Question about 1996 Ford Mustang

1 Answer



Posted by on

  • 1 more comment 
  • JAMH Jul 31, 2008

    the sprayers dont let fluid out , and it dosnt make no sound

  • Jeffrey Pemberton
    Jeffrey Pemberton May 11, 2010

    Sorry - I'm not getting informed of your comments. I can't even see mine. So if I have this right (let me know if I don't) your wipers work but there's no fluid coming out. I asked if there was a noise because when you try and spray the fluid you should at least hear the fluid pump trying to work. You could check the nozzles at the winshield end to make sure they're not clogged and make sure the hose in the fluid tank is not clogged but I'm sure you've probably done this. Just to be sure, with the hood open have some else try the fluid spray while you listen to the pump motor. Do this with the car off but the key on enough so the elsctrical systems are engaged. The pump motor should be located on the firewall just in front of the driver. Listen to see if it tries and pumps fluid. If not, odds are you need a new pump. Fairly cheap. Around $15-30 depending on the cars configuration. Let me know what you find out.

  • Jeffrey Pemberton
    Jeffrey Pemberton May 11, 2010

    Do the wipers not move at all or does the fluid not spray out? Do you hear any noise like something trying to work?



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,533 Answers

In most cars the motor is in the washer solvant reserviour go to a salvage yard instead of a dealer and you can get one very cheap just have yours out of the car and have some washer solution in most cases they will let you try it first to see if it works

Posted on Jan 05, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Fuse location for windshield washer pump on 2003 mustang gt

Besides a fuse ,also has a relay . Fuse F2.26 - 30 amp - location central junction box. ( inside the vehicle fuse box )

May 01, 2018 | Cars & Trucks

2 Answers

My 2001 mustang cobra windshield wipers wont work

Did you ever fix this problem I have a 03 mustang cobra same problem Please help

Feb 05, 2012 | 2001 Ford Mustang

1 Answer

What fuse works the windshield washer pump on a 2006 mustang

No they use the same fuse. The pump motors do go out. they are easy to change

Jan 04, 2012 | 2006 Ford Mustang

1 Answer

Need to know how to put the top down on 96 mustang dont have manu

First thing to do is put the car in park and then set the parking brake. Next, release the drivers and passenger side handles (located at the top, above your head when you are sitting in the car, where the part of the top meets the windshield) Both handles are black and you simply pull the lever to release the hooks. After both hooks are released, push the button located near the speedometer (should be underneath the speedometer) on the dash and the top motor will engage and begain to retract the top. Hold the button untill the top disapears behing the back seat

Feb 28, 2010 | 2007 Ford Mustang GT California Special...

1 Answer

Windshield washer won't work/has never been in

there is a little motor in the waser bottle that needs replaced there cheap at auto zone

Nov 16, 2009 | 1992 Ford Mustang

2 Answers

Windshield Washer Pump does not operate on 02 Accent

Your Accent has rear wiper/washer.. correct? That's where the 3rd wire comes in. They sold you/you bought the wrong pump. Here's the wiring diagrams:

Jun 01, 2009 | 2002 Hyundai Accent

1 Answer

Windshield washer fluid is not being pumped out

Has it got to below freezing in your area recently? If so, your fluid is probably frozen and will need to be replaced. That is the only thing I can think of. It happened to me recently! Good luck I hope this helps

Dec 18, 2008 | 1999 Ford Mustang Cobra

2 Answers

96 mustang gt wont stay on unless im giving it gas

Since the date in this post was a few years ago, I'm just gonna put it on here for someone else who may encounter the same issue. My '96 did the same exact thing. It was IAC (idle air control) valve. $50 and runs perfect...

Nov 29, 2008 | 1996 Ford Mustang

2 Answers


check freon in system if not enough freon compressor wont kick in

Aug 03, 2008 | 1998 Ford Mustang

2 Answers

96 mustang gt tranny problem

my 96 mustang wont go into gears what must i do my is winston

Jun 07, 2008 | 1996 Ford Mustang

Not finding what you are looking for?
1996 Ford Mustang Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

5687 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides