Question about 2002 Acura 3.2TL

1 Answer

My transmission is not functioning and I would like to replace it. VIN 19UUA56822A043732. What do I need to replace transmission? What parts are necessary?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    MVP:

    An expert that gotĀ 5 achievements.

    Master:

    An expert who has achieved Level 3.

    Sergeant:

    An expert that hasĀ over 500 points.

  • Master
  • 461 Answers

IT,S BEST TO GET IT REBUILT OR FINE YOU A NICE USE ONE BECOSE IF YOU BY PARTS FOR THE TRANS THEY WILL STILL HAVE TO GO INSIDE ANYWAY SO IT BETTER TO REPLACE IT OR FINE A USE ONE YOU WILL COME OUT CHEAPER THAT WAY

Posted on Mar 11, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

What digit in my vin number indicates transmission type for a ford aerostar 93 3.0 ? thank you


The VIN does not designate transmission type. You will need to get the information off of the transmission itself.

Dec 22, 2016 | Ford Cars & Trucks

1 Answer

Gm codesB1001


#PIC5913: Diagnostic Tip - B1001 With SIR MIL And/Or SVS MIL And/Or Locked Radio - (Sep 19, 2013)
Subject: Diagnostic Tip - B1001 With SIR MIL And/Or SVS MIL And/Or Locked Radio Models: 1998-02 Chevrolet Astro, Venture, S10, Blazer, Trailblazer, Camaro, Cavalier, Corvette, Impala, Monte Carlo, Lumina, Malibu, Metro, Prizm, Express 1998-02 GMC Safari, Savana 1998-02 Pontiac Bonneville 1998-02 Pontiac Firebird Models, Sunfire, Grand Am, Grand Prix, Montana 2001-02 Pontiac Aztek 1998-99 Buick Riviera 1998-02 Buick LeSabre, Park Avenue, Century, Regal 2002 Buick Rendezvous 1998-99 Oldsmobile Cutlass 1998-02 Oldsmobile Bravada, Aurora, Intrigue, Alero 1998-02 Cadillac DeVille, SeVille, Eldorado, STS, SLS, Catera, Escalade Models The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in this PI.
Condition/Concern Some vehicles may exhibit a B1001 DTC with an SIR lamp, SVS lamp on and/or radio locked, possibly after module replacement (i.e. BCM, SDM, etc.). This information is presented to clarify the failure modes that will set this DTC, as well as offer a diagnostic direction to help repair them.
DTC B1001, by definition, is a "configuration mismatch" between vehicle modules that communicate with each other over a data line. Modern vehicle systems depend upon each module storing certain vehicle information, as well as information about other modules in order to work properly together. Common causes of B1001 are:
  1. An incorrect or non-existent VIN number in modules that require them.
  2. A module that has been replaced but not programmed per currently published service information.
  3. SDM replacement where the new SDM is a different (newer) part number than the original.
Recommendation/Instructions A common diagnostic approach that will address most concerns with B1001 is as follows:
  1. Ask the technician if a module has recently been replaced which led to the B1001 DTC. If so, determine if the service information procedure for replacing the affected module has been followed. For example, some callers mistakenly believe that a new BCM simply requires "theft deterrent relearn" to operate properly. However, many modules require a "new module setup/RPO configuration" procedure to operate properly. The process for setting up a new module varies, consult currently published service information for the correct procedure for your application.
  2. If an SDM has recently been replaced, the BCM requires the last 4 digits of the SDM part number to be stored in a portion of the BCM to prevent DTC B1001. If the SDM's service part number is different than the original module, a special procedure is required to erase and re-learn this "restraints ID" code in the BCM. While the procedure varies from vehicle to vehicle, there are two standard methods as follows:
    1. On some vehicles the Tech 2 has a function available in the BCM or SIR "Special Functions" menu. Common terminology is "setup SDM part number in BCM" or similar nomenclature. Follow on-screen instructions to complete procedure.
    2. Some vehicles require an "SPS" method of programming the restraints ID. Perform the "Request Info" step at the vehicle and confirm the VIN number stored, then take the Tech 2 back to the terminal and down-load the appropriate file from the TIS2WEB "available modules" menu.
  3. If neither of the above are successful in clearing B1001, check the following modules with the appropriate Tech 2 data list under "VIN" or "module information" to determine if the correct VIN number is stored.
PCM: If the PCM does not have a VIN stored, or the incorrect VIN is stored, it will be necessary to program the PCM using the current SPS method. If the PCM already has the latest calibration software installed, it will be necessary to contact Techline Customer Support Center (TCSC: 1-800-828-6860 English or 1-800-503-3222 French) and request a VCI number to allow reprogramming with the same calibration.
BCM: If the BCM does not have a VIN stored, or the incorrect VIN is stored, it will be necessary to install the correct VIN using the appropriate line under the BCM's "special functions" menu. Follow on-screen prompts to complete programming.
Radio: If the Radio does not have a VIN stored, or the incorrect VIN is stored, it will be necessary to install the correct VIN using the appropriate line under the radio's "special functions" menu. Follow on-screen prompts to complete programming.
Please follow this diagnostic or repair process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the remaining steps do not need to be performed.

