Question about 2002 Mazda MPV

1 Answer

Ignition key won't come out,only when power is off.

Posted by on

  • vaxquex1985 Aug 07, 2008

    the key wont go out and only goes out when i disconnect the battery

×

1 Answer

Had the same problem and never found the exact problem but did find a way around it. there is a small plug on the left side -inside of the steering column plastic, that controls the locking mechanism for the ignition (2 wire plug). if you unplug it, it de-energizes the lock and the key will turn. I think the problem is actually tied to a safety interlock on the transmission that looks for the vehicle to be in park before it will unlock the ignition lock. this keeps you from taking the key out while the vehicle is in gear.

Posted on Aug 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ignition of ford edge will not turn completely off..it is stuck in position 2 in auxillary power


1-
My ignition key will not turn to off. I can remove the key, but it stays in the accessory mode. What's the fix?
My ignition key will not turn to off can remove the key but it stays in...

2.
Ignition key is stuck and does not turn Inspection Service & Cost
Ignition key is stuck and does not turn Inspection Service Cost...

3.
Ignition key won turn

Aug 24, 2016 | 2012 Ford Edge

1 Answer

1998 dodgeram 1500 won,t start won,t turn over


check for power from the ignition in the start position to the starter relay/ solenoid terminal.

Jan 28, 2014 | 1997 Chrysler Town & Country

1 Answer

I replaced the ignition lock cylinder in my 92 cabriolet and I turned the key and it started first swing, then I was putting the steering wheel covers back on and it just turned off... When I try to turn...


If it's an automatic check fuse #15 wether it's a stick or automatic you should have power at the red & black wire coming out of your ignition switch when you turn key to start postion and power at the red wire going into switch at all times. if no power coming oit on the red/black wire you need an ignition switch. if there is power coming out of switch try putting car in nuetral (for auto trans). if still nothing you'll need to check for power at small wire going to starter when key is turned to start. if has power then need starter if no power you'll need to check starter interlock relay.

Dec 31, 2012 | Cars & Trucks

1 Answer

2003 range rover hse new battery won't hold charge and key is stuck in ignition


was the key stuck in the ignition before you change the battery? Is it the right key or it a fresh cut key

Dec 27, 2012 | 2003 Land Rover Range Rover

1 Answer

My 2008 silverado won't start battery is charged


No, it isn't an ignition issue.

Check power to the starter motor solenoid.
If this is getting power when cranking, then the issue is with the starter motor solenoid or starter motor. Replace.

Nov 12, 2012 | Cars & Trucks

1 Answer

1998 Plymouth grand voyager ignition won't turn


I have had this happen on my 98 Voyager. Just have a new key cut. This new key will sometimes cure the problem. The older keys get worn out and won't unlock the ignition. Try this before a much more expensive and time consuming change of the ignition.

Nov 01, 2011 | 1998 Plymouth Voyager

1 Answer

My key wont turn to off in order to remove my key from ignition while in parking


Ignition - Key Stuck In Ignition Switch/Won't Turn Bulletin No.: 06-02-35-005 Date: February 28, 2006 TECHNICAL Subject: Key Stuck in Ignition, Key Will Not Return to Off Position, Shifter Button Won't Release in Park Position (Adjust Shifter Detent Finger) Models: 2002-2005 Chevrolet Monte Carlo Condition Customers may comment on any of the following conditions: - The key is stuck in the ignition cylinder. - They cannot return the key to the off position to remove the key. - The shifter button won't release in the park position. Cause This condition may be caused by the detent finger shifting over time. This may result in mis-alignment and binding of the shift rod on the shift position guide.
WHERE YOUR SHIFTER IS YOU WILL HAVE TO TAKE IT APART ..MAYBE THE RUBBER BOOT IS IT THE WAY,OR THE SHIFT LOCK SELINOID WHENT BAD

Aug 05, 2011 | 2005 Chevrolet Monte Carlo

1 Answer

1997 pontiac grand prix key won t turn ignition


well does the key go in does it turn to the start pos? if the dash dost power up its because the switch is bad if it will power up but not start it can be becuse of the resitor chip depends on what is going on if you cant get power its becuse of the switch

May 06, 2010 | 1997 Pontiac Grand Prix

1 Answer

Ignition key won t turn. steering wheel locked


the key may be worn badly or the ignition needs to be replaced.

Jul 31, 2009 | 2004 Saturn VUE

Not finding what you are looking for?
2002 Mazda MPV Logo

Related Topics:

242 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...