Question about Chrysler Sebring
There is a wound up ribbon conductor inside the hub of the steering called the clockspring, it has likely gone bad. It's a pretty common problem. Phone the dealer or your repair shop and ask them how much to replace the clockspring, this is probably not something you should do yourself.
Posted on Apr 05, 2009
Should be located close to the oil filter. It will screw in like a spark plug. It has a harness plug. Easy to change, save yourself $70 in labor. You will need a fairly large wrench to remove
Posted on Jan 03, 2010
why do you want your rpms higher while idling? you don't want them high because your gas bill will reflect that. slow shouldn't matter but if it's dying while on idle it could either be your mass air flow sensor or your fuel filter being clogged
Posted on Mar 23, 2010
Some of the Sebrings have two filters(one is called a sock).The sock(which all sebrings have) is located in the fuel tank itself on the pump module.If this model is the JXI then the external filter is located on the belly of the car between the tank and drivers rear seat. I hope I could help!!!
Posted on Apr 29, 2010
Tips for a great answer:
Dec 18, 2015 | 2007 Chrysler Sebring Sedan
Jan 05, 2014 | 2002 Chrysler Sebring
Aug 27, 2013 | 2004 Chrysler Sebring
Jun 30, 2012 | Chrysler Sebring Cars & Trucks
Sep 22, 2010 | 2004 Chrysler Sebring
Jun 27, 2010 | 2004 Chrysler Sebring
Jan 19, 2009 | 2004 Chrysler Sebring
Aug 15, 2008 | 2004 Chrysler Sebring
335 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: