Question about 1990 Acura Legend

1 Answer

I'm trying to fix exterior handle on driver door. Cannot get the door panel off. removed all visible screws as well as two behind interior handle. can't get the top portion loose(by the window).Dont want to break any thing.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 83 Answers

You have to pull it away from the door itself it will take some force to do this the panel also has plastic clips to hold it to the door as well start at the bottom an work your way up when you get to the top part where the window is slide panel straight up (make sure the window is down). good luck

Posted on Mar 11, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do you replace the passenger side exterior door handle? Mine pulled off


It means removing the interior door panel and working inside the door. The linkages (if any) must first be disconnected and then the fixings removed and the handle fiddled from it's position. These days the fixings are generally screws but small nuts were common in the past.

The work is fiddly and frustrating for those unused to working in the confines of a door and visibility is not good especially when working in sunlight or good daylight as few worklights can cut through the inky shadows.

Nov 07, 2016 | Cars & Trucks

1 Answer

How do remove the interior panel of the front door?


look for small plastic caps that hide the screws that are usually around the bottom of the armrest and in the plastic area of the interior door handle. you will have to hold the handle in the open position to remove the plastic surround. There will be a red section on the interior door button that is visible when the door is in the unlocked position, you will have to remove that by using a thin blade of some sort as that red bit is the actual clip that holds the button onto the rod.
Once all the screws etc have been removed you have to pry the panel away from the door by going around the perimeter of the door panel.
there will be plastic that seals the door which you will definately have to replace unless you want water to enter the interior of the car from the door.
this info may not be exact but it should give you and idea of what you need to do.

Jul 23, 2014 | 2008 Ford Focus

1 Answer

How do you replace drives side exeior door handel for 95geoprizm


1) Remove the plug inside the interior armrest and remove phillips screw.
2) Remove armrest and two screws that hold door panel to door frame.
3) Pop the outer cover off the interior door handle.
4) Remove the interior lock knob and remove door panel by popping out tabs connected to door frame and lifting up off of window ledge.
5) Remove the two nuts holding exterior handle in place.
6) Disconnect the L shaped linkage from the handle. The trick to getting the L shaped linkage into the new handle is to feed L shaped metal pole through hole in door where exterior handle was, leaving the lower end of this linkage in its slot.
7) Feed the end of L shaped pole through the plastic 'hinge' in new handle by folding the hinge over and pushing the end of the L through both sides of the plastic hinge at once. slide the lower loop of the plastic hinge down the L shaped pole to secure pole to handle.
8) Place new handle into door and reverse the process to reinstall interior panel.

Hope this helps Tim

Apr 17, 2011 | 1995 Geo Prizm

1 Answer

Thank you for your response , been going crazy here...got panel off enough to put hand in but don't know where to pull to unlock door.



Jaguar 2000-06 - Locks & Lock Systems
Power Door Locks - Removal & Installation

Door Lock Switch
Door Lock Diagnosis & Testing

  1. Visually inspect the following:
    Misaligned door(s), hood or luggage compartment lid Door latches Actuating rod Exterior door handle Interior door handle Door lock cylinder Cable Luggage compartment lid exterior release switch Fuse(s) Wiring harness Electrical connector Door lock actuator Remote transmitter batteries Vehicle battery Remote transmitter Door lock switch Front electronic module
  2. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.

Door Lock Motor
Coupe And Convertible
  1. Turn ignition key to position II.
  2. Motor door glass to fully raised position.
  3. Turn ignition key to position O.
  4. Disconnect the negative battery cable.
  5. Remove door casing for access.
  6. Remove door water shedder.
  7. Position PVC secondary water shedder for access.
  8. Slacken and remove the door glass rear runner lower securing screws.
  9. Reposition door glass rear runner. Mark the position of the glass rear runner upper securing screw.
  10. Slacken and remove the upper securing screw and move the runner away from the glass.
  11. Disconnect door handle and lock barrel (driver door only) operating rods from latch links.
  12. Slacken and remove the three latch assembly securing screws and position latch for access.
  13. Remove latch motor harness multiplug from mounting bracket and disconnect multiplug.
  14. Release operating cable from door handle. Move inner door handle to the locked position. Remove operating cable outer abutment from support bracket. Disconnect cable inner from door inner handle.
  15. Remove lock motor assembly from door.
  16. To install, reverse removal procedure.

    zjlimited_378.jpg

    Fig. Removing door lock actuator


Sedan
  1. Remove the door window glass
  2. Detach the interior door handle.
  3. Detach the actuator remote cable from the interior door handle.
  4. Remove the interior door handle.
  5. Detach the door window glass run.
  6. Remove the exterior door handle retaining screws.
  7. Remove the front door actuator retaining screws.
  8. Reposition the front door actuator and exterior handle.
  9. Remove the front door actuator and exterior handle.
  10. Disconnect the front door actuator remote cable.
  11. Detach the door lock cylinder connecting rod (1).
  12. Detach the exterior door handle connecting rod (2).
  13. Remove the front door actuator (3).
  14. To install, reverse removal procedure.

    zjlimited_379.jpg

    Fig. Removing door lock motor-Sedan



Hope this helps.

