Question about 1997 Lincoln Continental

2 Answers

Miss firing and passing raw fuel through exhast , replaced 1 coil , all new plugs and new plug wires

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

Hi,it depends what is causing it..... the low pressure could be head gasket is cracked damaged by that cylinder... crack in head etc.... more then likely something small not the whole engine.... could be piston, head, head gasket etc.... i wouldnt think it would be the whole engine needs to be replaced... hope this helps cheers

Posted on Mar 11, 2011

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 23 Answers

Check the fuel pressure regulator... it is the small round chrome cylinder shaped thing on the fuel rail...unplug the vacuum hose from the top of it and see if there is fuel in the hose if there is you will need to replace the fuel pressure regulator.
hope this helps

Posted on Mar 11, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fouled plugs in #2 and #8 . Changed all plugs and still have a miss and the smell of raw fuel


ignition wires is agood start , check all wires for spark out put with spark tester saves a lot of time.

Oct 29, 2012 | 1997 Chevrolet Tahoe

1 Answer

Dose #2 coil fire #3 cyl also


you have 2 miss fires and you think the coils are the problem you could remove the intake and covers you have 3 coils on the drivers side and wires on the pass side the wires are marked ex: coil right leads to 4 so 1 and 4 then 2 and 5 and 3 and 6 but this is only an example usally missfires are plugs overdue ar cracked plugs so i would replace if never have and at the sametime your answer will be shown

May 24, 2011 | Kia Sorento LX Cars & Trucks

1 Answer

2003 ford taurus - replaced fuel filter & fuel pump - runs great then starts chugging, RPM's drop, pull over, turn it off and wait about 1 or two minutes, then runs great, only in the heat of...


is the car missing when driving? 2000 and on has coil over plug's there are no wires. Is the check engine light on? if so go to an Auto Zone parts store or one that will scan the car computer for free and get the codes out to pin point the problem. Sounds like the cars miss firing. it could be more than one coil and or plug going bad. Did you replace any coil packs? Bad coil packs are 90% of all miss fires on todays cars and trucks.

Aug 09, 2010 | 2003 Ford Taurus

2 Answers

I have a miss fire


Recheck the firing order; 1-6-5-4-3-2

On the distributor passenger side radiator to fire wall. 2-4-6-coil
On the distributor drivers side radiator to fire wall. 3-1-5

Cylinder passenger side radiator to fire wall. 2-4-6
Cylinder drivers side radiator to fire wall. 1-3-5

Good luck and also check the distributor cap again for proper seating.

Nov 13, 2009 | 1998 Chevrolet Blazer

2 Answers

Code po304 #4 cylinder mis fire


ck if you have spark at the coil for that cylinder. check the plug wire closely. if it has spark at the coil, then replace all the spark plug wires.

Oct 12, 2009 | 2000 Cadillac DeVille

1 Answer

2002 escape miss fire on cylinder one. took coil from cylinder 5 and put on cyliner one coil did not fire on cylinder one. took coil from cylinder one put on cylinder 5 and it did fire. 160 lbs of...


power not reaching cylinder 1 ignition coil. check electrical connections and wiring for any damage. test for power and ground at cylinder 1.
hope this helps.

Oct 07, 2009 | 2003 Ford Escape

1 Answer

Lack of power, hesitation, #1 miss firing


you may need to perform a leak down test to the cyliner and maybe you may have carbon on that valve. make sure the new spark plug wire has the correct continiuty

Jul 27, 2009 | Mitsubishi Mirage Cars & Trucks

2 Answers

2001 ford taurus p0301 and p0303


You are mis fireing on cyl 1 and 3 if you replaced plugs and wires and coil this is going to be a fuel injector issue or valve issue. See if you can swap the injectors with known good cyl. and see if it changes. Or have a shop do a fuel injector service on it to see if it helps. It may be to late for the fuel injector service.

Mar 01, 2009 | 2001 Ford Taurus

Not finding what you are looking for?
1997 Lincoln Continental Logo

185 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

fordexpert

Level 3 Expert

5495 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...