Question about Renault R18

1 Answer

My renault master will not start it fires for about 2 seconds but will not run it was running fine when i stopped it went to start it next day and would not start

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,386 Answers

Hi and welcome to FixYa!

As a first course of action please check if you have fuel flow. Try to turn on the ignition but don't crank it. While turned on, remove the bolt on the fuel rail and observe if there will be fuel flow. If there's none, replace the fuel pump. If there is, no need for replacement.

Be sure that the battery and starter is in good condition for if one of them is faulty, there won't be enough power to kick the flywheel. Make sure that you have a good spark too. If there's no spark on the plug wires then you will need to replace the coil pack for if the coil pack is faulty it tends not to give current to the plugs.

Hope this helps and thank you for using FixYa! Have a good one!

Posted on Mar 11, 2011

  • gkbtspt Mar 12, 2011

    My Renault Master has a diesel 2.4ltr motor.

  • afarri
    afarri Mar 12, 2011

    Thanks for the added information. It can be a bad fuel pump and please do replace the glow plugs. If the glow plugs are not working the engine will not heat up before start up. One good reason why it won't start.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Renault trafic wont start...engine warning light flashing


The light and the word stop should be sending you a clear message . The engine hard starting and sluggish is also sending a message and if you do not heed the message and have the fault codes read and the problem fixed then the next message may be replace the engine or gear box . The light is there --not to be an annoyance ---but to inform you that something drastic is going wrong and it needs urgent attention.

Mar 09, 2014 | Renault Cars & Trucks

1 Answer

Bypass imobalizer on renault kangoo 1.5dci 2003


my kanggo burned 2 months ago at 1,30 p.m. ; tha car was parked outside my house and was stopped sonce 5 hours before. The firemen that estiguished the fire reported taht was an autoself fire provocated from a short circuit in the elctrical connection.Please let me know if somebody knows about otehr inconveninet like mine.Thanks

May 30, 2012 | 2003 Renault Kangoo

1 Answer

Megan coupe petrol 2001. the car went sluggish missing a bit as if plug was down. plus could smell engine. got it home . next day it started ok . after that wont start now. turns over but wont fire in. can...


Could be a whole gambit of problems

1) Check the HT system is good, contacts clean, good spark on the plugs.
2) Check the water temperature sensor.
3) Check the air filter isn't clogged.


Finally, here's a pretty good Renault forum, the solution could be here:-

http://www.renaultforums.co.uk/

Apr 18, 2011 | 2000 Renault 181

3 Answers

Car won't start not the battery


Test the neutral safety switch but doing the following steps.

1)foot on brake
2)turn key to on position
3)shift lever to neutral (N)
4)start the engine
5)shift the lever to Park (P)

If the engine can start at N and not at park then it's the neutral safety switch.


Dec 01, 2009 | 1999 Ford Taurus

1 Answer

1993 Jeep Grand Cherokee engine problem


If the crank sensor (reaR at bellhousing) is dirty, will not start, clean up and visually inspect

Apr 27, 2009 | 1993 Jeep Grand Cherokee

1 Answer

1993 Jeep Grand Cherokee engine problems


First run a code check, see what you find. Second, you can do individual component testing with a decent volt/ohmeter to pinpoint problem. (instructions for tests in any decent manual)
Just off-hand, most common failure with similar symptoms to yours is crank position sensor.

Apr 27, 2009 | 1993 Jeep Grand Cherokee

1 Answer

93 Jeep Grand Cherokee Won't start


The crankshaft position sensor was seriously problematic in those old jeeps. It's located towards the top of the bell housing slightly to the driver's side I think.

Apr 15, 2009 | 1994 Jeep Grand Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

238 people viewed this question

Ask a Question

Usually answered in minutes!

Top Renault Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

xxxxxx xxx

Level 3 Expert

4848 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Are you a Renault Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...