Question about 1997 GMC Sierra

1 Answer

This is th second time since I owned the truck,the first time was still under warranty. My 99 gmc Sierra extcab pickup abs light came on had it scan and it show the the voltage was to low. ? dont know what it means or what should I do. Please avise. Thanks.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 2 Answers

Did you brake hard,skid somtimes the abs light will come on.disconnect the battery for 10 minutes.see if it happens again.

Posted on Jan 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turn off abs


Usually the ABS can be bypassed if you press the brake twice. The first time it activates ABS, then it bypasses it when you let off and brake a second time. Do this all the time in my 2004 when off road as I want to slide down hills with breaks locked.

Nov 19, 2013 | 2012 GMC Sierra 1500 Work Truck Regular...

1 Answer

Speedometer on my 2000 gmc Sierra is going haywire, along with ABS light on and transmission is shifting weird. All happened at the same time


Could be the speed sensor on the transmission.
Is the check engine light on ? Have you checked for trouble codes for the ABS ?

Jul 13, 2012 | 2000 GMC New Sierra 1500

1 Answer

Do you have to take the rear axle out to change th rear wheel seal on a 2000 two wheel drive GMC pickup?


Yes,the axle has to come out.Which means the rear end cover has to be removed.If your not familiar with this process you should not attempt it on your own or you could end up with bigger head aches.Hope this heaps.Good luck.

Feb 16, 2012 | 2000 GMC New Sierra 1500

1 Answer

ABS problem with GMC 2002 Sierra


its a low speed abs activation the problem is in the front sensors they need to be cleaned or replaced they [or one] probably has some corrosion on the sensor --[the 99 chevy tahoes had a limited recall over this issue and the fix was to remove and clean the abs sensor or if to corroded replace ] this problem doesnt set off an abs code or trouble light also sometimes the abs will activate by itself at under 4 mph without even touching brake

May 15, 2010 | 2002 GMC Sierra

2 Answers

2001 GMC SIERRA . ABS LIGHT STAYS ON


Wheel speed sensors misadjusted, damaged , or metal shavings and other debree, since they are magnetic can give false readings from one of the wheel circuits. Over sized tires can give of false speed readings as well. there are many other causes including bad relay, control module, e.t.c. It is best to have the proper scan tool to diagnose an ABS problem

Jul 08, 2009 | 2001 GMC Sierra Crew Cab

1 Answer

Cluster lights come on and off fuel needle and speedotemeter stop


you need to take down the dash,and your gonna have to take it out
and do some soldering change a few resisters stuff like that circuits
may even be oxidated

Jan 20, 2009 | 1995 GMC Sierra C1500

2 Answers

Tail light problems on 1996 GMC Sierra pickup


I had similar problem with my 97 sierra... I only lost 1 light, then brake lights stayed on all the time... turns out the "t" connector for the trailer harness under rear bumper was rotted inside...unplugged the 2 parts of the harness and pluged them into each other with out the "T" harness.... everything works great... Hope it helps ya

Jan 01, 2009 | 1996 GMC Sierra

Not finding what you are looking for?
1997 GMC Sierra Logo

Related Topics:

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...