Question about Mazda 626

Open Question

Transaxle is making a scraping, grinding noise.I have a 1989 Mazda 626 ,manual trans,turbo.Should I try to fix or replace it?

Posted by on

1 Suggested Answer

  • 118 Answers

SOURCE: 2002 Mazda 626 clip on end of transaxle fell off and is grinding

you could pop the axle out and get a flexible magnet hopefully it is in a place the magnet can get to,have a good day DB

Posted on Feb 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Popping rattling noise in front slipping and leaking tranny


Rebuild the transaxle & check the CV Axle Joints for problems,
as well as replace all motor & trans mounts

May 10, 2014 | 1996 Mazda 626

1 Answer

Need vacuum valve connection diagram for 89 mazda 626


Confirm us 1989 Mazda 626 4 Cylinders 2.2L FI or 4 Cylinders 2.2L FI Turbo

If you have any other questions or need that we send you this diagram, please feel free to get back to CONTACT US HERE.

Also keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using Fixya, and have a nice day.

Oct 28, 2011 | 1989 Mazda 626

1 Answer

Lack of power in Mazda 626 RF 74ps (100 bhp), can I check and repair the turbo myself, I think the by-pass v/v might be open, any ideas please? Peter


CHECK TO MAKE SURE BYPASS VALVE GETTING VACCUM TO CLOSE TO INCREASE BOOST TO ROUTE MORE AIR TO INTAKE MANIFOLD.IF BYPASS VALVE IS GETTING VACUUM AND CLOSING.PROBLEM COULD BE CLOGGED FUEL FILTER OR PLUGGED EXHAUST SYSTEM.IF SUPERCHARGER ITSELF WAS BAD YOU WOULD HEAR NOISES FROM WORN ROTOR BLADES HITTING OR ROTOR BEARING NOISES.

Jul 21, 2011 | 1999 Mazda 626

1 Answer

I'm replacing half shafts on 94 mazda 626 w/auto trans. Front end is off ground and supported. After removing drivers side axle shaft, I replaced it with a new one and while installing it turned it a...


Your okey
You have to turn the new axle
after you install it to check it out

The other side is going to turn,
if it didn't ,you wouldn't have the
replacement axle even in the
transaxle

Mar 22, 2011 | 1994 Mazda 626

1 Answer

Had the auto- trans rebuilt in my 01 626 4 cyl. mazda, now it has a bad vibration no one can find the problem, I'm thinking tourqe convert. but I have never removed a front wheel drive trans. Need info on...


Having years ago,owned a trans repair business,I will tell
you, that you don't want to consider removing any trans axle
in your driveway. You need a lift

I would go to a trans only repair shop and get involved
I my shop we took the customer into the shop and educated
them and were honest. So,make sure your in there and involved
and they can prove what your issues are.
They love rebuilding them,that is what they do
You need a solution to your issues

I would suspect engine misfires etc,motor and transaxle mounts,
bad drive axle joints

Dec 03, 2010 | 2001 Mazda 626

1 Answer

How do i fix a clutch on a 89 mazda 626 lx


you have it replaced, or you replace it yourself. long involved procedure and you are going to need a repair manual which no one is going to print for you. so go buy yourself one on ebay for about 10 bucks.

Nov 22, 2010 | 1989 Mazda 626

2 Answers

WHY IS MY CAR JUMPING OUT OF FIFTH GEAR? I HAS BEEN RUNNING OKAY NO NOISE . 1993 MAZDA 626 5 SPEED 4 CYLINDERS


A synchronizer for 5th gear is bad,needs to be replaced,the transmission needs to be removed ,and repaired.

May 04, 2010 | 1993 Mazda 626

1 Answer

2002 Mazda 626 clip on end of transaxle fell off and is grinding


you could pop the axle out and get a flexible magnet hopefully it is in a place the magnet can get to,have a good day DB

Feb 04, 2009 | 2002 Mazda Tribute

2 Answers

Mazda 626 2.2L Turbo 1989 - Alternator - Fuel Pump


Hi am just up the road on the SSC, it is easier to remove the alternator from underneath the vehicle & if you look under the carpet under the rear seat there is a plate which gives you access to the fuel pump cover in the tank. The pump can be accessed from there. If you want the workshop Manuals I have just uploaded them.
You can download the GD 626 Workshop manual & the Turbo supplement by going to the 626.net site.
Cheers

Jan 15, 2009 | 1988 Mazda 626 Turbo

1 Answer

1989 mazda 626 turbo window washer pumps


well the pump for the washer solvent is probably fried (unless there is no solvent in the resovoir). and on the gas gauge the way that works is there is a little float handle that goes up and down with the gas. when you put gas in this little float floats on top of the gas and this is how your car knows how much gas you have it sounds like it is getting stuck and will probably need to be replaced

Sep 24, 2008 | 1989 Mazda 626

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...