None of the gauges work i checked the fuses they all work

There should be an instrument panel fuse in the fuse box located inside the car. Check the fuse and replace in needed.

Intermittent gauges usually mean a bad ground connection for the gauges. Things to check: look for multiple ground connections at one screw to chassis frame & tighten it; check large connector at rear of instrument cluster for good connection; replace gauges fuse - it can be cracked. If none of those work, than instrument cluster circuit board will probably have to be replaced - which means removing the cluster.

The gas gauge gets power from a 10amp fuse marked "meter" so if None of the gauges work check that fuse.

check the fuse box

If none of your gauges are working check the gauge fuse in the fuse box

check the fuses and fuse link wires by the battery pull the fuse link wire with your finger if it feels spongy or comes apart in your hand you need to replace it with a new fuse link wire

I would check with a Haynes (or equiv) manual. Probable fuse link from battery is out, a wire-type fuse "link". Check the fuse block, is there 12 volts coming in with key ign on? Does the truck start and run? Ignition switch is ok?

Have the computer checked

first start with the cheapest parts like the guage itself.may need replacing.if thats not it could possibly be a wiring problem.also check the float in the fuel tank.