Question about 2006 Pontiac G6

1 Answer

Can not turn off hazard lights, pulled every fuse I could find but nothing helped.

Posted by on

1 Answer

The microswitch that is used to actuate the contact points for the system, or the one you push to activate hazard lights may have slipped off its bracket, (replace the switch)

Posted on Jul 31, 2008

6 Suggested Answers

  • 166 Answers

SOURCE: Tiburon 04, left turn signal lights stay on

replace the turn signal 'Clicker' also known as the turn signal relay. Most likely the problem unless you have a really wierd electical issue that will be hard to isolate...

Peace,

Posted on Mar 03, 2010

wilsodfarm
  • 986 Answers

SOURCE: 1998 Dodge 2500 pickup turn signals, hazards

There is a conector box on the left side of your steering wheel on the colum loosen it and check your wires I bet when you just loosen the block they will start working,I hope this helps you

Posted on Oct 08, 2009

blueextc3221
  • 15935 Answers

SOURCE: need a fuse diagram for a 96 mercury cogar xr7

CLICK HERE for your owners manual.

Fuse layout is on page 269

Thanks for using Fixya - a FixYa rating is appreciated!!

Posted on Jan 31, 2009

HondaAl
  • 72 Answers

SOURCE: turn signals and hazards dont turn on

The turn signals run through the hazard switch, I have replaced hazard switches for this problem.

Posted on Apr 23, 2009

shagsta
  • 72 Answers

SOURCE: the hazard lights start flashing and I can't turn

there must be alarm fitted that either has the siren disconnected or turned off. Basically sensing an intrusion alert or voltage drop. Flip out the hazard switch, there will be a wire which runs seperate from the body loom into this light, just cut it, the correct one though. if needs be trace it back.....probably end up behind the glove box

Posted on Oct 16, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The emergency flashers won't turn off.


The problem, I suspect, will be with the switch unit for the Hazard lights which will need to be replaced.

In the meantime check your fuses. In some vehicles there is a fuse dedicated solely to the hazard light circuit so if you pull that fuse out the Hazard lights will not operate and nothing else will be affected. I cannot say if that is the configuration used in your car but a check of your owners manual , or if there is a fuse diagram on the inside of the fuse boxes on your car, you can identify which fuse is for which function or functions..

Jan 11, 2016 | 1998 BMW 323 Ci

1 Answer

How do I turn off the hazard lights on 09 Cadillac STS when the hazard button is stuck?


there is a recall on the GM light system so check it out . The hazard light switch basically just connects both side indicators together. For a short term fix see if you can pull the connector of the back of the switch.

Dec 24, 2014 | 2009 Cadillac STS

2 Answers

Chrysler Vision hazard light


on some of these models, the hazard switch operates through its own flasher fuse. if this is the case, locating and replacing the fuse ($4) should do it. Location should be in the owners manual.

Nov 10, 2013 | 1997 Chrysler LHS

1 Answer

Turn signal not working, replaced fuse in fuse box underdash and still nothing


Pull the panel with the hazard lights button, and make sure that connection is made. The way it's wired up if the hazard button isn't connected nothing will work. I had the same problem

Dec 16, 2012 | 1996 Geo Prizm

1 Answer

I have a 1998 Chevy Z71 and I broke my hazard light button. My hazard lights won't go off so I had to pull the fuse out but now I don't have brake lights or turn signal lights. What should I do?


Pull the wires off the back of your hazard button ,isolate them with tape or terminal block until you replace your broken hazard button. Replace the fuse you took out.

Nov 10, 2012 | Cars & Trucks

2 Answers

Ok i don't know about much about cars but i know


sounds like the signal switch relay fuse. turn your signal on and check your fuse boxes... inside the car and under the hood. it will look like a little square box inside your fuse box next to your other fuses. with your signal on, you should be able to locate the relay because it will be making a clicking noise. pull it straight out and go get another one. hope this helps.

Nov 03, 2012 | Cars & Trucks

3 Answers

Hazard flashers do not work. Turn signals do. Changed relay. Nothing. Ugh. 1992 oldsmobile cutlass supreme


You changed the hazard flasher or the turn signal flasher? It has two, one for the hazard and one for the turn signals

Aug 31, 2009 | 1992 Oldsmobile Cutlass Supreme

1 Answer

Turn signals and hazards dont turn on


The turn signals run through the hazard switch, I have replaced hazard switches for this problem.

Apr 22, 2009 | 1996 Honda Accord

1 Answer

YJ Blinker Relay


Hi there,

Both the hazard and the blinker flashers are located on the fuse panel. They pull straight out.

When both turn signals fail, the cause may be a blown fuse, a faulty flasher, a broken turn signal switch or a bad connection.

When you try the turn signals, do they light up and not blink?
-If so, probably the flasher unit.

When you try the turn signals, does nothing happen?
-Check the fuse

Let me know if the problem continues after replacing the flasher.

Mike

Aug 30, 2008 | 1988 Jeep Wrangler

Not finding what you are looking for?
2006 Pontiac G6 Logo

Related Topics:

563 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6876 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...