Question about 2004 Chrysler Sebring

1 Answer

2003 sebring 2.4l ck engin light on code po340 can you help

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 17,970 Answers

P0340 - Camshaft Position Sensor Circuit Malfunction

This indicates that a problem was detected in the camshaft position sensor circuit. Since it says circuit, that means the problem could lie in any part of the circuit - the sensor itself, the wiring, or the PCM. Don't just replace the CPS (camshaft position sensor) and think that will definitely fix it.

Symptoms can include:
* Hard starting or no start
* Rough running / misfiring
* Loss of engine power

Causes: A code P0340 could mean one or more of the following has happened:
* a wire or connector in the circuit could be grounded/shorted/broken
* the camshaft position sensor may have failed
* the PCM may have failed
* there exists an open circuit
* the crankshaft position sensor may have failed

Possible Solutions: With a P0340 OBD-II trouble code, diagnosis can be tricky at times. Here are some things to try:
* Visually inspect all the wiring and connectors in the circuit
* Check for continuity in the circuit wiring
* Check the operation (voltage) of the camshaft position sensor
* Replace the camshaft position sensor as required
* Check the crankshaft position circuit as well
* Replace circuit wiring and/or connectors as required
* Diagnose/replace the PCM as required


Test it and keep us updated.

Posted on Mar 11, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Codes po340 2004 Sebring


DTC code is P0340 no cam signal at PCM. Chrysler always used to say replace the cam and crank sensors together..wouldn't pay our warranty time at dealer unless we replaced both.

Aug 21, 2014 | 2004 Chrysler Sebring

1 Answer

Po340 code came up on my 1997 sebring 6cyl 2.5 what are the possible causes


The code is for a problem with the cam sensor for bank one.
The sensor and circuit would need to be tested.

Dec 06, 2012 | Chrysler Sebring Cars & Trucks

1 Answer

My 2000 saturns engine light came on i got codes po 341 po122 po340 po 107 po706po714po 731


my engine light also came on one day and I got the same, its common in older cars for this light to stay on all the time, you can truble shoot this by spending money on each of the engine sinsors, but i have had this light on for over 5 years and nothing is wrong with my car

Jul 31, 2012 | 2000 Saturn SL

1 Answer

2003 Hyundai Santa Fe Still Will Not Start PO320 PO340


code p 0320 refers to crank shaft position sensor (CKP)/engine speed (RPM ) sensor---circuit malfunction====causes ---wiring---CKP/RPM sensor ---ECM
code p 0340 refers to camshaft position sensor (CMP) sensor A bank 1---circuit malfunction===causes wiring---CMP sensor ---ECM
following engine work , it is always best to check that all of the harness connections were assemble properly
check for broken wires during the work

Apr 29, 2017 | 2003 Hyundai Santa Fe

2 Answers

PO340 Hard starting.


CODE PO340 IS NO CAMSHAFT POSITION SENSOR CIRCUIT FAILURE.

Jun 03, 2011 | 2003 Chrysler Town & Country

2 Answers

I have a 2003 focus engine code po340 came up as cam sensor so i changed it and cleared the code but light came back on and the same code came up


You need to reset your ECM" computer" May need to call you dealer and ask how you do this, It's not hard just different on all vichele's. Good luck, I'm sure this will help your problem ,

Apr 02, 2011 | 2003 Ford Focus

1 Answer

My wifes 2003 trailblazer is running badly i had


172 is caused by a rich fuel mixture on the right side. It may be caused by a fuel injector not closing fully. Dirt particles can do this. Adding Gum out may help. The other engine codes, 306 and 340 is for missfire which the cam sensor is at fault

Jun 24, 2010 | 2003 Chevrolet TrailBlazer

3 Answers

Code PO340


P0340 is a Crankshaft Position Sensor error. It determines firing order and is most likely the cause of your problem. It's mounted near the oil filter on the engine block. Below is a picture of how it appears in your car. Best of luck.
Greg


23ad084.gif

Jul 13, 2009 | 2005 Chrysler PT Cruiser

1 Answer

I have a 2000 chrysler concorde that the engine light just popped on - the error codes are po302, po420, po340


P0302-cylinder #2 misfire detected
P0420- catalyst efficiency below threshold bank 1
P0340-No cam signal at PCM.
The Cam sensor most likely needs to be replaced first. Clear the codes after that and drive and see what comes back on.

May 29, 2009 | 2000 Chrysler Concorde

Not finding what you are looking for?
2004 Chrysler Sebring Logo

1,455 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...