Question about Chevrolet Cavalier

1 Answer

Need to remove and repalce a 1999 chevy cavalier transmission

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,035 Answers

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 chevy cavalier transmission won't shift into


1999 cavelier manual trans: My son was shifting his manual trans really rough (ramming through the gears to try to beat someone out at a light) and ended up not being able to put it into anything but 3 and 4 (straight up and down). We noticed that the shifter cable, that actuates the position of the arm on the transmission, had pulled away from a "c" clip and was not held into place about 8-10 inches down the cable away from the trans. The cable needs to be secured into that clip in order to let the wire inside move the trans. lever to shift. Otherwise you will be stuck on what ever "rail" your trans is on at the time of disconnection. It would be the first thing that I would check.

Nov 22, 2011 | 1999 Chevrolet Cavalier

1 Answer

How do you remove axle shafts from transaxle on a 99 chevy cavalier is there a clip that needs removed first?


Put a prybar between the shaft and the transmission and try to pop it out, it has a circlip holding it in. You don't remove the clip, it compresses when the shaft pops out.

May 17, 2010 | 1999 Chevrolet Cavalier

1 Answer

A transmission in my 99 chevy cavalier is ' skipping'. what could possibly be the problem?


99 Chevy Cavalier is skipping ? Is you cavy a 2.2 LTR. ?
It may not be the tranny. It could be a spark or a fuel problem.
Need more explanation

Feb 01, 2010 | 1999 Chevrolet Cavalier

1 Answer

How to remove CV Axle from Manual Transmission on 2002 cavalier


the axle just pulls or snaps out of the trans, it is held in by an internal round spring clip, they are a real bear to remove the 1st time, u must pull straight out with a sharp jerking motion to get them to release, be patient it will come out.

Mar 31, 2009 | 2002 Chevrolet Cavalier Coupe

1 Answer

Dipstick


if it is the 2.2 L motor it is right in the front of the engine just about center.

now just incase your looking for tthe transmission dip stick, on certain transmission models there is no dip stick for the transmission. it is sealed.

Nov 21, 2008 | 1999 Chevrolet Cavalier

1 Answer

1999 chevy cavalier rally sport - Alternator?


It all depends on Motor size and if you have air conditioning.

Aug 02, 2008 | 1999 Chevrolet Cavalier

1 Answer

How to put front breaks on a 1999 chevy automatic cavalier


Place the bike on a stand, disconnect the cable, remove the wheel, set the wheel brake side up, use the bolt slightly inserted in the drum, or two oposing screw drivers around the drum to pull it from the wheel. Once pulled, remove the springs and shoes,lightly sand the inner drum on the wheel, install new pads and springs, spray both drums with brake clean, reassemble drums and wheel, install the wheel, and then adjust cable tension and brake pressure at first the wheel, and then at the bars. Test and readjust as needed.

Jun 17, 2008 | 1999 Chevrolet Cavalier

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...