Question about 1994 Jeep Cherokee Country

1 Answer

No power to ignition

Turn on key nothing happens but battery is good

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 373 Answers

Hi...
I recomend. If you say the battery is good and Full charged.
First, check the Battery terminal for corrotion or Misscontact.
Clean AS need.
Check all the fuses, include a fuse links.
With a TEST light, check for power at the IGNITION switch.
The switch use 12v. at 1 of the wires.
And when you turn the Switch the rest will have 12v except 1.
if you found power going but not the other ones when you turn. the switch.
Just REPLACE the ignition switch.
But if you can't do this step, I recomend call some mechanic.
because the Electrical System is alittle complicated.

OK.... I hope this help on your problem.
Thank you for use fixya.

Posted on Jul 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When turn key nothing happens


check connection and wires at battery for damage or corrosion if good check for power to ignition switch if no power check for damaged or shorted wiring if good turn key and check if power going to relays or accessory's at fuse panel if no power switch may be bad

Apr 08, 2014 | 2002 Saturn S-Series

1 Answer

2004 Pontiac Aztec won't start the battery was tested its good the starter was tested its good turn the ignition key and nothing happens what else could it be


check for power to the starter solenoid from the ignition switch. IT is the light wire that goes to a terminal on the solenoid between the two large nuts.. If there is no power there then work back to an IGN fusible link next to the battery

Feb 20, 2014 | Cars & Trucks

1 Answer

Car ignition will turn to start but nothing happens


Dead battery or broken ignition switch possibly

Mar 23, 2013 | 2005 Jeep Liberty

1 Answer

92 plymouth voyager wont start and nothing work the windows wont go down the lock and unlock button does nothing idk what the problem is i had the battery tested and the battery is fine what would cause...


Nothing works? How about the headlights, do they work? If yes, then start checking all fuses in the Power Distribution Center or Box under the hood. If no, then look for a bad maxi-fuse in the PDC, and check for a bad fusible link between the battery and the PDC. The battery positive cable goes to the starter, but a pigtail lead off the positive would go to the PDC, to distribute power to all the various circuits on the car.
When you turn the key to on, does the dash light up? If yes, at least power is getting to, and going through the ignition switch. One could then check for power on the starter solenoid wire when key was held in crank or start position.
If nothing when turning key to on-no dash lights, nothing-then check for an ignition fuse in the PDC. If fuse is good check for power being available at the ignition switch connector. If no power there, check wiring between PDC and the ignition switch-if power is up to the switch, but nothing happens with key on, no dash or warning lights, then could have a bad ignition switch.
It just sounds like a maxi-fuse has blown, or a bad fusible link. Good luck.

Mar 18, 2013 | Cars & Trucks

1 Answer

No power to truck, key locked in ignition


Is the battery dead? try charger, battery is okay but when you turn key nothing happens and key is jammed? Key won't turn? not much information you provided, but if key not working and battery is good sounds like the ignition cylinder has failed and needs replacing, i would not recommend for a novice as dis-assembly is and reassembly is not easy and requires a few special tools and if mistakes are made could attivate air bag, deactivate air bag or short electronic components

Jun 09, 2012 | 2005 Chevrolet Blazer

3 Answers

2009 HHR won't start. Battery is good.


Is the security light on or blinking?If not then do you have power to the starter.You can check this with a test light.You should have power when you turn the key to start.The test light should light up.Should be the small wire.I believe it is purple in color.If the security light is on then you will have to get the codes to see what is causing the no start.Hope this helps.Good luck.

Dec 07, 2011 | 2009 Chevrolet HHR

1 Answer

1988 Doge Ram will not turn over.


check your starter relay in the power distribution center. if you are not getting any crank. with a test light or dvom you can check the small signal wire on your starter solenoid when the key is in the crank position there should be power on this wire. it sounds like you are not getting signal to the starter from the ignition switch

Apr 16, 2009 | 1988 Dodge Ram 50

1 Answer

Does not start


Make sure you battery is fully charged, and make sure that your alternator hasnt went south...

Battery or Alternator could be junk...

Aug 11, 2008 | 2002 Ford Taurus

Not finding what you are looking for?
1994 Jeep Cherokee Country Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...