Question about 2000 Jeep Grand Cherokee

2 Answers

Hitch installation w/electrical wiring for brake

Had a hitch installed and have had electrical problems ever since, not sure if this is just a coincidence or related. Car will not start. I have a loud clicking noise in the dashboard and gauges are going crazy. Also when I step on the brake this all stops and sometimes I can get the car to start. I have a 2000 Jeep Grand Cherokee.

Posted by on


2 Answers

Thanks Keith, they came out to my house and did just that and put it back together right this time. Only took them three tries but they did fix it so I give them that. I wouldn't part with my jeep for the probably anything. Thanks for your reply.

Posted on Aug 09, 2008

  • Level 1:

    An expert who has achieved level 1.


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Contributor
  • 30 Answers

Disconnect all that trailer connector mess and start over. Someone messed up. Do you have a 6- or 7- way RV connector, a 4- or 5-way flat (U-Haul) connector, or what? Was an electric brake box installed under the dashboard for trailer electric brakes?

Better yet, sell me your Jeep cheap, it probably can't be fixed, and it's worthless.

Posted on Aug 09, 2008


2 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 30 Answers

SOURCE: Hitch w/electrical wiring brakes

Disconnect all the hitch wiring and test for ability to crank. Someone did the hitch hookup incorrectly, or damaged other wiring hooking it up.

Posted on Aug 09, 2008

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I wanna hook up a trailer brake controller but cant find the wire that runs so the trailer brakes any ideas?

Does your trailer have a braked trailer hitch?see,0s372x176.jpg The wire runs from the hitch to the rear wheels of the trailer and is activated by a spring in the hitch which gets compressed when the vehicle brakes.

May 01, 2011 | Ford F-350 Cars & Trucks

1 Answer

I want to install a trailer hitch and wiring harness. Is there already holes in the frame to install the hitch aand is there already wiring that can be tapped into for the wiring harness?

Yes, this is actually a quite simple installation. There are two different versions of this vehicle. With and without stow and go. They both require different hitches and mounting schemes. Both vehicles will have the same wiring however. Part number 55537 will give you the correct wiring. If your vehicle has stow n' go you will need hitch number 13389 and if it does not you will need 13362. I hope this helps!

Jul 01, 2010 | 2004 Chrysler Town & Country

1 Answer

Just put a hitch on to my e36bmw and looking to wire up electric's.need colour codes

a hitch...why,... you don't like the transmission? You have an extra one and are just dying to install it after this one goes **** up.

brown=ground on all german cars

red, black=power

Jun 20, 2010 | BMW 3 Series Cars & Trucks

1 Answer

I have 2003 kia sadonna, rear tail light and licence plate lamp don't light up. Everything else is Okay, brakes and signal etc. I checked fuses they all seem to be okay, Allthough on my vechicle where it...

Hi, you have a cut or damaged wire between the left tail light and the license plate. This could have been caused by the hitch installation. The hitch is using the same fuse.

Jun 12, 2017 | 2006 Kia Sedona

1 Answer

Does a 1994 buick centry come with a hitch and if not what is every thing that i need for a hitch

No it's doesn't come with a hitch. To put one on you'll need to know what capacity hitch you need, towing weight of what is to be towed. A wiring harness to connect to the vehicle's brake lights, taillights and turn signals. U-Haul sells and installs hitches.

May 09, 2010 | 1994 Buick Century

2 Answers

Looking for tow capacity for a 1988 Nissan Pathfinder XE 6 cyl automatic

Depends on what type of two hitch you use there are three class's class 1 and class 2 and 3. since the path finder is about 3000 pounds if you have the class 2 hitch assemble that will bolt up to the frame your could pull 800 pounds without to much wear and tear on the transmission and more importantly the brakes. The vehicle is not designed with a lot of extra brake on board unless you buy it with a hitch so buy the hitch and be sure whatever you pull has electric brakes you will have to adjust the electric brake controller to slightly apply brakes before you pathfinder applies also you need the right tongue weight the reason for this is to keep your rig your pulling from jack knifeing if you have to slam on the breaks. If you have never pulled before this is the highest I would recommend pulling. I have seen people pull as much as 1200 pounds but it's more wear and tear on the van than it's worth. Hope this helps.

Apr 21, 2010 | 1988 Nissan Pathfinder

2 Answers

Install trailer hitch wiring kit

Sould be a simple plug in harness under rear of vehicle

Mar 05, 2010 | 2006 Chrysler Pacifica

1 Answer

Were do you hook up the two wires under the hood for trailer brakes on a 2000 silverado

Sometime around 2000, GM started putting trailering pre-wire harnesses in the vehicle. Your truck may have this harness built in and would greatly simplify brake controller installation. Look under the glovebox and see if there is a wire harness tied off. There will be four wires in this harness, which should be run over to the steering column to use it. Most trailer brake controllers are compatible with this harness.
The four wires in the harness are: Red, 12vdc; black, ground; blue or purple, brake pedal; and brown or white, trailer brake wire to seven pin, four pin, or five pin connector at trailer hitch, if your truck came from the factory with a trailer hitch.
If you are adding the hitch and do not have the four wire harness, the under hood wires from your brake controller are Red, connect to one of the studs under the distribution box cover (the distribution box is on the driver's side against the firewall. Underneath the cover are two large threaded studs which are hot from the battery all the time); and the other wire from your brake controller would have to be run the length of the truck along the frame, tied off in several places, to the trailer hitch connector on the bumper. Follow the directions that came with trailer hitch wiring connector to connect this wire to the proper pin in the connector.
If this has helped you, great, and please remember to vote/comment.
Good luck!

Feb 21, 2010 | 2000 Chevrolet Silverado 1500

1 Answer

Which fuse controls aftermarket trailer lights 2001 highlander?

tail lights and brake lights, if u had factory wiring then it will be marked trailer tow fuse.

Apr 01, 2009 | 2001 Toyota Highlander

1 Answer

Hitch w/electrical wiring brakes

Disconnect all the hitch wiring and test for ability to crank. Someone did the hitch hookup incorrectly, or damaged other wiring hooking it up.

Jul 30, 2008 | 2000 Jeep Grand Cherokee

Not finding what you are looking for?
2000 Jeep Grand Cherokee Logo

174 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides