At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I have a 1993 Toyota Camry w/6 cyl. engine. It will not start on occasion.
There is no turning of the starter motor at all, no clickin g, no noise at all.
The battery, starter, and alternator are all good. There are about 148,000 miles on the car. HELP!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
P1335, No Crankshaft Position Sensor Signal - Engine Running. ... 91 1991 ToyotaCelica GTS Engine Mount Right 2.2L 4 Cyl Genuine. ... 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 . ... Powered by a 2.2-liter engine, the Celica now had ST and GT trim models. ... in 1986 and a 2.0-liter ...
31 mins ago - It is not behind pully nor in dist all videos show - Toyota Cars & Trucks question. ... Change a crankshaft position sensor on a 2000 eclipse.
toyota camry crankshaft sensor 99 camry crankshaftcamshaft position codes i got a problem with my 97 ... The car 96 toyota camry 2.2 liter 4 cyl. ... 1994 toyota camry 2.2L 257k miles Symptoms Car overheats Top radiator hose hot bottom cold ...
Jul 10, 2014 - The Toyota 5SFE motor is a four-cylinder, 2.2 liter, timing-belt-driven, double ..... Remove the lower timing belt cover with the crankshaft position sensor. ..... I've never, ever replaced the harmonic balancer on a 4cyl 5SFE.
Does the car make any noises when you try and start it..?
Try tapping the starter at the same time that someone is turning the key into the start position.
If this causes the car to crank or start, replace the starter motor.
If not, check for power at the small wire on the starter when the key is being turned.
If power is present, replace the starter.
If not, you have another issue, take the vehicle to a qualified person.
1st to do, disconnect the battery and remove, also remove battery support , the starter is located between engine and transm. behind battery, now disconnect 2 wires from starter , loose 2 bolts 14mm wrench and starter will fall in your hand , note this procedure is for 4 cyl model , 6 cyl engine same
Some times they have a different starter motor on the manual,So i would remove the starter and try and turn the engine with a prybay or large screwdriver,If it turns with the bar then the starter is the rong one for the flywheel.
×