Question about 2002 Pontiac Grand Am

1 Answer

2000 pontiac grand am

I have been having problem with my turn signals working. I changed out my hazard switch and they started working right. But then the next day they quit working again. I pulled it back out and was thinking that I might of blowed a fuse but all my fuse is still good.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

There are relays in the fuse box under the hood. Could be one of them.

Posted on Aug 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My turn signals sometimes will quit working then I have to hit the hazard lights button leave it on and then turn my turn signals on then they work what causes this to happen


When the turn signals quit working pull up , down , front to back an back to front on the turn signal switch handle . Do they work when doing this ? Pontiac had bad switch . The power for the turn signals goes through the flasher / hazard module . Could be the switch or the module.
The HAZARD LPS fuse in the left hand instrument panel (LH IP) junction block supplies battery positive voltage to the flasher module, which is part of the hazard switch assembly. The TURN LPS fuse in the LH IP junction block supplies ignition positive voltage to the flasher module. The turn signal lamps may only be activated with the ignition switch in the ON position. When the turn signal switch is placed in either the left or right position, current flow is from the flasher module's output to the turn signal switch assembly. The flasher module then sends an on-off voltage signal to either the left or right turn signals and their instrument panel cluster (IPC) indicator. When the hazard switch is pressed, all the turn signal lamps will flash including both IPC turn signal indicators.

Mar 12, 2016 | 2001 Pontiac Grand Am GT

1 Answer

2002 Pontiac Grand Am turn signals not working. Could this be a fuse?


None work , left , right , front or back ? Check TURN LPS fuse C 10 Amp -in Left instrument fuse panel ! More then likely it's the switch on the steering column or the hazard switch , power for turn signals come from the hazard switch !
Fuse Block - Left I/P- On the left side of the I/P

May 27, 2015 | 2002 Pontiac Grand Am

2 Answers

I have a 1995 grand prix Blinkers dont work but, other lights do.


First check turn signal fuse and relay if, they are good then try pressing on and off the hazard switch while turning the signal switch on.If signals start to work replace hazard switch.If hazard switch is good then replace turn signal switch.

May 02, 2011 | 1995 Pontiac Grand Prix

1 Answer

Turn siganl malfunctioning, already replaced the hazard switch and the turn signal module


had the same problem as you. I replaced the relay twice before it worked right. Just to test if it is the relay what I did was when the turn signal quit working I pushed the hazard button a few times then the turn signal started working again. Good Luck hope this helped

Jan 17, 2010 | 2004 Pontiac Grand Am

1 Answer

Where is the turn signal relay located in my 1999 pontiac grand am,,,,i already checked the fuses and the hazards work but no turn signals at all


the hazard button is the relay for both the turn signals and the hazards. you have to remove the trim panel that the hazard switch and radio are in pull it out of the back of that panel

Dec 28, 2009 | 1999 Pontiac Grand Am GT

1 Answer

Where is my turn signal switch or the flasher on


The turn signal switch is in the column, at the end of the turn signal lever. The flasher is integrated with the Hazard switch. The hazard/turn signal flasher is common to go bad.

Oct 28, 2009 | 2000 Pontiac Grand Am GT

3 Answers

Turn signals wont work fuses are good?


the hazard switch above the radio is your problem. if you put on your signals and they don't flash turn hazards on then off and they will flash. (changing this *** will fix your problem

Aug 30, 2009 | 1999 Pontiac Grand Am GT

3 Answers

Intermittant turn signal failure


THIS PROBLEM IS CAUSED BY THE FLASHER MODULE it is part of the Hazard switch. You have to replace the entire switch

Aug 06, 2009 | 2000 Pontiac Grand Am GT

2 Answers

Turn signals dont work


check the flasher and the fuse

Nov 17, 2008 | 2001 Pontiac Grand Am SE

Not finding what you are looking for?
Cars & Trucks Logo

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...