Question about Oldsmobile 98

1 Answer

Horn wil blow every now and then,but when i use the tilt to lower the steeering wheel to the lowest it will blow whats wrong here.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 21 Answers

From what you are tellin me there is either a bad connection with the wires with horn or there is a short somewhere in the wiring of the vehicle if there is and where you think there is bad connection takes a volt tester and see if you are getting voltage up to there if notthere is bad connction somewheres else along you jus have to search

Posted on Jul 30, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do you virtically raise the steering wheel in hino rainbow bus


talk with a service center as many vehicle only allow for an up/down ( tilt) position of the wheel
you may be requiring the wheel to move in or out closer to the driver

Dec 10, 2016 | Cars & Trucks

2 Answers

My horn sounds off and won't stop 'til I disconnect battery cable. Why?


sounds like there's a short in your wiring in the steering column, A lot of times with a tilt wheel a wire get loose or gets a short in it. the steering wheel may have to come off to fix the problem but make sure to disconnect the airbag first, I'm not sure what vehicle you have so I don't know where to tell you to look for the connection, may be best to take to a dealership if possible. Hope this helps.

Jan 18, 2013 | 2002 Mitsubishi Lancer

1 Answer

03 Town and country, sometimes it wil start and die, if i move the tilt wheel postion, and sometimes it wont stat at all, unless i move my tilt wheel, whats the problem?


There has to be a short in one of the wires or one of them are almost completly broken. When you tilt your wheel its probally makeing contack and isint when you dont tilt your steering wheel

May 30, 2012 | Cars & Trucks

2 Answers

2004 LINCOLN LS HORN BLOWS WHEN USING THE TILT WHEEL


You have a wire that is rubbed bear inside the steering column, pull the covers and inspect the harness. Disconnect the battery negative cable for 10 minutes before you start work to disarm the Airbags

Feb 16, 2012 | Lincoln LS Cars & Trucks

1 Answer

I have a 1994 Honda, with automatic trans. The horn/brake lights don't work, when we replace the 20A fuse, the horns beeps and fuse blows. We tried disconnecting the horn in the steering wheel but didn't...


Well, in the front of the car, lower front bumper I mean where your lower vent grill are, there is this circle metaliic thing, probraly kinda rusted. That is the horn, and what you can do is disconnect the wiring harness there, if not, and you don't really need a horn anymore, you can just cut the wire.

Jan 30, 2011 | 1994 Honda Accord

1 Answer

Click or popping noise when turning left or right when taking off. also horn stuck it blows by itself, i think it could be haunted. lol need help please


nose in front is needs axles checked and replaced ....horn is probally a problem in steering colom....wire grounding out working the tilt wheel up and down might help tell....hope it helps

Nov 16, 2010 | 2005 Pontiac Grand Am

1 Answer

Horn quit working on 94 gmc sierra


check at horn to see if you have power if not check fuse if you do replace horn. some one will have to push on steeer wheel horn button while horn is tested.

Jan 07, 2010 | 1994 GMC Sierra

1 Answer

Wobbly tilt wheel


Remove horn pad . After removing the large nut SCRIBE A LINE ON THE CENTER SHAFT and the STEERING WHEEL, Using a steering wheel puller, remove steering wheel. Now comes the tricky part. Remove signal stalk ( just pull out a couple of inches ),and 4-way flasher knob. Disconnect multiple connector of signal switch. Remove 3 screws holing switch down. Gently pull upward on switch to expose lower steering bowl. The large bolts are LOOSE that secure it, so the reason for the wobble. Tighten bolts, and reverse procedure.

Mar 31, 2009 | Oldsmobile 88 Cars & Trucks

1 Answer

The horn keeps going off what could be wrong


It could be the horn switch on the steering column. Disconnect the harness coming from the steering column at the bottom when the horn is blowing, if that stops the horn then the problem is the switch below the steering wheel

Jan 03, 2009 | 2004 Dodge Ram 1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6876 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...