Question about Jaguar XJ8

1 Answer

Engine Malfunction Light came on. - XJ8 Jaguar Cars & Trucks

Posted by on

  • 3 more comments 
  • voxstarr Aug 24, 2008

    The engine malfunction light came on 3 days ago on my 2005 Jaguar X-Type. The car runs fine, but the owners manual says that special diagnostic equipment is required to repair such falts. Is it ok to drive like this, or do I have to take it to a dealer and pay the "big bucks" as Jaguar intends?.

  • Anonymous Sep 25, 2008

    xj8 with engine check light on...Mechanic runs a scan showing Code 1647, oxygen sensor OS2 upstream at fault...replaced OS2 sensor upstream....light still on...took it to another mechancic...another scan...another Code 1647..Mechanic say ok to drive car....been driving now for 2 weeks...runs fine..dead end. Jerry

  • Anonymous Nov 26, 2008

    My engine malfunction light just came on today. I didn't notice any driving problems but did notice my doors don't lock now. Any clues?

  • Anonymous Dec 23, 2008

    Engine Malfunction Light came on. problem, x type jag any ideas

  • dbcoolcars1 Apr 24, 2009

    engine malfuntion light on 2002 x type 2.1 v6 petrol, did initialy run poor but left it a while now its fine but light still on?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I av jaguar stype 3000 sport manual on 51 plate accelratin to bout 25 mph its esertatin an pullin back dus it wen u get to 25 an over any ideers thanks

Posted on Dec 09, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Malfunction light on. rapping sound in engine when stepping on or letting off gas.


Oil filter caused check engine light? - Kia Forte Forum : Sedan ...

www.forteforums.com/.../4315-oil-filter-caused-check-engine-light.html

Dec 16, 2010 - 14 posts - ‎7 authors
I'll start out by saying I recently bought my 2010 Kia Forte Sedan with 20000 miles already on it. The other day the check engine light came on ... Malfunction indicator light!! Please Help!
11 posts
Aug 1, 2013
KIA Check Engine Light (CEL) Codes
15 posts
May 19, 2012
Malfunction Light ON!
15 posts
May 19, 2012
Check Engine Light + P200A code on new 2011 SX
15 posts
Jun 7, 2011
More results from www.forteforums.com

Nov 15, 2015 | 2010 Kia Forte

1 Answer

Engine check light won't come on when engine is cold.


The check engine light should not come on at all. If it does than you need to put it on a code checker, to find out the reason for the check engine light coming on. The light is known as the malfunction indicator light (MIL). When it comes on it indicates a malfunction in the system.

May 03, 2014 | 2008 Kia Rio

1 Answer

I have grand cherokee 2001 limited the code p0700 is apper the gear is started scend shift espically in morinig


possible causes
Shorted or open circuit within Transmission Control Module (TCM)
- Faulty Transmission Control Module (TCM)
symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Driveability problems
- Transmission shifting problems
p0700 description
The transaxle Control Module (TCM) monitors the malfunction of sensors and actuators relating to transaxle control. When the TCM detects a malfunction with the control, a signal is send to the Engine Control Module (ECM) to trigger the Engine Light or Service Engine Soon light. The ECM stores the P0700 code and it means the TCM detected a malfunction with the transaxle controls.

Read more: http://engine-codes.com/p0700_jeep.html#ixzz2hihK6PVo

Oct 14, 2013 | 2001 Jeep Grand Cherokee

1 Answer

Engine malfunction indicator light


Take it to a mechanic or a auto parts store have them read the code with a OBD scanner. That will tell you why the light is on.

Jul 20, 2013 | Toyota Cars & Trucks

1 Answer

O/d light blinks when driveing o/d seems to be engaged car has 198000 miles and runs very good also engine light is on


