Question about 2002 Jeep Liberty

1 Answer

What size is the socket to remove the OEM oil sending sensor on my 2004 3.7 v6 liberty??

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Jeep Master
  • 540 Answers

Unfortunately you will have to buy an oil sender socket due to the odd shape

Posted on Mar 11, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change the oil sending unit


No year make model???? Then I'll be vague too!

Find the sensor, usually near the oil filter depending on what car or truck model and engine size...

Unplug wire from sensor

Use appropriate wrench or socket to remove it

Apr 11, 2015 | Cars & Trucks

2 Answers

How do I change my oil pressure unit


If it is like my 4.6 northstar in 99 deville, it's not easy. From under car look up beside oil filter and you can see to unit. Remove filter for better access, but still not easy.

Feb 23, 2015 | 2004 Cadillac Escalade

1 Answer

Where is oil pressure sensor on 2004 corvette


The oil pressure sending unit is located under the left bank (driver's side) close to the firewall. Remove the left bank cover and you should see it toward the center left on the intake manifold. These things stick pegged sometime. Just replace it. Remove the plug on top and use a deep socket with a wiggler and a few extensions. first time may take 45 minutes, and half that if it has to ever be done again. Look for a brass one like at O'rielly's or use an OEM.

May 30, 2014 | 2003 Chevrolet Impala

1 Answer

I have a 1989 gmc s-15, I need to replace the oil pressure sensor, what size socket do I need?


well go to auto parts store buy the oil pressure sending unit then while you at auto parts store you can take new oil pressure sending unit try different size sockets to find the correct size socket you need.

Oct 27, 2013 | 1983 GMC S-15 Pickup

2 Answers

Where is the oil pressure sending unit on a 2005 4X4 Suburban 1500 5.3 liter


Removal & Installation 4.8L, 5.3L & 6.0L Engine To Remove:
  1. Remove the engine sight shield. chevy_aval15_02-04_opcon.gif

  2. Disconnect the oil pressure sensor electrical connector. chevy_aval15_02-04_opsocket.gif

  3. Using J41712 sensor socket or equivalent, remove the oil pressure sensor.
To Install:
  1. Apply sealant GM P/N 12346004, (Canadian P/N 10953480), or equivalent, to the threads of the sensor.
  2. Using J41712 sensor socket or equivalent, install the oil pressure sensor. Tighten the sensor to 15 ft. lbs. (20 Nm).
  3. Connect the oil pressure sensor electrical connector.
  4. Install the engine sight shield.
8.1L Engine To Remove:
  1. Remove the engine appearance cover.
  2. Disconnect the electrical connector from the oil pressure sensor.
  3. Use a special socket such as J 41712 to remove the sensor.
To Install:
  1. If installing the old sensor, apply sealant GM P/N 12346004 (Canadian P/N 10953480), or equivalent, to the threads of the sensor.
  2. Using J 41712 or equivalent, install the sensor. Tighten the sensor to 22 lb ft (30 Nm).
  3. Connect the oil pressure sensor electrical connector.
  4. Install the engine appearance cover.
prev.gif next.gif

Aug 05, 2010 | 2004 Chevrolet Suburban

1 Answer

2004 hyundai elantra oxygen sensor


Your Elantra has more than one oxygen sensor. There is a pre-catalyst sensor and a post-catalyst sensor. Both can be found on the exhaust. You simply disconnect the sensor wire and remove the sensor plug with the proper size deep socket. Be sure you have the correct sensor for replacement.

Because of the heat involved with the exhaust, make sure the engine is cool before attempting to remove and replace the sensors. They may be tough to remove so a shot of WD-40 or 5-56 spray may need to soak into the threads to ease removal. When you replace the new sensors, a coating of anti-seize will be helpful for future removal.

Keep in mind that one malfunctioning sensor can send information that will set off codes on other sensors "downstream" or send codes from other emission controls on the engine.

Mar 27, 2010 | 2004 Hyundai Elantra

1 Answer

Oil sending unit on 2004 chrysler sebring V6


Should be located close to the oil filter. It will screw in like a spark plug. It has a harness plug. Easy to change, save yourself $70 in labor. You will need a fairly large wrench to remove

Jan 03, 2010 | 2004 Chrysler Sebring

1 Answer

Where is the oil sending unit on a 2001 4.3 liter vortec v6


ENGINE OIL PRESSURE SENSOR OR SWITCH REPLACEMENT

TOOLS REQUIRED
J 41712 Oil Pressure Switch Socket

REMOVAL PROCEDURE

IMPORTANT: Clean the area around the sensor and Distributor before removal. Do not allow debris to enter the engine.

89348473

  1. Remove the distributor.
  2. Disconnect the engine oil pressure sensor electrical connector.
  3. Remove the engine oil pressure sensor using the J 41712. IMPORTANT: Note the alignment of the engine oil pressure sensor fitting prior to removal.
89348474

  1. Remove the engine oil pressure sensor fitting, if necessary.
INSTALLATION PROCEDURE

89348474

  1. Apply sealant GM P/N 12346004 or equivalent to the threads of the fitting and/or the engine oil pressure sensor. NOTE: Refer to Fastener Notice in Service Precautions.
  2. Install the engine oil pressure sensor fitting, if removed. Tighten Tighten the engine oil pressure sensor fitting to 15 N.m (11 lb ft) .
89348473

  1. Install the engine oil pressure sensor. Tighten Using the J 41712, tighten the engine oil pressure sensor to 30 N.m (22 lb ft) .
  2. Connect the engine oil pressure sensor electrical connector.
  3. Install the distributor.
  4. Check and adjust engine oil level.

Jun 05, 2009 | 2001 Chevrolet Blazer

2 Answers

2002 V6 Jeep Liberty-Oil Pump Replacement


Yes you have to check your pressure with a mechanical gauge first. If the pressure reading is good replace the oil pressure sending unit. They are known to go bad, and oil pumps going bad is rare. 

Oct 29, 2008 | 2002 Jeep Liberty

Not finding what you are looking for?
2002 Jeep Liberty Logo

Related Topics:

157 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...