Question about Chevrolet Corsica

1 Answer

Remove and replace waterpump 1995 3.1 V6 - Corsica Chevrolet Cars & Trucks

Posted by on

  • Anonymous Oct 12, 2008

    how do you change water pump for a 2002 chevy 1500 2wd 3.4 liter truck. Having problem removing fan from pump. please help

  • snyd3r88
    snyd3r88 Oct 12, 2008

    I have a 1999 chevy 4x4 with 4.3 V6. How do I remove fan clutch and fan?

    I am replacing waterpump.

    Thanks

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chevrolet Master
  • 61,292 Answers

3.1 V6's are not hard to do. If you stand infront of the car on the passanger side follow bottom radiator hose that is the water pump. There are 4 or 5 bolts holding the pully on do not take belt off yet. Break looses the bolt's first. Pull the pully off there will be at least 4 bolts holding the housing on remove them you will loose about a glass of water. Pull the old water pump out and put new one in make sure you use blue silicone or something similar for water put silicone on water pump make sure holes line up on the gasket when you put it on the pump let sit for 5 min. put silicone on other side of gasket put it right one don't let site reassemble everything and your good to go.

Posted on Jul 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Water pump installation


Take off belts. Then remove covers. Hold timing belt on the cams with Vise grips. Remove waterpump. This is for a 3.5L V6

May 26, 2012 | 1995 Dodge Intrepid

1 Answer

I am trying to replace the water pump om my 1995 Mercedes C220 (Not a C230) How do I get the tensioner pulley to release the tension off the water pump pulley and serpentine belt so I can remove the fan...


TRY USING A BOX END WRENCH OR A SOCKET AND WRENCN TURN TENSIONER CENTER BOLT COUNTERCLOCK WISE TO UNLOAD TENSION WHILE SLIP BELT OFF THE ALTERNATOR.THAT WAY BELT WILL BE OUT THE WAY UNTIL YOU REPLACE WATER PUMP.WHEN DONE TURN TENSIONER CLOCKWISE WHILE SLIP DRIVE BELT BACK OVER THE ALTERNATOR.

Feb 19, 2011 | Mercedes-Benz C230 Cars & Trucks

1 Answer

Got a 1995 mustang with 3.8 v6 need to know where heater hoses go to from firewall to engine!maybe a diagram would help


one goes to waterpump other one goes to intake . more than likely one hose will be longer than the other.

Nov 12, 2010 | Ford Mustang Cars & Trucks

1 Answer

Leaking waterpump


that would depend on the tools you have available to you, right tools, reasonably easy, wrong tools, very hard

Jun 10, 2010 | 1995 Pontiac Firebird

1 Answer

Leaking antifreeze


Yes I think this is the obvious one here. It could also be a core plug weeping, but unlikely unless you've been using water instead of coolant.

Get a couple of quotes for waterpump AND timing belt replacement - as the belt usually has to come off anyway.

Feb 07, 2010 | 1995 Chevrolet Lumina

2 Answers

Is it difficult to replace the waterpump housing on a 1995 with a 4.6?


Its a little involved, and take a mechanic that knows what hes doing 4.5 hours

Jan 19, 2010 | 1995 Cadillac DeVille

1 Answer

How to install a waterpump on a 1995 ford contour


AS A FORMER FORD TECH I HAVE TO ASK HOW MUCH PAIN CAN YOU STAND?
THE V6 WATER PUMP IS VERY HARD TO REMOVE WITH OUT THE RIGHT TOOLS, IT MAY NOT LOOK IT BUT IT IS.
BUT IF YOU REALY WANT TO DO IT YOR SELF I WOULD SUGGEST BUYING THE HAYES MANUAL. IT WILL HAVE PICTURES TO SHOW YOU WHAT YOU WILL NEED TO TAKE OFF. THAT AND A FIRST AID KIT.

Nov 23, 2009 | 1995 Ford Contour

2 Answers

Waterpump failure. Rattling and water leaking. Do I just replace waterpump, or do I go all out and replace cambelt and tensioners, timers, seals etc


I'm not sure about Audi 80's, but on A4's you have to pull the whole front of the car off (bumper, headlights, radiators, radiator support panel - the a/c radiator just moves out of the way thanks to long rubber hoses, so not discharge/recharge necessary), but then you get fantastic access and it's really not that hard a job (an hour give or take).
If you are going this far, do the timing belt, thermostat and accessary belts. For an extra $100 in parts, you only pay about another 30 mins labour. And if you're doing it yourself - well, you're there anyway!
If getting done professionally, go to a VW/Audi specialist as they will have the specialist tools necessary for the job - a regular garage WILL NOT!!

May 04, 2009 | 1992 Audi 80

1 Answer

Water pumop removal


Yes u do, also lift the engine for easier access on that side if you have a floor jack, careful not to damage the pan..

Mar 19, 2009 | 1995 Buick LeSabre

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

285 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61292 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...