Jun 02, 2014 | 2000 Chevrolet Malibu

1 Answer

I would like to replace my transmission in a 2002 mercury sable 3.0 ohv what modle year in the ford taraus family is interchangerble


You need to call your local ford dealership and have them run your vin. There are 3 different transmissions for this vehicle. Ax4n-ax4s-4f50n..then call the parts department and they can tell you....

Mar 19, 2014 | 2002 Mercury Sable

1 Answer

I have a 2001 Dodge Dakota with a New Process Gear 26384 P52118782 AH436986 580172 2 A4 B2 02/20/01 17 22 Transmission I have lost 2nd gear and have to rev up to 3500 rpm at 30 mph to shift to 3rd and...


the spares department will be working off the results of a build of material issued from the factory for what was installed into each vehicle for certain vin numbers or build dates
That is why they ask for date and year of manufacture and the vin number if there is a cross over of equipment installed
if you consider that you have something different , take it to an accredited professional tansmissio shop and have it properly identified and then use that identification when ordering parts

May 19, 2017 | Dodge Dakota Cars & Trucks

1 Answer

I have a 1993 Chevy S-10 4.3L automatic. The heat won't shut off. It pours out regardless of the position of the climate controls. Coolant level and condition good. AC would work but. Thanks.


#46-12-03: AIR CONDITIONER BLOWS WARM AIR (REPLACE A/C DELAY RELAY) - (Apr 7, 1994) 999999995.gif REVISION: 04/14/94
THIS BULLETIN IS BEING REVISED TO CORRECT THE TRANSMISSION LISTED IN THE MODELS. ----------------------------------------------------------------------
SUBJECT: AIR CONDITIONER BLOWS WARM AIR (REPLACE A/C DELAY RELAY)
MODELS: 1994 CHEVROLET AND GMC TRUCK S/T PICKUP WITH 4.3 ENGINE (VIN Z - RPO LB4), 4L60E TRANSMISSION (M30) AND AIR CONDITIONER/MANUAL CONTROLS (C60); OR 4.3 ENGINE (VIN W - RPO L35) AND A/C (C60)
BUILT BEFORE THE FOLLOWING VIN BREAKPOINTS:
PLANT DIVISION VIN LINDEN GMC RK501034 SHREVEPORT GMC R8501199 SHREVEPORT CHEVROLET R8105893 LINDEN CHEVROLET RK103097
CONDITION:
SOME OWNERS MAY EXPERIENCE A CONDITION WHERE THE AIR CONDITIONER IS TURNED ON AND DELIVERS ONLY WARM AIR.
CAUSE:
THE AIR CONDITIONER COMPRESSOR MAY DELAY LONGER THAN THE "ORIGINAL DESIGN" INTENDED 12 SECONDS, OR MAY NOT ENGAGE, DUE TO THE POSSIBLE MALFUNCTION OF THE COMPRESSOR DELAY RELAY.
CORRECTION:
TRUCKS BUILT BEFORE THE VIN BREAKPOINTS LISTED ABOVE MAY NEED A NEW AIR CONDITIONER DELAY RELAY. REPLACE ONLY WITH 15990540 AIR CONDITIONER COMPRESSOR DELAY RELAY. SPECIFIED PROCEDURE IN SERVICE MANUAL NATP 9429, PAGE 1B-59. TEST AIR CONDITIONER OPERATION FOR DELIVERY OF COOL AIR.
NOTE:TO TEST FOR PROPER OPERATION, PUT THE A/C CONTROL ON THE "OFF" POSITION, START THE ENGINE, THEN PLACE THE A/C CONTROL IN THE "ON" POSITION. THIS SEQUENCE WILL PROVIDE IMMEDIATE ENGAGEMENT OF THE AIR CONDITIONER COMPRESSOR. WHEN THE ENGINE IS STARTED WITH THE A/C CONTROL ALREADY "ON", THERE WILL BE A NORMAL 15.0 SECOND DELAY FOR THE AIR CONDITIONER TO ENGAGE.
SERVICE PARTS INFORMATION:
P/N DESCRIPTION QTY
15990540 A/C COMPRESSOR DELAY RELAY 1
PARTS ARE CURRENTLY AVAILABLE FROM GMSPO.

Jul 29, 2011 | 1994 Chevrolet S-10 Blazer

3 Answers

Engine light is on, flashes when driving above 100 Km


stop by local parts store (Autozone,Advance, etc) and have them do a free fault code test. They can print out a list of faults and clear the codes

Jan 02, 2011 | 1998 Ford Explorer

2 Answers

Need transmission diagram


If you walk into the dealer parts dept with your VIN and tell the parts person you need a picture of the parts you want so you can come back with a parts order they'll show you the picture and print out the one you need. If they know you at all and don't give em a hard way to go they may even fax you the picture youwant HAVE the VIN ready !!

Aug 12, 2009 | 2002 GMC Yukon XL

2 Answers

Need to try to identify transmission from vin numer


what transmission does a dodge van 2500 v8 318 take vin#2B7HB21YVK533060

Feb 14, 2009 | 1988 Dodge D-Series Pickups

2 Answers

1998 Dodge 1/2 ton truck transmission


if you have the vin number i can help

Jun 30, 2008 | 1988 Dodge D-Series Pickups

Not finding what you are looking for?
2002 Acura 3.2TL Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...