I am locked out of my 1992 chevy silverado pickup. what is the easiest way to unlock the doors?

How to fix the Chev power window door lock switch - YouTube

? 5:04
https://www.youtube.com/watch?v=XDKaDURD8Sc
Jul 13, 2013 - Uploaded by spelunkerd
How to fix the Chev power window door lock switch ..... Some time later my drivers side window stopped working in the down position. ... These intermittent electrical problems are frustrating,aren't they? .... How To Install Replace Door Locks Chevy GMC Truck Silverado Sierra Yukon Tahoe Suburban ...

Diagnose Power Door Locks Dont Work Properly - Auto ...

www.auto-repair-help.com/.../diagnose_power_door_locks_dont_work_...

An inoperative power door lock can be caused by the switch, solenoid, wiring problem or ... Hi, I have a 2005 Nissan Sentra and the power locks aren't working. .... Hi, mypassenger door locks/unlocks both doors but my driver side door works independently and .... I have a 1986 Chevy Silverado K10 with auto door locks.

SilveradoSierra.com • 2003 silverado no power in right door ...

www.silveradosierra.com/.../2003-silverado-no-power-in-right-door-t30...

Slim Jims won't work on the door. There is a tool called The BigEasy unlock tool. You sneak it between the jam and door frame and hook it on the lock knob and pull it to unlock the door or push the power lock button to unlock the door.

Probably is the actuator. Common problem. The actuator is part of the complete door latch. Hopefully that is what you got from 'Dorman'.

Align the slim jim with the lock and push it downwards towards the keyhole.When you see the lock start to move, pull the slim jim upward slowly until the door unlocks.

yes as its no different then unlocking the car with the key.which i guess you don`t have.if the key tumbler is seized then you might have trouble.odd question if your the owner with a key to the door lock.

we have a 08 1500 crewcab chevy that all the power door locks worked excepted the drivers door. We started to look at that door power lock actuater and now the passenger power door lock does not work. Could the trouble be something other than actuaters?

this is posted in your owners man. i think you need to pull the high beem switch back and then hit the door locks once for on and twice for off depends, i have a crew cab so they have more door unlock lock choices

Instructions to program a keyless entry remote for a Chevy Silverado. They also work on 2003, 2004 and 2006 Suburbans.

1. Close all the vehicle doors.
2. Insert the ignition key into the ignition lock cylinder.
3. Press and hold the DOOR unlock switch.
4. While holding the DOOR lock switch in the unlock position, cycle the ignition ON, OFF, ON, OFF.
5. Release the DOOR unlock switch. The doors will lock and unlock to confirm the program mode.
6. Press and hold the LOCK button and the UNLOCK button simultaneously on one keyless remote. After a delay of approximately 15 seconds, the doors will lock and unlock to confirm the programming of that transmitter.
7. Repeat the previous step to program up to four transmitters.
8. Turn the ignition switch to the RUN (one more click forward) position in order to exit the keyless entry transmitter mode.
9. Operate the transmitter functions in order to verify correct system operation

i work at a chevy dealership,just had the same problem my fix was to replace the power door lock relay located on drivers side interior fuse block