Dec 31, 2010 | 2002 Jaguar X-Type

1 Answer

How do I remove the drivers window controls on a 2004 Mercedes Benz C240


Hi,

If you cannot see any bevelled edges to remove the master switch control, my suggestion would be the most common.... to remove all visible screws securing the interior panel to the door frame, e.g. behind door release handle, behind inside grip hande (as circled in photo), then slide & lift the interior door panel away slightly as one assembly, just enough to reveal any electrical wires.

Disconnect all wire looms from behind interior door panel...

Then, view switch assembly from behind the door panel, to determine best method to remove. Most modern switch assemblies are simply held in place by molded clips on the switch body, which need to be pushed out from behind.

36e466a.jpg

Cheers,

"If this has helped you in any way, please rate this solution"

Jan 25, 2010 | 2004 Mercedes-Benz C-Class

1 Answer

How do I replace the driver's side door handle on a 2001 Chevy Tracker 4 door


Interior or exterior handle? Remove the door panel first. They make a special tool for removing the window crank, but usually you can get it off with a screwdriver. There is a little clip under the crank that needs to be removed first. Then remove the door handle itself, this has a screw in it. Then pull the panel off. With the window in the fully down position or the up position you should be able to get to the handle itself for the exterior. If it's an interior handle just remove that without taking the door handle off. This is all pretty self explanatory once you see it.

Dec 15, 2009 | 2001 Chevrolet Tracker

1 Answer

Need to remove inner rear passenger side door


On the inside trim, you can remove screws (these screws may be covered by filler pieces or may be visible, or they may require you pry a plastic piece off that covers the screws) that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you need to pull back the weather seal and then you can access the bolts securing the outer handle

Nov 05, 2009 | 2006 Honda Pilot

1 Answer

Door panel


go to http://forums.vwvortex.com/zerothread?id=1015107 This is a three part article that includes instructions for removing and re-installing the interior metal panel for front doors on jettas.

Apr 25, 2009 | 2000 Volkswagen Jetta TDI

1 Answer

Exterior rear door handle on Honda Accord 2001


To Remove Door Panel on 2001 Honda Accord:

A: To remove the plastic piece with the door lock button and door handle connected to it:

1- Remove the screw in the middle located behind a plastic cover button
2- Push (slide) the whole assembly Forward (toward front of car)
Besides the screw, it is held in place by 3 hooks on the backside that hook into holes in the metal door frame
3- Now unhook handle from small metal bar going through door by pushing (toward door) plastic clip (blue?) off of the bar, then the bar will come out of the clip hole, thus releasing the handle.
4- Depress little grey button /bar (purple painted on it)on elec. connector to seperate connector, thus releasing door lock switch

Now the whole assembly (metal handle, door lock switch, and plastic piece) will come off door panel

B: The door is held on by 2-screws, 7-plastic snaps/plugs, and 1-plastic plug.

The screws are located: bottom of hand hold and the other behind the handle, both covered by little covers that have to be pryed off to access the screws.(hint: the screw with the built in spacer goes behind the handle when you are trying to reinstall)
The 7-plastic snaps: 3 across bottom and 2 on each side. Not visible, they are mounted to the inside of the panel.
The 1-plastic plug is visible at the upper front of the panel and is the same color as the surrounding trim


C: Take off the big plastic triangle piece above the door panel and behind the mirror. Pull/pry off. It has 2 snaps holding it on. one near bottom and one near the front.

D: Light lens prys off from bottom. Unscrew (1/4 turn) the light assembly with bulb still intact from backside of panel

E: Remove the Hand-Hold/window switch assembly:

Jan 14, 2009 | 1997 Toyota Camry

1 Answer

2001 Nissan Quest - Broken Exterior Sliding Door Handle


you can do this. you have to remove inside trim panel for access. if you still need to do, I will send you repair steps. let me know

Oct 16, 2008 | 2001 Nissan Quest

Not finding what you are looking for?
1990 Acura Legend Logo

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...