O/D light blinks, but with that the check engine light is ON.--- This will make your troubleshooting easier.When the check engine light comes on, and remains on, this indicates that there is error stored in your cars computer.---- Once the computer is scanned, you will get error codes, as per that error code it will point towards faulty part, which is causing the O/D light to blink.-------- Most probably the O/D light blinks, If a problem exists in No. 1 or No. 2 solenoids or speed sensors .
--------------- For car after 1995 it requires OBD2 tool and for car before 1995 it requires OBD1 tool.------- --------- You car will require OBD1 tool.There are very few auto parts store and repair centers who have OBD1 tool.In your case you required OBD1 tool.------ You can just contact local auto-parts store and they will guide you to the nearest store who has OBD1 tool.There you can get your car scanned.If there is error set in your cars computer, then you will receive the error code.As per error code it will point towards the faulty part causing this problem in your car.------------- -------------- The codes which you get is scanning will be mostly any of this following codes:--- DTC P0500 - Vehicle Speed Sensor Malfunction
. DTC P0750 - Shift Solenoid "A" Malfunction
. DTC P0753 - Shift Solenoid "A" Electrical Malfunction
. DTC P0755 - Shift Solenoid "B" Malfunction
. DTC P0758 - Shift Solenoid "B" Electrical Malfunction
. DTC P0770 - Shift Solenoid "E" (SL) Malfunction
. DTC P0773 - Shift Solenoid "E" (SL) Electrical Malfunction
. DTC P1520 - Stop Light Switch Signal Malfunction
. DTC P1705 - Direct Clutch Speed Sensor Circuit Malfunction
. DTC P1765 - Shift Solenoid Valve SLN Circuit Malfunction
. DTC P1780 - Park/Neutral Position Switch Malfunction
--------------- Now it all depends on what code you get, as per that you can replace the following part.------- This will help.Thanks.Helpmech.

Jul 07, 2011 | 1995 Toyota Camry

2 Answers

Error P0700. What is the cause? How to repair it?


P0700 JEEP - Transaxle Control System Malfunction
The transaxle Control Module (TCM) monitors the malfunction of sensors and actuators relating to transaxle control. When the TCM detects a malfunction with the control, a signal is send to the Engine Control Module (ECM) to trigger the Engine Light or Service Engine Soon light. The ECM stores the P0700 code and it means the TCM detected a malfunction with the transaxle controls.

Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Driveability problems
- Transaxle shifting problems

Possible causes
- Shorted or open circuit within transmission control module (TCM)
- Failure of transaxle control module

Tech notes: Since the P0700 is just and informative code, check the TCM for more codes to resolve the problem. So you'll have to have the dealer or another qualified shop/technician pull the transaxle codes from the TCM and go from there.

Good luck (remember to rate this answer)

Jan 17, 2011 | 2004 Jeep Grand Cherokee

2 Answers

Engine light stays on dash instument panel. Whats wrong????


could be one of 10000 items that are some related and others not related. you need to get the engine scanned with a scan tool.

Dec 03, 2009 | 2003 Dodge Caravan

1 Answer

Engine malfunction light on


USE A CODE READER FREE FROM AN AUTO ZONE AND FIRST DETERMINE WHAT CODE IS COMING UP. JUST GOE TO AUTOZONE AND ASK THAT THEY USE THE CODE READER TO DETERMINE WHY YOUR ENGINE LIGHT IS ON

Apr 22, 2009 | 2004 Jaguar XJ-Series

2 Answers

What are the diag codes for my 2005 sonata, 6 cyc. motor, the check engine lite comes on dominic.livoti@ngc.com


Hyundai Specific Trouble Codes Code Description P1100 Manifold Absolute Pressure (MAP) Sensor Malfunction (Open/Short) P1102 Manifold Absolute Pressure (MAP) Sensor Malfunction - Low Voltage P1103 Manifold Absolute Pressure (MAP) Sensor Malfunction - High Voltage P1147 ETS Sub Accel Position Sensor 1 Malfunction P1151 ETS Main Accel Position Sensor 2 Malfunction P1155 ETS Limp Home Valve P1159 Variable Intake Motor Malfunction P1171 Electronic Throttle System Open P1172 Electronic Throttle System Motor Current P1173 Electronic Throttle System Rationality Malfunction P1174 Electronic Throttle System #1 Close Malfunction P1175 Electronic Throttle System #2 Close Malfunction P1176 ETS Motor Open/Short #1 P1176 ETS Motor Open/Short #2 P1178 ETS Motor Battery Voltage Open P1330 Spark Timing Adjust Malfunction P1521 Power Steering Switch Malfunction P1607 Electronic Throttle System Communication Error P1614 Electronic Throttle System Module Malfunction P1632
Go to this page for generic codes that are for all OBD 2 systems

http://www.troublecodes.net/OBD2/Pcodes.shtml

Aug 29, 2008 | Hyundai Sonata Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

3,867 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Raygin
Raygin

Level 2 Expert

322 Answers

yadayada
yadayada

Level 3 Expert

64286 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...