Question about GMC C1500

1 Answer

I cant get the turn signals or hazzards to flash

Posted by on

  • lucasmorter Aug 04, 2008

    I FIGURED IT OUT I REWIRED IT ALL AND EVERY THING THEY WERE ON WHEN I HAD MY HEADLIGHTS SO I WENT TO THE PARTS STORE AND BOUGHT SOME NEW BULBS TO TRY AND THAT WAS THE PROBLEM THEY HAD REGULAR LIGHTS IN THERE AND I NEEDED A NEW FLASHER SOLENOID MAN I FELT STUPID WHEN I FIGURED THAT ONE OUT LOL

  • lucasmorter Aug 04, 2008

    thanks anyways jigsawbill



×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    MVP:

    An expert that gotĀ 5 achievements.

    Master:

    An expert who has achieved Level 3.

    Sergeant:

    An expert that hasĀ over 500 points.

  • Master
  • 398 Answers

Check the fuses first, they both operate on the same fuxe for most cars.

Posted on Aug 01, 2008

5 Suggested Answers

  • 634 Answers

SOURCE: turn signals dont work but hazzard lights do.

sounds like the directional switch maybe bad (lever on steering column ) if u open the column u can test the wires and see if it is passing current to tail lights have seen these go bad many times in older jeeps

Posted on Jul 08, 2009

iklln6
  • 35 Answers

SOURCE: turn signals don't work but hazzards do. where is the relayis lo

The turn signal flasher and hazard flasher should look identical. And they should be very near to each other. While they are working you need to put your head under the dash and listen to where the "blinking" is coming from. Even if you have to feel it!

Posted on Jul 15, 2009

  • 583 Answers

SOURCE: right turn signal is slow and left just stays on 1977 ford F100

wouldn`t hurt to have a look at the flasher unit, hazzard light are adifferent unit .you may even be able to see where it hasbeen getting hot------------ adios-ben

Posted on Aug 03, 2009

SOURCE: turn signals do not flash

Check your flasher unit is usualy located in the fuse box, round and silver.

Posted on Sep 14, 2009

emissionwiz
  • 60869 Answers

SOURCE: Turn signals come on but do not blink.

ARE THE FRONT AND REAR TURN SIGNAL INDICATOR BULBS ON STEADY AS WELL?

Posted on Sep 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turn signal and hazzards won't work; have checked fuse and is good.


Flasher been checked? Do lights come on, but no flashing, or nothing?

Apr 18, 2013 | 2003 Dodge Durango

1 Answer

Turn signal not working / has a short cant seem to find the sort


sounds strange, but does your hazzard lights work? If they do play with your switch wiggle etc while trying your turn signals. I have seen the hazzard light swith malfuction and cause this issue in the past. Good luck

Jan 04, 2013 | 1997 Nissan Pathfinder

1 Answer

I pushed the hazard light button and it push through and got stuck in the dash.so i pulled the fuse for them and they turned off so now i cant use my turn signals,is there a way to turn off the hazzards...


remove hazzard switch from dash, and unplug wires from switch, keep wires from touching each other w/ tape. blinkers should work. change out hazzard switch w/ new switch.

Sep 09, 2012 | 2000 Oldsmobile Alero

1 Answer

Hazzard lights flash when you turn the left hand signal on


You will need to replace the turn signal switch assmbly, it is defective, nothing else causes this problem.

Jan 24, 2012 | 2003 GMC Sierra

1 Answer

My turn signals don't work but the hazzards flash


if your hazzards flash, that means your bulbs will be good but, your turn signal fuse is blown. you should check that first, & don't forget to turn off your hazzards before you can see if your turn signals work again. give it a try.

Dec 01, 2011 | 2000 Dodge Caravan

2 Answers

My 2008 Chevy Cobalt coupe has a passenger side turn signal that flashes fast on the instrument panel. However, no turn bulb is burnt out in either the front or rear. The rear passenger turn blub just...


It is as simple as your hazzard switch needs to be replaced yes your hazzard switch as now turn signals are built threw the hazzard switch my PT Cruiser had same problem as my s10 replaced hazzard switch fixed the problem

Aug 18, 2011 | 2008 Chevrolet Cobalt

2 Answers

Where is the flasher located for signal lights,all lamps are ok. can manually flash on/off,but don't flash automatically.


Hazzard/Turn Signal Flasher (With Analog Instrument Cluster) On Convinience Center
Hazzard/Turn Signal Flasher (With Digital Instrument Cluster) On Instrument Panel Fuse Block
I personally call the "Convinience Center" the INCONVINIENT CENTER. You have to remove the entire lower end of the dash to get to it. (about 10 screws, 4or 5 push clips, and a bunch of wrestling) Then you will find it at the lower center of the dash.

Jan 05, 2011 | 1995 GMC Sonoma

1 Answer

Turn signals and hazzards dont flash how can i


Check the relay/fuse box, the relay that causes them to flash can go defective...the clicking you hear is the relay opening and closing to turn the lights on and off.

May 08, 2010 | 2004 Pontiac Grand Am

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...