Question about 2005 Chrysler Pacifica

2 Answers

Abs light just started staying on - 2005 Chrysler Pacifica

Posted by on

  • Anonymous Apr 09, 2009

    I had the same problem, had my wheel sensor replaced at an establishment that will remain for the moment nameless and my light is still on. They initially said that we got a bad part from the dealer then they said that the part is fine and the problem is further down the line? Any thoughts that dont end with me replacing the wiring harness?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

In other words its the abs sensor it will cost you 70 at oreillys you can change your self if you know how to work on cars and all cars abs sensors go out not just pacificas but braking wil be different its going to need more time to stop than it will with abs

Posted on Dec 29, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Mike -- Had same problem and it was diagnosed as bad wheel speed sensors. They corrode and are a known problem for Pacifica's. I had mine done at local chain repair shop rather than dealer and saved about $150. Good luck

Posted on Oct 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why does my ABS light stays on and sometimes i get a vibration in the brake petal causing my 2002 Cadillac escalade not wanting to stop?


Sounds like a fault with the Antilock Braking System. The vibration in the pedal is the ABS working. With your foot on the brake pedal, it releases and re-applies the brakes to stop a skid from the wheels locking up. You need professional service for brakes.

Seems to be a known issue on all Cadillac and requires the ABS module to be replaced.

ABS Light Due to ABS Control Module Failure : Cadillac ...

repairpal.com > Problems > Cadillac > DeVille Cadillac DeVille ABS Light Due to ABS Control Module Failure. This is a verified problem based on 126 reports. Learn more about this problem, when it occurs ...

ABS Light Due to ABS Control Module Failure : Cadillac ...

repairpal.com > Problems > Cadillac > Seville STS Traction control and ABS lights stay on dash. This is due to ecbtm Module gone bad. replace Module and this should fix the problem. You can go by the VIN and ...

ABS Light Due to ABS Control Module Failure : Cadillac ...

repairpal.com > Problems > Cadillac > DeVille DTS ABS Light Due to Control Module Failure on Cadillac DeVille DTS. The anti-lock ... ABS and Traction control light stays on. ... abs light to abs control stay on.

ABS Light Due to ABS Control Module Failure : Cadillac ...

repairpal.com > Problems > Cadillac > Seville SLS ABS Light Due to Control Module Failure on Cadillac Seville SLS. The anti-lock brake ... SLS135,000Jumsee. Abs and traction lights stay on when started.

Jan 12, 2016 | Cadillac Cars & Trucks

1 Answer

Esc light and the abs light stay on in my 2007 hyundia santa fe


abs will be abs sensor is in hub bearing.next is the engine code?

Feb 26, 2013 | 2006 Hyundai Sonata

1 Answer

Abs light stays on, after changing brakes, 1997 caddy deville


ABS light comes on with ignition then should go off when you start the car.
If abs sensor does not turn off after disconnecting the battery, then there is a real problem, a faulty sensor or ABS malfunctioning.

Jun 11, 2012 | Volkswagen Caddy Cars & Trucks

1 Answer

Abs light on dash stays on after starting up


That abs light staying on after starting up is an indicator of a problem within the abs braking system. Have it checked out soon because whenever that light is on, you have no anti-lock brakes, just regular brakes.

Feb 23, 2011 | Honda Accord Crosstour Cars & Trucks

1 Answer

Yesterday the Brake light and the ABS light stayed on when I started up my car (2001 Jimmy). I drove it home from the store (approx 3/4 mile) and parked it. Later I started the car up and the lights did...


yes its better to go shop and check what is the code so that u can easy to diagnose and repair..some problem of the abs light come in out is some abs defective or loose ,,or the abs motor ssy have problem or sensors in the wheel.

Aug 30, 2010 | 2001 GMC Jimmy

1 Answer

Abs light stays on.


that is the auto check system, if when you start the car the abs light stays on then you have a problem,

Jul 04, 2010 | 1996 Cadillac DeVille

1 Answer

Abs light stays on!


unhook the battery, the light should go off...if the light comes back on then you may need to get your abs checked

Aug 19, 2009 | Ford Festiva Cars & Trucks

1 Answer

Abs light on always


Have you checked your brake fluid? It may be low or an indication that the brake pads are worn, causing the light to stay on.

Apr 27, 2009 | 2003 Kia Sedona

3 Answers

Warning lights staying on after engine started


probably the shuttle valve in the ABS unit is defective, solution renew shuttle valve, dont let dealership sell you a new ABS unit very expensive

Mar 08, 2009 | 2000 Land Rover Discovery

1 Answer

Abs light in 1999 chevy malibu


1999 chevy malibu abs light stays on

Jan 06, 2009 | 1999 Chevrolet Malibu

Not finding what you are looking for?
2005 Chrysler Pacifica Logo

737 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...