Question about Infiniti QX4
SOURCE: The drivers seat is stuck.
Our 2002 has had this problem twice. The first time, we removed the 4 bolts holding down the seat, and jiggled the seat - it started working on it's own. The second time, the seat was too far back to get to the rear 2 bolts. We removed the front 2 bolts and tried to tap the motor - to no avail.... Later that day, the seat started to move again - but one side was stuck, and it seemed to have stripped a gear. Now it looks like a trip to the dealer...
Posted on Jul 28, 2008
I just had the same problem. When the seat is powered all the forward, one of the worm drives reached the end of its travel and jammed against the threaded block that it passes through. To fix this the seat has to be unbolted and tipped back. There are four tiny 6mm bolts that hold the motor plate in. Remove these and the motor will come out. The worm drive is bolted in at one end and has a set pin at the other. Remove the worm drive and use a couple of vice grips or equivalent to loosen the threaded block from the worm drive.
Posted on Jun 21, 2009
check fuse.if fuse is good check for power at seat motor.if yes replace seat motor.if no check wires at switch.if wires is not loose or broken seat motor switch could be bad.
Posted on Dec 13, 2009
needs a forward/rearward motor. it has two separate motors under the seat. very common and i replace them all the time. good luck
Posted on Mar 26, 2010
Tips for a great answer:
Feb 19, 2014 | Cars & Trucks
Aug 29, 2013 | 2002 Chevrolet TrailBlazer
Dec 05, 2012 | Cars & Trucks
Jun 26, 2010 | 2005 Lincoln Navigator
Jun 04, 2010 | Chevrolet Silverado 2500HD Cars & Trucks
Aug 21, 2009 | 1995 Lexus GS 300
Aug 17, 2009 | 2005 Buick Rainier
Jun 02, 2009 | 2001 Volvo V70
Jun 02, 2009 | 2004 GMC Envoy
Aug 25, 2008 | 2001 Lincoln LS
May 18, 2017 | Infiniti Cars & Trucks
131 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: