Question about Ford Mustang

1 Answer

I have a 64' mustange that just had a new harness put on it, it came in the shop overcharging, I hooked everything up the way the diagram showed but it burned up the new regulator I just put in. (it came in with a burned up one too) The guy that worked on it before me had the alt. running full speed. my question is what does the letters on the regulator I,A,S,F, stand for? and where do they go?something is still miswired.

Posted by on

  • bhauk Aug 03, 2008

    i'm sorry, I was actually a 1923 T bucket, but he told me everything on it was 64'(drivetrain, electric, ect.)after evaluating it I found out it was a 65, with 64' harness. real nice car but the guy that had it wired it wrong. I got the wiring right but he smoked the alt.and reg. got it fixed. thanks anyway.

    Bart



    send me some info on you buisness.I may use you another time I own a shop and sometimes get stumped. I stumbled on your website looking for a wiring diagram.



    Bart

    Oakdale Truck and Auto

    Toledo, Oh.

  • 63grand prix Aug 25, 2008

    i have a 90 bronco full size. when u turn left everything dies. no raido nothing.

×

1 Answer

Turn on key look at dash . does it say alt or gen a 64 mustang had genorator not alt

Posted on Aug 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

It's a 95 ford explorer and we bought a wiring harness for the new radio, the old radio worked fine and everything. We hooked up the new radio to the wiring harness and it powered on and everything, b


try hooking the radio power wires to the battery! To '' TEST'' twist red and yellow put on the poss. blk. on neg. ! take a speaker and test speaker wire out put! if don't work output is blown out! but will still work with rca jacks hook to small amp ! this to pull sound out of your radio for sure!!

Dec 27, 2012 | Cars & Trucks

1 Answer

I need a diagram to put a wiring harness from a 1994 4.0 jeep wrangler in a 1993 4.0 jeep wrangler


check chiltons manuals, they usually have wiring diagrams in the back of them to show you all you need. its hard to find online ones. you always have to pay for those ones

Mar 21, 2012 | 1994 Jeep Wrangler

1 Answer

I cant get sound out of my speakers. i put in a new stereo and hooked it up


Did you use a wire harness specific to your vehicle year and model? Make sure you get the right harness, depending on what factory system came with the car(base or mach460 sound systems), If your speakers were working prior to replacing the radio, then there's a possibility that the harness may not be compatible. also, the car may be equipped with a factory amp(mach460 systems). Here's a link that may help you figure it out. http://www.modifiedlife.com/2000-ford-mustang-car-stereo-wiring-instructions/

Sep 23, 2011 | 2000 Ford Mustang

1 Answer

I riped the engine out of a 1988 Mustang GT. I put a new engine in but I would like to know how to find the ignition, amp meter oil gauge, tach hook up and stuff like that. I can't find a book so I could...



  • Here is the main spider harness diagram. If you are going to take on a project like this you need to get a Haynes Manual for that car. I took the liberty of locating it. Used by mechanics everywhere. It is very detailed with pictures, diagrams, everything. Get this book and you will have everything you need.
http://www.haynes.com/products/productID/158
Regards, Tony
ironfist109_57.jpg

Apr 28, 2011 | Ford Mustang Cars & Trucks

2 Answers

My fuse number 8 keeps blowing in my 1996 ford mustang. I dont know much about cars. Can anyone help me please???


You owners manual will tell all the things protected by that fuse.Unplug everything the book list,put in a new fuse and if it does'nt blow then start plugging the harnesses back in an the defective part will make the fuses blow.If it blows with everything unplugged,then the problem is in you harness.Have fun!

Oct 19, 2009 | 1996 Ford Mustang

1 Answer

Wire harness dont know how to hook up radio cause colors dont match up


If your puting in a aftermarket stereo system, they make adapters that will plug into the factory harness and have a diagram of what to hook up to your new stereo. They should have one of these at a stereo store or even auto parts or Wal Mart. I had to put one in my 89 Caravan and 88 Prelude. I got them from the local stereo store and they were about $12 bucks or so. Depends on how much your stereo place overcharges.

Hope this works for you....

Oct 16, 2009 | 2000 Oldsmobile Alero

2 Answers

Wiring diagram or color chart for a 96 ford mustang radio harness


dont even worrie about it just go to walmart or an auto parts and get a wiring harness they are not so expensive

May 28, 2009 | 1996 Ford Mustang

1 Answer

Need to finish my car but dont know how to get wiring diagrams with listed colors


Robbie, doing a harness overhaul with diagram is a mess, try a salvage yard to find harness you need, or look for one in remanufactured books for your car. I have done harnesses from scratch and can't tell you what a pain it is getting it right and fixing plugs for origional connections. If you find one at salvage take it out yourself so you understand how to hook it up. This is without a doubt the best advice that can be given in this case.

Apr 26, 2009 | Ford Mustang Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...