Question about 2007 Mazda B2300

1 Answer

I need to find the thermostat location in a mazda '96 B2300 SE

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Mazda Master
  • 486 Answers

THE THERMASTAT WILL BE LOCATED AT THE ENGINE SIDE OF THE RADIATOR HOSE! ON THE ENGINE, YOU WILL SEE TWO BOLTS HOLDING THE INLET ON THE ENGINE! DRAIN THE RADIATOR, AND REMOVE THE HOSE FROM THE ENGINE INLET! UNBOLT THE INLET, AND YOU WILL SEE THE THERMASTAT, REPLACE IT IN THE SAME WAY THE OLD ONE COMES OUT, (USUALLY THE SPRING SIDE WILL GO IN TOWARD ENGINE)! THEN PLACE THE NEW GASKET ON THE INLET, AND REBOLT IT TO THE ENGINE! REPLACE THE HOSE, TIGHTEN IT DOWN, ADD ANTIFREEZE TILL FULL, START ENGINE, AND CHECK FOR LEAKS! YOU CAN REMOVE THE RADIATOR CAP AND WATCH THE COOLANT, AS THE THERMASTAT OPENS, THE COOLANT WILL START MOVING! REPLACE THE CAP,

Posted on Mar 11, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace thermostat in 1996 mazda B2300


Follow the top hose from the radiator to the top of the engine. That point is where the Thermostat is located. Make sure the car is fully cooled. Remove the hose at the engine and catch the antifreeze that dumps out. You cant dump that down the drain. There will be a fixture under that hose that needs to be remove. two or three bolts. Under that fixture is the thermostat. Pull it out and replace. Put it back together and you are good to go. Refill the radiator, test and top off if need be and you are done. Keep in mind you may have to remove a couple of things like the air intake.

Dec 31, 2012 | 2007 Mazda B2300

1 Answer

2002 Mazda truck b2300 thermastat location


Follow your upper coolent hose that is connected to the upper part of the rad, Once you see the upper hose, on the rad look where it is going to on the (Engine) That will be where your thermostat will be (Located) On the (Engine) Hope this helps you out.

Oct 10, 2012 | Cars & Trucks

1 Answer

'96 Mazda B2300 Trans. Problems


check the fluid level my just need fluid in the gearbox

May 09, 2010 | 1992 Mazda B-Series

1 Answer

How do you line up the timeing,when changing the timeing belt. 96 mazda b2300


Click on the following free direct Link. It has the Timing: Belt and Mark Diagrams for your 1996 Mazda B2300 Pickup. Plus additional Instructional and Directional Diagrams.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1996/make/mazda/model/b2300/1996_mazda_b2300_timing_belt_diagram_marks.htm

Sep 03, 2009 | 1996 Mazda Pickup

1 Answer

2001 Mazda B2300 engine repair and compatibility


If you threw a rod,This would be a total engine rebuild.(Cost vary by location)
You can use the Ranger motor ,but you will need to swap most of the accessories from the Mazda motor so the wiring harnesses match up.


Please rate this a fixya

Feb 09, 2009 | 2007 Mazda B2300

1 Answer

96 Mazda B2300 when motor is cold runs ruff and stalls until warm


It could be the EGR valve and a bunch of other things. Your truck is new enough it supports OBD-II. You'll need to get the trouble codes read from the truck's computer and that will tell you more information about where the problem lies. Don't guess, get those codes and do a proper diagnosis. You can look up the codes at http://www.check-engine-light.com Good luck!

Dec 22, 2008 | 2007 Mazda B2300

Not finding what you are looking for?
Cars & Trucks Logo

493 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...