- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It's pretty easy, you do not need to know the position, the wiper motor always return to it's origin, just activate the wiper motor by briefly using the washer fluid switch for instance, let it finish it's movement. Next, you want to place the wiper arm with the longest blade on the driver side. Now for the height, most car's wiper sit from 0.5 to 1 inch above the base of the windshield so that should be what you're aiming for, if the wiper arms pinion has splines, try to pick the one closest to the windshield but not too close of course and repeat the same steps for the passenger side. Now you should check the wiper arm operation for collision, incorrect height or travel distance and adjust the wiper arm position accordingly. By the way, if you're lucky your windshield may have mark on the base of the tinting of the windshield to indicate the height of the wiper blade
there are only two adjustment you can make on a hydraulic clutch set up and that is pedal hight and free play. To adjust pedal hight you rotate pedal stop bolt at top of pedal assembly to adjust the hight. To adjust freeplay you loosen the lock nut at the master cylinder pushrod and turn push rod in or out to the specified freeplay then you tighten everything back up
There will be adjustment screws located on at least two different spots surrounding each headlamp. By turning these screws you move the angle of the headlamp. Most shops will do this at a very resonable rate, I say this because improper headlamp angle may lead to a ticket, or at least a warning. To say the least, they have to be at specific angles and heights. Good luck.
hi buy a set of adjustable shock absorbers there are different types mechanical adjustment or pnumatic etc but these will allow you to adjust the the height you want less work more accurate yates210456