Question about 1997 Mazda 626

1 Answer

Wat is a P1407 fault code....I connected a scan tool to a 1996 mazda 626 and I got three fault code P1407,P0303,P0171.....I need help

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 23 Answers

P1407 is egr system no flow

p0303 is cylinder 3 misfire

po171 is fuel control system is lean

you might want to start by checking the mass airflow sensor bolts as they tend to come loose.and that should take care of the po171. check the hoses for the egr, if all is okay possibly the egr solenoid might be faulty. for the p0303 check the sparkplug on cylinder three and the spark plug wire, if you have an ohm meter you can check the resistance of the wire by hooking up your test leads to either end of the wire (after removing it from the engine) and make note of the resistance...then replace that wire and remove another one and test it the same way.. the results should be about the same, if you compare a shorter wire then the resistance will be slightly lower...just as if you test a longer wire it will be a little more. hope this helps

Posted on Mar 11, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

98 dodge ram 1500 5.9L 2wd codes P0300, P0301, P0302, P0303, P0171. What all do I need to do to resolve??


the p0300--p0301-p0302=p0303 are misfire codes and can mean needs tune up or wiring problem and p0171 is system to lean bank 1 with this code if you correct it will probably correct the misfire codes your receiving
http://www.obd-codes.com/p0171 Fixing Hesitating Car P0171 Code YouTube P0171 System Too Lean Bank 1

Aug 26, 2016 | Dodge Cars & Trucks

1 Answer

Hey I have a fault code P0171 on my mazda cx7 any ideas as im 2hrs away from my mazda dealer cheers


I suggest you read this.....................

http://engine-codes.com/p0171_mazda.html

Feb 28, 2015 | Mazda Cars & Trucks

1 Answer

Misfiring


code p0303 refers to cyl 3 misfire detected ===causes engine mechanical fault--wiring--ignition/fuel system--injector--ECT/MAF sensor--ECM
code p0316 refers to misfire detected during start up --first 1000 revs===causes --engine mechanical fault--wiring--ignition/furl system--injector
the common fault cause is ignition/ fuel system and injectors so I would be checking fuel pressure and injector systems for clean and wiring connections are good especially on no 3 injector.

Apr 19, 2014 | Mazda 626 Cars & Trucks

1 Answer

Mazda Protege5 2002


A slim chance, but I doubt it.
If that were the case, you would have codes for all 4 cylinders. What you have is loss of power on cylinders one and three, and 171 is for the fuel mix being too lean. Which could cause the other two codes.
Yes the charging system needs to be verified, but then I would be looking for the problem for code 171.

Feb 23, 2014 | Cars & Trucks

1 Answer

Code p0171,p1407


Firstly block off the EGR with a coca cola can somehow its not necessary ,as for the lean on one bank then read the OBDII with a code reader and with the engine running read the and compare the O2 values ,it may just be a defective sensor on that bank and as its a 96 then it might only have one O2 sensor and not two ,well either way the lean reading is the O2 sensor for sure but which one if two are fitted which it could well have as its a american market vehicle

Feb 07, 2014 | 1996 Ford Mustang

2 Answers

I connected a scan tool to my 1997 mazda 626 and I got 3 fault codes P1407,P0303,P0171please help


My advise is to look at what moistcabbage had to say about your problem. Then I will add a little advise:
Put the P0171 on hold until you have a verified fix for the other 2 codes. Here's why:
.
A misfire causes raw fuel and air to be shoved down the exhaust as an unburned mixture (After all. that's what a misfire is.) This can cause the free oxygen level in the exhaust to rise and cause the lean code (P0171) From the EGR code that you have, I can tell that you have the 2.0L engine in your car. (This is not a valid code for the 2.5L) In this case, moistcabbage is sort-of correct. Thiscode actually indicates that the EGR valve does not move when the computer commands the EGR to open. (Which SHOULD also be producing a P0400 code, which is EGR no or low flow.) If P0400 is not present, then chances are that this is caused by the EGR sensor "lying" to the computer and telling it that the EGR is not opening when it really is. However, it also may be telling the truth and the computer just hasn't picked up on the low flow issue yet. Anyway, if the EGR is not moving, it could be caused by a vacuum leak, which will also cause your P0171code.
The logical order of this would be to check for obvious causes of misfire like the spark plug, wire, coil, and fuel injector and correct as necessary. Also check the EGR system out to find out what the cause of the EGR not moving code is. (And repar as necessary) Then clear the codes and drive the car to see if the P0171 code returns. If P0171 returns and the other codes stay gone, then you will have to check into oter possible causes of the lean code. Otherwise, I would not waste any time checking into a lean condition at all before the other two codes are confirmed fixed.

Mar 11, 2011 | 1997 Mazda 626

1 Answer

My chech engine lite on my 2000 mazda 626 stays on wat can the problem be?


The check engine light is to alert you that the computer has noted a fault in one of the car's systems. Take the car to an autoparts store and have them scan the computer for fault codes. Most parts stores will do the scan for free. Getting the codes will show what faults the computer has identified so appropriate action can be taken. Hope this helped and best wishes.

Sep 23, 2009 | 2000 Mazda 626

2 Answers

Random check engine light appears on acceleration and then off


oil pump sounds like it maybe scavenging for oil ,check oil level, oilpressure----how long since filter was changed? youdoit

Jul 26, 2009 | 1995 Mazda 626

Not finding what you are looking for?
1997 Mazda 626 Logo

Related Topics:

495 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...