Question about Ford Contour

2 Answers

Turn signal flasher needs replacing - Contour Ford Cars & Trucks

Posted by on

  • 4 more comments 
  • Anonymous Oct 26, 2008

    How do your the rear turn signal light shield to replace the turn signal

  • jhd2176 Dec 30, 2008

    I can't find the turn signal flasher! There is one flasher but it seems to be only fr te hazards. How could I find the turn signal flasher?



    John Harms, Canada, jhd@telus.net

  • Jim willyard Feb 10, 2009

    where is the turn sinal flasher

  • Jim willyard Feb 10, 2009

    turn signals and hazard flashers dont work

  • strawberrie Feb 25, 2009

    how do i change my turn signal lights both in the front and the rear?

  • nmilevski Mar 25, 2009

    turn signal flasher needs replacing

    Where is it on a Ford Expedition

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Where is the turn signel flasher on a 1995 ford taurus

Posted on Jan 10, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Where is the turn sinal flasher

Posted on Sep 23, 2010

6 Suggested Answers

fixincars
  • 335 Answers

SOURCE: Turn Signal Flasher

58940048Its behind the center of the dash under the Ashtray U need TORX screwdrivers to take out the screws got to take off nearly all over the under dash plastic trim.
Contact me if you need more help Thanks

Posted on Jul 31, 2008

emissionwiz
  • 61037 Answers

SOURCE: Where is the turn signal flasher located on a 2002 Sunfire?

It is located Front seating area, driver side, under dash, mounted on top of brake pedal.

Posted on Sep 22, 2008

  • 1779 Answers

SOURCE: I need to replace the turn signal flasher but can't locate it.

It's located under the dash, driver side, on steering column.

Posted on Apr 15, 2009

  • 1 Answer

SOURCE: turn indicator sound (ticking) continues after signal is cancelled. replaced flasher and sound continues.

Remove the signal lever (switch) clean the grease completely and lube again with di-electric grease.
This should solve your problem.

Posted on May 30, 2009

  • 1 Answer

SOURCE: can't find the flasher under the dash

The flasher is located under the dash on the steering column on the left hand side. Pull off the plastic cover and you will see it clipped to the column--left.

Posted on Nov 19, 2009

  • 1 Answer

SOURCE: turn signals hazards flasher don't work jeep

I NEED TO LOCATE THE SWITCH WHERE IS IT ?
MY INDICATORS NOR HAZARD LIGHTS ARE WORKING I DONT KNOW WHAT IS WRONG WITH IT CHANGED BULBS BUT NOTHIGN THEY ALL WENT OUT AT THE SAME TIME
SO THERE MUST BE A RELAY SWITCH SOMEWHER BUT DONT KNOW WHERE ?
THANKS FOR HELPING

Posted on Apr 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turn lights blink with hazards but not with turn signal..flasher replaced. is It the multifunction lever then??


There should be a turn signal flasher and a hazard flasher. They are two different parts. If you replaced the hazard flasher and not the turn signal flasher than I would start by replacing the turn signal flasher.

One thing you can do once you find the turn signal flasher is to unplug it and use a jumper wire between the two pins of the connector then turn the key to the run position and place the turn signal lever in the left or right position. If the turn signal lights know light up than the turn signal flasher is the problem

Sep 09, 2014 | 1997 Oldsmobile Cutlass Supreme

1 Answer

Need to replace turn singal flasher on a 2006 hyundai tucson. auto


turn 4 way flashers on and listen for the clicking noise...turn signals should be next to the flasher relay..in some cases they use the same one..if a light is out, check and replace it..

Feb 09, 2013 | Cars & Trucks

2 Answers

Have a 1988 Jeep Wagoneer with a few issues. My turn signals no longer blink or flash that I know of..?


Okay, the first thing to check is to turn on the signal on one side and see if the outside signal light comes on. if the light comes on then try replacing the flasher. Also see if your 4way flashers work or if they are also out. if they are out then check your fuse first.
If the fuses are good then try the flasher, if the flasher does not solve the problem then you may need to replace the turn signal switch. I have worked on a few of these and most of the time it was a flasher or the turn signal switch. good day.

Mar 02, 2012 | 1988 Jeep Cherokee

1 Answer

Don't have turn signals and its not my fuzes.


Look under the left side of the dashboard for a turn signal flasher. Most vehicles have two flashers; one for the turn signals and one for the hazard lights. If your hazard lights are working, follow the "ticking" sound...this is NOT the flasher that needs replacing. Look for the other flasher and replace it.

Apr 09, 2011 | Hyundai Tiburon Cars & Trucks

1 Answer

Turn signals were working...but blinking fast. now they don't work at all...replaced fuse in side panel near door and still nothing. Everything else works..headlights, wipers, hazards..what gives?


you have a separate flasher for the turn signals.this is what your problem sounds like.if all your lights are working including the signal indicator on the dash then it will be the signal flasher.if you turn on the hazard flashers and locate it under the dash, this will show you what the turn signal flasher will look like.then you will have to look for the flasher unit on the fuse panel that looks like the hazard flasher.replace the turn signal flasher and you will have your signal flashers again

Mar 08, 2011 | 1996 Dodge Ram 1500 Club Cab

2 Answers

My passenger side turn signal blinks double time, what do i need to do to fix it?


Check that the bulbs are lighting and if they don't replace as needed. If they are fine the turn signal flasher is bad. Replace the flasher and the problem is fixed. If you have to replace the flasher the easy way to find it is turn your turn signal on on listen for the clicking . Find the clicking and you found your flasher.

Nov 08, 2009 | 2002 Volkswagen Passat

1 Answer

2000 Intrepid turn signals stopped working, I replace the flasher relay, still turn signals not working?


did you replace the turn signal flasher or the emergency flasher? turn on the emergency flasher lights and pull that flasher if they quit working you changed the wrong one.

Jun 25, 2009 | 2000 Dodge Intrepid

3 Answers

Turn signals


replaced turn signal flashers and muti switch turn signal still won't work Why?

Nov 08, 2008 | 2000 Jeep Grand Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

2,887 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...