry where the plastic pins are holding the panel on.

reverse procedure to reinstall.

Posted on Apr 01, 2009

  • 1 Answer

SOURCE: 2002 Nissan Altima Exterior Door Handle

I seriously doubt that supergluing or even epoxying a handle back will hold at all, or hold for more then few days.
I would only suggest doing the replacement yourself if you familiar with this type of work, or has the aptitude to figure out how to do it, and have the right tools because it is NOT trivial and a number of things can be done wrong, broken or scratched.
The handle itself cannot be replaced. The outside door handle assembly (which includes the handle, the bezel with all associated springs, plastic and metal hardware) has to be replaced. Besides junkyards, which is a long shot for number of reasons, the only place where the handle assembly can be bought is the dealer. And these handle assemblies are not cheap ether. The driver side handle on my 2002 Altima broke first. I paid $60.23+tax, and they had to order it. BEFORE anyone goes to the dealer I suggest to call first, and ask them if they have it in stock. Since door handles are sold painted they will ask you for your car's VIN number so that they match the paint color.
After you pick it up, the replacement will take about an hour (if you know what you doing). The inside door panel has to be removed, it is held in place by the inside door handle and the panel is attached by a number of clips, the handle assembly is attached to the door by three bolts, to remove which you will need a socket with extension. You will also need a good flashlight so you see what you are doing.
If you are familiar how to do this type of work and plan to keep the car for a while I strongly suggest buying a factory service manual on a CD (I bought mine on eBay for under $10). It is worth its price 1000s of times over, and makes almost ALL repair work SOOO much easier.751424a.jpg73e3811.jpgd240851.jpg

Posted on Nov 16, 2009

  • 1 Answer

SOURCE: fiat stilo 1.2 16v 2004, revs keep hanging between

Please fix my fire fox

Posted on Jan 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the best way to remove the water pump?


To remove the water pump of Fiat Punto/Stilo:
1 Disconnect the battery negative terminal.
2 Drain the cooling system.
3 Remove the timing belt.
4 Unscrew the retaining nut and the three bolts and withdraw the coolant pump (see illustration). If the pump is stuck, tap it gently? using a soft-faced mallet - do not lever between the pump and cylinder block mating faces of Fiat Punto (Stilo). best-way-remove-water-pump-x4hf4jmz40to2ykgevxwzmql-3-0.jpg

Source: Coolant pump removal inspection and refitting FIAT Punto

Sep 27, 2014 | 2006 Fiat Stilo 1.6

1 Answer

What is the fuse box diagram for 2003 fiat stilo 1.6


On this website, you find fuse box diagram and description for Fiat Stilo (2001 - 2008)

Fiat Stilo 2001 2008 fuse box diagram Auto Genius

Nov 12, 2013 | Fiat Stilo Cars & Trucks

1 Answer

Fiat stilo 2002 1.2 which cigratte lighter use


unless you have something special cigarette lighters are the same. Check the removable section with another from somewhere else and if they are the same the you can get lighters fro good auto spares shops.

Nov 13, 2013 | 2002 Fiat Stilo

1 Answer

Air bag warning light keeps coming on


There are cables for the Airbag's under each front seat. Disconnect the battery from the car (It's safer, because messing with the cables while battery is connected could deploy airbags and cause a hefty repair bill). The connector/ cables under the seats like to get loose if you move your seats around a lot or if you got the 3-door Version. Get some electrical contact cleaner and clean the connectors and it cables. and assure that they are connected properly. When you connect the battery back on the error should be cleared. If the airbag light comes bag on, check the connector inside the roof of the glovebox, that one likes to get loose as well. It should be a orange or blue connector if I remember correctly.
Best of luck,
Maria

Feb 24, 2013 | 2002 Fiat Stilo

1 Answer

Fiat stilo cd changer code (cdc m code


You must contact the Fiat dealer for this unique code.

Mar 07, 2012 | 2002 Fiat Stilo

1 Answer

How to change a n/s headlamp bulb fiat stilo


download.fiat-bg.org/Books/Stilo/Stilo_Changing_Headlight_Bulbs_without_removing_bumper.pdf

Jan 24, 2012 | Cars & Trucks

1 Answer

MY Fiat stilo windshield wippers front and back


try changing the wiper relay in the fues box, it might be u/s and sending wrong signal to motors hope this helps

Feb 08, 2010 | Fiat Strada Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

377 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fiat Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

74945 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Fiat Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...