Question about Plymouth Sundance

1 Answer

I have check all the fuses I can think of and just replaced the headlight relay fuse and I still have no headlight. A friend of mine jump started my car the other day and touched the jumper cables together while they were still hooked to my car. Don't know if that did anything, but after that I have no headlights or radio, and only one brake light.

Posted by on

  • Anonymous Nov 08, 2008

    I found that if I clicked the headlights to high beam and back the headlights started working again. I will be replacing the high beam switch next week.



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 76 Answers

I would replace the bulbs wich dont work and take the radio out and see if there is a fuse behind there as there usually is as this could of blown causing the radio not to work.

Posted on Jul 30, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I lost the high beam of the headlights on my 2006 Suzuki Boulevard C50. Thinking that it just needs a bulb replacement I bought a new bulb replaced it and the high beam still didn't work.

I would 1st check your fuses......Might be in the car, or some also have fuse locations under the hood. Also check your relays (The big ones in with the fuses). Take one out the same size....i.e. if headlight relay is same as headlight, change relays and see if this does anything. If not fuses or relays, try cleaning the connector to your high beam....may just be corrosion or build up......

Mar 14, 2016 | Suzuki Cars & Trucks

1 Answer

I think the multi-function switch is bad on my 2005 Ford Taurus SE.The windshield wipers are functioning continuously.The fuse box is located under my hood. Which fuse can I pull to "kill" the wipers?

open the bonnet open the black fuse and relay plastic box. Listen for the relay kicking in or you may be able to feel the relay or look on the cover for the relay location. Pull out the relay .
I have a faulty headlight switch myself and had to hard wire my head lights on with a jump wire. The relay is in my pocket until I can get a new headlight indicator stalk. You may be able to jump wire the wipers with spade connectors to work with a jump wire in case you need wipers until you can replace the wiper stalk .
It could be a stuck relay causing the fault rather than the switch. you need to check if switch causes voltage to turn off accross the relay coil in the relay mount block.

Jul 08, 2015 | Ford Cars & Trucks

1 Answer

I think the headlight fuse is blown for my 92 geo metro, but the fuse box doesnt have a cover anymore so i cant tell which fuse to replace. can u help me?

Headlights are not powered by a fuse. It uses a mini circuit breaker and or a main fuse located in the main fuse/relay center under hood. Have the mini circuit breaker checked. The fuses/relays are marked in the main box.

Dec 11, 2010 | 1992 Geo Metro

1 Answer

1996 Jeep Cherokee Sport. My low beams will flash on and off along with the dash lights after a few minutes of driving. I am now forced to drive with my high beams on.

Sounds like a relay may need to be replaced. Check all of your fuses. Check the relays. I believe the Jeep has a relay for the headlights I could be mistaken. It would be my guess. But also, how long since you replaced the bulbs. A friend of mine had hers flicker when it was a "friendly reminder" to replace. But when you change something, it's always smart to replace the fuse that goes with it.

Best of Luck

Apr 02, 2010 | 1996 Jeep Cherokee Sport

2 Answers

Headlight does not work. Not the bulbs. I have a 2006 Chevy Colorado and the passenger side headlamps went out. I replaced the bulbs which looked good (filaments where not broken) but the lamps are still...

Believe it or not you've actually got a fuse for the left and right headlight individually. Check both of these and also You've got a power control center under the hood(drivers side and I "think" another either behind the drivers seat or ucer the dash, and these fuses and relays are often repeated in both power centers(fuse and relay boxes). Grab your owners manual, which now is thicker than the King James bible,and begin your search. Also make sure,if it has one, that the ground from the headlight on that side , is good. Good luck my friend, Dana

Aug 31, 2009 | 2006 Chevrolet Colorado

2 Answers

Won't start

ok you have spark? if you do check the relays for the fuel pump. if theses are good. then check the fuel shut off switch located in the rear trunk behind the fabric. if this was not triggered check the fuses for the igniton in the fuse box underneath the hood and or dash.

Aug 29, 2008 | 1995 Ford Probe

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

184 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts


Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides