Question about 1989 Honda Prelude

1 Answer

1989 honda prelude

How to remove ,install alternater

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

If you are somewhat mechanically inclined you should be able to follow these steps in order I put them. #1 Disconnect the negative battery terminal.#2 Disconnect the electrical terminals from the alternator.#3 Loosen the alternator adjustment and pivot bolts and remove the belt.#4 Remove the bolts and separate the alternator from the engine.#5 Remove the alternator bracket from engine.#6 Remove the fuel filter and any of the vacuum lines in the way.#7 Remove alternator from top of the car.#8 Installation is reverse of removal.

Posted on Aug 06, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Looking for a map sensor for my honda prelude si 2.0 1987.


Rock Auto.Com --- on internet

$129.79 for standard
$206.79 for wells brand

You need to know that is the problem

You install yourself in about 5 min
Don't need a repair shop

Sep 30, 2012 | 1989 Honda Prelude

1 Answer

Vacuum hose diagram for 89 honda prelude


Hi there:
I suggest check this links, according with the fuel system:
- Fig. 62: Vacuum hose routing-1989 carbureted Prelude (except California)
- Fig. 63: Vacuum hose routing-1989 carbureted Prelude (California)
- Fig. 64: Emission component schematic-1989 carbureted Prelude
- Fig. 65: Vacuum hose routing-1989 fuel injected Prelude


Hope this helps; also keep in mind that your feedback is important and I will appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Dec 21, 2011 | 1989 Honda Prelude

1 Answer

How do you remove the distributor on a honda 1989 prelude


Disconnect wire connector plugs,remove three 12 mm bolts,the distributor will then slide out.The drive tab is offset,so will only go in one way.

Sep 04, 2011 | 1989 Honda Prelude

1 Answer

I have a 89 honda prelude turns over but no fire from the coil


My honda prelude 1989 runs speed and later it will be slow and cannot run again.

Sep 02, 2011 | 1989 Honda Prelude

2 Answers

1989 Honda Prelude Si 4WS; 2.0 DOHC - How do I change the O2 sensors on the manifold?


simply unplug and use a 7/8 wrench and a lot of muscle use a small amount of anti seize during installation.

Feb 18, 2011 | 1989 Honda Prelude

2 Answers

Where is the location of the fuel pump relay on a 1989 honda prelude ?


in the fuse panel under hood its marker fuel pump relay

Dec 28, 2010 | 1989 Honda Prelude

1 Answer

Replacement of Alternator on 1989 Honda Prelude


Very difficult indeed. Try 1/4 drive ratchet or 12mm box end wrench--bottom bolt goes through the adjuster-really can't see it-slow go but do able

Feb 05, 2010 | 1989 Honda Prelude

1 Answer

1989 honda prelude. engine surges. from normal to 2100 rpms


There is a warm up valve on the throttle body(should have 2 small coolant hoses). remove the valve and have someone start the car while you block the port to the valve on the intake. If that clears up the problem you can cut a piece of cardboard to mount in between the valve and intake.should straighten it out.

Oct 01, 2009 | 1989 Honda Prelude

1 Answer

Charge problems


Appeats voltage regulator ha a plroem, but, check battery wwater level before replacin battery or alternater.

May 27, 2009 | 1989 Honda Prelude

1 Answer

Honda Prelude 1989


well, there has to be a leak somewhere, broski.

Because you wouldn't be smelling fuel inside the car if there weren't.

I'd look somewhere around the fuel pump housing and work my way to the front of the car, personally.

chances are you're getting close to the leak if the fuel odor is getting stronger.

Aug 10, 2008 | 1989 Honda Prelude

Not finding what you are looking for?
1989 Honda Prelude Logo

Related Topics:

383 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...