Question about 2008 Buick Lucerne

1 Answer

CLUNKING IN STEERING WHEEL AT FULL STOP AND TAKEOFF.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Design issue with vehicle. redesign of i-shaft by nov or dec 08.
GM knows its the design of there vehicle.

R/R I-Shaft. See bulletin
TSB No.: 060235009
NHTSA No.: 10020815
TSB Date: June 1, 2007
Date Added to File: January 22, 2007
Failing Component:
Steering
Summary:
Power steering clunk, noise or rubbing feel while making turns at slow speeds, column, intermediate shaft, intermittent. Updated 08-15-07.

Posted on Aug 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

CLUNK IN STEERING SHAFT


Sounds like this vehicle may have had some suspension or accident damage. It needs to be put up on a lift, engine running while someone turns the steering wheel back and forth, a second technician under the vehicle inspecting for where the interference exists when the clunking happens. I don't recommend driving this vehicle.

Sep 25, 2015 | 2006 Hummer H3

1 Answer

Clunking in steering


ball joints on steering need replacing is my guess

Nov 11, 2013 | 2002 Ford Escort

1 Answer

Clunking noise when you turn the steering wheel while driving


The noise will be either the universal joint on the steering column or a component in the steering rack or outer tie rod ends, get someone to sit in the car and move the wheel slightly left and right and have a look and you will be able to see and hear where the noise is coming from

Mar 08, 2012 | 1998 Dodge Stratus

2 Answers

Everytime i turn the steering wheel i hear a loud clunking noise, i know its not the strut mounts, i know both tie rod ends are brand new within the past year plus they dont make a clunking noise like...


clunking noise may be bad steering rack. either the bolts that hold it to the frame may have worked loose,the center of your vehicle is where the steering racks located,just under the center of floorboard.under dash but on floorboard.make sense? try turning the steering wheel with engine running,place your hand under the radio,but on floorboard,when you turn the steering wheel from side to side,do you feel a thump? if so,then your steering racks loose or bad. the only way to know for sure is to have someone who knows about the steering rack to inspect it visually. thank you for choosing fixya.com

Apr 03, 2011 | 1997 Pontiac Sunfire

3 Answers

Power steering pump replaced, start to work ok, after 10 milles driving, steering wheel is hard, like pump is not working, under hood everything look ok.


YOU HAVE AIR IN THE POWER STEERING SYSTEM.YOU NEED TO BLEED POWER STEERING PUMP FIRST BEFORE DRIVING VECHICLE.CHECK POWER STEERING FLUID LEVEL ADD MORE POWER STEERING UNTIL REACH FULL COLD MARK..RAISE VECHICLE FRONT WHEELS OFF THE GROUND.START ENGINE LET IT IDLE WHILE TURNING STEERING WHEEL LEFT TO RIGHT NON STOP DONT LOCK OR STOP STEERING WHEEL KEEP TURNING IT SEVERAL TIMES CHECK POWER STEERING FLUID IF LOW ADD UNTIL YOU GET COLD MARK ON DIP STICK DONT OVER FILL POWER STEERING PUMP BLOW A SEAL.IF POWER STEERING FLUID LOOK TAN COLOR SYSTEM FULL OF AIR.TURN OFF IGNITION LET CAR SET FOR A WHILE CHECK FLUID LEVEL.IF STEERING WHEEL FEEL STIFF HARD TURNING DONT DRIVE CAR UNTIL YOU HAVE NORMAL STEERING.IF STILL HAVE AIR IN SYSTEM BLEED SYSTEM UNTIL AIR IS OUT.

Feb 25, 2011 | 2002 Chevrolet Avalanche

1 Answer

My 2006 ION steering makes clunking noise which


I have had that problem with my wifes car,i called a mobile repair guy to come out and tighten something in the steering column,cost me about $50

Dec 31, 2009 | 2005 Saturn ION

2 Answers

Clunking noise in front end on 02 Prius


check ball joints and tire rod first the clunking is a tati tale thet your ball joints are shot

May 26, 2009 | 2002 Toyota Prius

2 Answers

When turning steering wheel - either way, clunking sound.


Sounds like you have a bad CV joint, this will make a clunking or clicking noise like you described only when turning, and varies with vehicle speed.

Have it repaired before it breaks and leaves you stranded, or damages anything else.

Apr 02, 2009 | 2002 Cadillac Deville

Not finding what you are looking for?
Cars & Trucks Logo

948 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...